Industries / Consumer goods / Furniture
Flat-pack and assembly
Designing furniture to ship in pieces, the fittings that join those pieces, and the work of putting them together, whether by the buyer, a paid fitter or a robot.
7
Milestones achieved, from 1859 to 2018.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1859
Chairs shipped in pieces
Thonet's chair No. 14, designed in 1859, is made of six pieces of steam-bent beech that pack flat and join with ten screws and two nuts, by the Philadelphia Museum of Art's description. Thonet says 36 taken-apart chairs, screws included, fit in a transport box of one cubic meter. The Victoria and Albert Museum (V&A) calls Thonet's the first furniture "both mass produced and shipped knocked-down", but notes the chairs were put together by Thonet shops or distributors, not by buyers. Thonet says more than 50 million No. 14 chairs had been made by 1930; the V&A says "some 50 million" were said to have been made between the 1860s and the 1930s.
Credit
Michael Thonet and his sons' firm, Gebrüder Thonet, Vienna
1953
Self-assembly at IKEA
IKEA's first self-assembly products were the DELFI, KÖKSA and RIGA tables in its 1953 catalog, by the IKEA Museum's account. The LÖVET coffee table in the 1956 catalog could be packed into a small flat pack. In 2012 the jury of the Tenzing Prize credited the designer Gillis Lundgren with inspiring IKEA's launch of flat packages "on a grand scale".
Credit
IKEA, founded by Ingvar Kamprad; Gillis Lundgren
1983
A hidden panel connector
Häfele's Minifix connector first came off the production line in 1983, the trade magazine Furniture Production reports. A round eccentric housing, a cam, sits in one panel and a pin in the other, and turning the cam clamps the two panels together, so the piece can be built without glue and taken apart again. The magazine says it paved the way for flat-pack furniture that buyers build themselves. By Häfele's figures it now comes in more than 30 versions and its Berlin plant makes over 500 million a year.
Credit
Häfele
1999
Flat sofas fall flat
Upholstered sofas are hard to pack flat, and IKEA failed twice. Its TULLANÄS sofas, developed in the late 1970s, had steel frames that buyers screwed together and then covered; the covers made in South Korea arrived in such varied colors that the sofas could not be sold, and the IKEA Museum calls their assembly instructions the most incomprehensible IKEA ever produced. In 1997 IKEA launched a.i.r, inflatable chairs and sofas developed with designer Jan Dranger's firm SoftAir, which IKEA expected to cut transport volume by up to 90%. The products cost too much, lost air and drew many returns, and IKEA left the joint venture in September 1999.
LessonPacking bulky furniture flat saves freight only if the product still works once the buyer has put it together.
Credit
a failure; IKEA and SoftAir
2017
Assembly becomes a service
After a pilot in its London stores from November 2016, IKEA Group signed an agreement on 25 September 2017 to buy TaskRabbit, a platform that matches customers with independent workers, called Taskers, for jobs such as furniture assembly. TaskRabbit then worked in 40 US cities and London and stayed a separate company.
Credit
IKEA Group (Ingka) and TaskRabbit
2018
A robot builds a chair
A team at Nanyang Technological University in Singapore had two industrial robot arms, with grippers, wrist force sensors and a 3D camera, assemble IKEA's STEFAN chair. The robot took 3 seconds to locate the parts, 11 minutes 21 seconds to plan its motions and 8 minutes 55 seconds to assemble the chair, the university reported with the paper in Science Robotics in April 2018. The team's next aim was for the robot to learn the steps from human demonstration.
LessonIndustrial arms are built to position precisely and are poor at controlling force, which fitting parts together needs, in the team's words.
Credit
Francisco Suárez-Ruiz, Xian Zhou and Quang-Cuong Pham, NTU Singapore
2018
Snap-in legs, timed
IKEA says its wedge dowel, table legs with grooved V-shaped tops that slide into slots, cuts assembly time by 80%. In an informal test published in August 2018, Consumer Reports had two people build the wedge-dowel LISABO coffee table in under 5 minutes and about 7 minutes; it still needs the included Allen wrench. IKEA's older HEMNES table, with 100 parts including 84 pieces of hardware, took them 42 and 62 minutes, and both found its wordless instructions unclear. The STOCKHOLM table, whose legs screw straight into the top, took 1.5 and 2 minutes.
LessonThe 80% saving held against a 100-part table but not against a simpler one, so a claimed saving depends on what it is compared with.
Credit
IKEA; test by Consumer Reports
Watch for
Robots learn full-size assembly
A team at Mitsubishi Electric Research Laboratories (MERL) says its FurnitureVLA system, a vision-language-action model (an AI model that takes in camera images and an instruction and outputs arm motions) trained in steps, raised average success at assembling three full-size IKEA items in simulation from 48% to 80% against baselines. On two real Kinova Gen3 arms building the IVAR chair, it reports success "only 16%" lower than in simulation over 15 attempts, with magnets glued into the screw holes in place of screws.
Achieved whenan outside lab repeats the real-robot result with the released method, or the team reports real builds that use the furniture's own screws.
