Industries / Consumer goods / Furniture
Design
Deciding what a piece of furniture looks like, what it is made of and how it holds up in use, including the strength and stability tests it must pass before it is sold.
6
Milestones achieved, from 1754 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1754
A pattern book for furniture
Thomas Chippendale, a London cabinetmaker, published The Gentleman and Cabinet-Maker's Director, a book of 160 engraved plates showing furniture his workshop could make. More than 300 subscribers paid for it in advance, both wealthy clients and fellow cabinetmakers who could adapt the designs. It sold well enough for a second edition within a year and a third in 1762. Makers across Europe and America copied its designs, so "Chippendale" became the name of a whole style. Guinness World Records calls it the first furniture pattern book of its kind and notes that some furniture designs had been published before it.
Credit
Thomas Chippendale; Matthew Darly engraved most of the plates
1925
Chairs from steel tube
Marcel Breuer, aged 23 and head of the Bauhaus woodworking workshop in Dessau, Germany, designed the B3 club chair from bent steel tubing. He said the idea came from the handlebars of his Adler bicycle. The Centre Pompidou describes the chair as both light and sturdy and says its bare frame broke with the ornamented furniture of its time. Decades later the Italian maker Gavina reissued it as the "Wassily" chair.
Credit
Marcel Breuer, at the Bauhaus
1968
The office goes modular
Robert Propst, director from 1960 of the Herman Miller Research Division in Ann Arbor, Michigan, designed Action Office, a system of free-standing panel walls that could be rearranged into work nooks and meeting areas. The first version, designed with George Nelson in 1964, sold poorly: it cost too much, and managers worried about its open borders. Propst reworked it alone into Action Office II in 1968.
LessonPanels meant to be moved were fixed to the floor in rows, and The Henry Ford museum credits Action Office II with spreading the "cubicle farm" it was not designed to create.
Credit
Robert Propst and Herman Miller
1972
One-piece plastic chair
Henry Massonnet, a French engineer, designed the Fauteuil 300, a chair molded from plastic in one piece, and by making the process more efficient cut the time to make one to under two minutes. The first mass-produced one-piece chairs, from the late 1950s and 1960s, included Verner Panton's Panton Chair and Vico Magistretti's Selene. The Vitra Design Museum calls the Fauteuil 300 the archetype of the cheap plastic "Monobloc" chair, which it describes as the most widely used piece of furniture in the world. Many companies sold similar chairs from the 1980s.
Credit
Henry Massonnet
2019
A chair from generative design
Philippe Starck designed the A.I. chair for the Italian maker Kartell with prototype generative design software from Autodesk. Generative design software proposes shapes that meet goals a designer sets. Starck's goal was a comfortable, stable chair using the least material, and the software was taught the limits of injection molding, the process Kartell uses to make it. The chair launched at the Salone del Mobile furniture fair in Milan in April 2019. Autodesk calls it the first chair designed with artificial intelligence to go into production; the Dezeen video that reports this was produced for Autodesk.
Credit
Philippe Starck, Kartell and Autodesk
2023
Dressers must pass tip tests
Dressers, chests and wardrobes can tip onto children who climb or pull on them. The US Consumer Product Safety Commission (CPSC) counted 199 child deaths from such tip-overs between 2000 and April 2022, and 43 recalls covering about 21.5 million units between 2000 and July 2022. The STURDY Act, signed on 29 December 2022, made the voluntary standard ASTM F2057-23 mandatory from 1 September 2023. Every unit 27 inches (69 cm) or taller must stay upright with loaded drawers open, under a 10-pound (4.5 kg) pull, and with 60 pounds (27 kg) on an open drawer while tilted forward on a 0.43-inch (11 mm) block that stands in for carpet. In Consumer Reports' 2024 tests of popular dressers, the 10 that passed were all made after the rule took effect, and two made before it failed.
LessonThe earlier version, ASTM F2057-19, tested empty drawers with a 50-pound weight and no carpet; of 95 fatal child tip-overs, CPSC staff found 2 units that met it, 11 that did not and 81 they could not judge.
Credit
the US Congress, the CPSC, ASTM subcommittee F15.42 and the parents' group Parents Against Tip-overs
Watch for
A designer's style, learned
Google DeepMind fine-tuned its Imagen image model on sketches by the designer Ross Lovegrove, generated hundreds of chair concepts in his style, and used Gemini to view one, "Seed 6143", from several sides. The team turned it into a CAD model and printed it in metal with a robot arm. Lovegrove called the result "not bad" and said he would change it "quite radically" if he stepped in more.
Achieved whena chair designed this way passes a published strength test for seating, or is made in series and sold, as reported by someone outside the project.
Claimed by
Google DeepMind with Lovegrove Studio and the design office Modem, October 2025
Sales data to machines
HOMAG, a German maker of woodworking machines, says its HOMAG INTELLIGENCE platform is "the first cloud-based solution on the market" to connect the data from selling a piece of furniture through to production and the machines, whatever machines or software a company already uses. HOMAG made it the highlight of its stand at the Ligna trade fair in Hanover.