Claimed by
Chenyang Ma, Diego Romeres and colleagues at MERL, July 2026
Humanoid builds a child's table
At the IROS 2026 Humanoid IKEA Assembly Challenge in Pittsburgh, teams ran AI policies on a Unitree G1 humanoid robot to attach four twist-on legs to the top of IKEA's UTTER children's table within 18 minutes, with no remote control and points lost for each human touch. Mitsubishi Electric says its joint team with MERL, MEL-Craft, earned the highest score and worked without human help; its team lead says some planned technology was not achieved. The organizers' site, run by people from Google DeepMind, Unitree, Lightwheel and Frodobots, listed no results in November 2026.
Achieved whenthe organizers publish the scores and how far each team's robot got.
mitsubishielectric.co.jphumanoid-ikea-assembly-challenge.github.io
Claimed by
Mitsubishi Electric, October 2026
Open
01
Robots that fasten flat packs
A robot setup that builds a store-bought panel product, such as a small bookcase or bedside table held together by dowels, screws and cam locks, from the opened box, doing every fastening step itself: pressing in dowels, driving screws and turning cam locks, with the tools in the box or a powered screwdriver.
The briefCredit · unclaimed02
Strength after moving house
Open test data on how much holding strength common flat-pack joints lose each time furniture is taken apart and rebuilt, for cam connectors, screws and dowels in particleboard and MDF (medium-density fiberboard, a panel pressed from wood fibers), with a plain guide to how many rebuilds a piece can take.
The briefCredit · unclaimed
Open 01 · the brief
Robots that fasten flat packs
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot setup that builds a store-bought panel product, such as a small bookcase or bedside table held together by dowels, screws and cam locks, from the opened box, doing every fastening step itself: pressing in dowels, driving screws and turning cam locks, with the tools in the box or a powered screwdriver.
Why it is still open
Published robot builds skip or simplify the fasteners. Manual2Skill (2025) reads IKEA manuals with a vision-language model and assembled four real IKEA items in 10 trials each, but its authors say it "does not cover the automated execution of fastening mechanisms, like screwing or insertion actions". FurnitureVLA (2026) put magnets in the screw holes of IKEA LACK, KALLAX and IVAR parts and calls tool use "an open challenge". The IROS 2026 challenge used a table whose legs twist on by hand, with no tools. NTU's 2018 robot built one chair, and MIT's IkeaBot (2013) used specialized tools on a kit described by its CAD file. Epoch AI, a research group that tracks AI progress, rated IKEA assembly at the "early research stage" in February 2026; the closest case it found, a UC Berkeley robot that built a simple shelf in 2025, placed the planks while "a human performs all the actual screwing". Searches in November 2026 found no robot that turned the cam locks and drove the screws of a store-bought flat pack.
arxiv.orgarxiv.orghumanoid-ikea-assembly-challenge.github.ioepoch.ai
Built with what exists
Two collaborative robot arms with a wrist force-torque sensor and a screwdriver end tool; LeRobot to record and replay teleoperated demonstrations (see the Note "No download"); an open robot model such as NVIDIA's GR00T 2 (see the Note "Five demonstrations per task") or Runway's Praxis-1 (see the Note "Open robot model weights") fine-tuned on those demonstrations; Manual2Skill's published code to turn the paper manual into a step order.
First step
Buy one small cam-lock bookcase, film yourself building it with a head-mounted camera, and list every fastening motion and tool, step by step.
Done looks like
20 filmed attempts on one product, each from a new layout of the parts, with every dowel, screw and cam lock fitted by the robot; a published tally of finished builds, human touches, fasteners missed or stripped, and time against a first-time human builder; then 10 attempts on a second product not used in training.
Open 02 · the brief
Strength after moving house
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Open test data on how much holding strength common flat-pack joints lose each time furniture is taken apart and rebuilt, for cam connectors, screws and dowels in particleboard and MDF (medium-density fiberboard, a panel pressed from wood fibers), with a plain guide to how many rebuilds a piece can take.
Why it is still open
EN 17869:2023, the European test method for connectors in panel furniture, covers strength and overload tests; its published scope excludes aging and does not mention repeated assembly. A 2026 Lund University thesis done with IKEA Components pulled expander dowels out of particleboard once, under X-ray scanning, and found small areas near the dowel teeth stayed permanently damaged. A 2025 comparison of furniture joints by Jančíková and colleagues lists the "possibility of repeated disassembly" as a criterion without testing it. A 2021 study from the University of Zagreb (Župčić and colleagues) states that fittings such as Minifix let furniture be taken apart and rebuilt when moving house without losing strength, except for the confirmat screw, but it broke each of its 120 test joints only once. Vassiliou and Barboutis (2005) measured how hard the screws of cam connectors pull out of particleboard and MDF, also once. Searches in November 2026 found no published test of joint strength across repeated rebuilds.
genorma.comlup.lub.lu.serepozitar.mendelu.czhrcak.srce.hrjwoodscience.springeropen.com
Built with what exists
A universal testing machine in a university wood lab, or a homemade pull rig with a 500 kg load cell, an HX711 amplifier and an Arduino; a torque-limiting screwdriver so every rebuild is tightened the same; off-the-shelf cam connectors, confirmat screws and wooden dowels.
First step
Cut 20 particleboard test pieces, fit one cam connector type, and pull 10 apart new and 10 after three rebuilds.
Done looks like
For four fittings in two board types, 10 specimens each, the force needed to pull the joint apart when new and after 1, 3, 5 and 10 rebuilds, with raw data and photos under an open license, and the same test on joints cut from five used pieces bought second-hand.