Achieved whenfurniture makers using it publish measured changes in order errors or lead times, or an outside party measures them.
Claimed by
HOMAG, May 2025
Open
01
Tip check for older dressers
A method, guided by a phone app, that tells a household whether a dresser it already owns would pass the ASTM F2057-23 stability tests. The owner first ties the dresser to the wall with an anti-tip strap so it cannot fall, opens the drawers, and pulls down on the edge of the top drawer with a cheap force gauge or luggage scale, reading the force at which the back feet start to lift. The app turns that force and the drawer's reach into a tip-over moment, the turning force about the front feet, and compares it with the moment the standard's 60-pound (27 kg) test applies. A public table lists results by make and model.
The briefCredit · unclaimed02
From request to tested cabinet
A pipeline in which a person types a request, such as "a bookcase 180 cm tall for a narrow hall", an AI model writes the design as code, and the pipeline puts out a parts list and cutting files for 18 mm plywood. The parts are cut, assembled and tested for strength and stability to a published furniture standard for storage units, such as EN 14749:2016, with no person editing the design.
The briefCredit · unclaimed
Open 01 · the brief
Tip check for older dressers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A method, guided by a phone app, that tells a household whether a dresser it already owns would pass the ASTM F2057-23 stability tests. The owner first ties the dresser to the wall with an anti-tip strap so it cannot fall, opens the drawers, and pulls down on the edge of the top drawer with a cheap force gauge or luggage scale, reading the force at which the back feet start to lift. The app turns that force and the drawer's reach into a tip-over moment, the turning force about the front feet, and compares it with the moment the standard's 60-pound (27 kg) test applies. A public table lists results by make and model.
Why it is still open
The US rule covers only units made after 1 September 2023, while the CPSC estimated that about 230 million clothing storage units were in use in 2021. Consumer Reports found in 2024 that listings and labels often lack a manufacture date, so owners cannot easily tell whether a unit meets the rule. The tests found in November 2026 were all done in labs, by Consumer Reports, the American Home Furnishings Alliance and the CPSC. The nearest simple method is a 2020 student design project at the University of Michigan, sponsored by the safety group Kids In Danger, which pulled dressers over with a rope and force gauge and built a spreadsheet of tip-over cases. It was meant for companies checking a design, and its page reports no comparison with ASTM F2057. No published method for owners to measure their own unit, checked against the lab test, turned up.
Built with what exists
A digital luggage scale or push-pull force gauge, a tape measure, a store-bought anti-tip strap, the ASTM F2057-23 test procedure, and a phone app built with an open framework such as Expo, using the phone's augmented-reality measuring tools (Apple ARKit or Google ARCore) to measure how far each drawer reaches.
First step
Buy five secondhand dressers, strap each to a test wall, and record the force at which the back feet lift with the top drawer open, next to the result of a 60-pound sandbag placed on the same drawer.
Done looks like
30 secondhand dressers, each tested by the home method and by the full ASTM F2057-23 procedure. The home method gives the same pass or fail as the full test for at least 27 of the 30, and the method, measurements and photos are published.
Open 02 · the brief
From request to tested cabinet
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A pipeline in which a person types a request, such as "a bookcase 180 cm tall for a narrow hall", an AI model writes the design as code, and the pipeline puts out a parts list and cutting files for 18 mm plywood. The parts are cut, assembled and tested for strength and stability to a published furniture standard for storage units, such as EN 14749:2016, with no person editing the design.
Why it is still open
The A.I. chair of 2019 and the Lovegrove chair of 2025 were single designs refined by professional teams. A system from MIT, shown in December 2025, builds chairs and shelves from a typed request, but from reusable magnetic cubes and panels, and it was judged by a user study in which more than 90% of participants preferred its designs, not by a load test. Research tools that design flat-pack furniture people can make (Fabrication-aware design for furniture with planar pieces, 2021) or that cut waste in a design (Koo, Hergel, Lefebvre and Mitra, 2016) start from a design a person makes. Prompt2CAD, a browser tool that runs on Anthropic's Claude Sonnet, turns typed requests into furniture models with STEP and DXF files for CNC machines; a reviewer for The 3D Printing Journal found in April 2026 that it handled a shelving unit, a coffee table and a cabinet reasonably well and failed on a complex armchair, and built nothing. Searches in November 2026 found no published tally of AI-designed sheet furniture built and tested to a furniture standard.
3dprintingjournal.comnews.mit.edupapers.neurips.ccarxiv.orgarxiv.org
Built with what exists
A current AI model such as Claude Fable 5.2, which Anthropic says designed prototype devices that worked (see the Note "Three working devices"); CadQuery, an open-source Python library for computer-aided design; an open nesting tool to lay parts on sheets; a CNC router at a makerspace or a commercial cutting service; weights and a test rig following EN 14749:2016.
First step
Write five requests for simple bookcases, have the model produce CadQuery code and cut lists, and check by hand whether each could be cut from standard 1,220 × 2,440 mm sheets.
Done looks like
20 requests written by people outside the team, each turned into a built piece with no edits to the design by a person. Each piece is load-tested; the number that pass, every file and every failure are published.