Industries / Transport and vehicles / Warehousing and distribution / Cold-chain logistics
Packaging
Packaging is the insulated boxes, coolants and liners that keep a single shipment cold when there is no refrigerated vehicle around it, as with parcels, air freight and doorstep delivery.
7
Milestones achieved, from 1925 to 2025.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1925
Dry ice goes on sale
Dry ice is solid carbon dioxide. It is far colder than water ice and turns straight to gas, so it leaves no meltwater. A Gale encyclopedia entry says the Prest-Air Devices Company of Long Island, New York, appears to have first produced it successfully in 1925, that Schrafft's of New York used it that year to keep ice cream frozen, and that the name "dry ice" was trademarked in 1925. A 1927 leaflet of the DryIce Corporation of America, as transcribed by a dry ice trade site, said the product let perishables travel by mail or express in throwaway paper boxes and lost about 10% of its weight a day in an approved storage box.
Credit
Prest-Air Devices Company; DryIce Corporation of America
1951
Foam that is mostly air
BASF began producing Styropor, an expanded polystyrene (EPS), in 1951: a rigid white foam that BASF says is 98% air, used from the start for insulating buildings and for packing frozen foods. Thermo Fisher Scientific wrote that EPS coolers have for decades been "the preferred external packaging for cold chain shipments" and that few waste processors recycle them. Washington State banned EPS portable coolers from June 2024 but leaves out cold-storage containers used to ship perishables, drugs, medical devices and biological materials.
Credit
BASF
2010
Test profiles from real parcels
In October 2010 the International Safe Transit Association (ISTA) released Standard 7E, which it describes as "a set of standard profiles based on exhaustive 'real world' measurements made in the parcel shipping environment": summer and winter temperature curves that a test chamber replays around a packed box. Used with ISTA's Standard 20, it lets a laboratory certify that an insulated shipper keeps its contents in range for a stated time, so that buyers can compare boxes on one basis. ISTA notes that the profiles "are general simulations not intended to represent the worst case".
Credit
International Safe Transit Association
2013
Reusable boxes measured
Reusable shippers pair vacuum insulated panels (rigid panels with the air pumped out) with phase-change materials (packs that melt at a set temperature and soak up heat as they do). A University of Minnesota study modeled a two-year clinical trial of 30,000 shipments and found that single-use boxes insulated with polyurethane or polystyrene foam caused 1,122 metric tons of CO2-equivalent emissions, against 241 metric tons for a reusable Credo Cube, which needed 772 containers in place of 30,000. The box's maker, Minnesota Thermal Science, paid for the study, which appeared in a peer-reviewed journal.
Credit
Kai Goellner and Eph Sparrow, University of Minnesota
2017
Meal kits arrive warm
Researchers at Rutgers University and Tennessee State University ordered 169 meal kits containing meat, poultry, game and seafood and measured the items on arrival. Nearly 47% of the 684 items had surface temperatures above 40 °F (4 °C), the reported range ran from −23 °F with dry ice to 75 °F, often where gel packs were the coolant, and only 5% of deliveries needed a signature, by the account Bill Hallman of Rutgers gave the 2017 Food Safety Summit.
LessonThe researchers found parcels likely to sit outside for eight hours or more, so the coolant has to outlast the doorstep as well as the journey.
Credit
Bill Hallman, Rutgers University; Tennessee State University
2020
A box for minus 70
For their COVID-19 vaccine, Pfizer and BioNTech built a thermal shipper packed with dry ice that holds −70 °C, give or take 10 °C, and can serve as temporary storage for 15 days if the dry ice is topped up, by their release of 18 November 2020. On 10 December 2020 the US Federal Aviation Administration (FAA) issued a safety alert to airlines about the large dry ice loads this would put on aircraft.
LessonDry ice gives off carbon dioxide gas, faster at low cabin pressure, and the gas can displace oxygen, so the FAA told airlines that how much a plane may carry depends on its ventilation and on the rate at which the ice turns to gas.
Credit
Pfizer and BioNTech (shipper); Federal Aviation Administration (safety alert)
2025
Cell therapies ride in vapor
Cell and gene therapies travel frozen in "dry vapor" shippers: vacuum flasks charged with liquid nitrogen that hold the load at about −150 °C in cold nitrogen vapor and move through ordinary courier networks. Cryoport, which rents out such shippers, told the US Securities and Exchange Commission that it carried commercial shipments of Novartis's Kymriah and Gilead's Yescarta by 2021, and that at the end of 2025 it supported 20 approved cell and gene therapies and 760 clinical trials.
Credit
Cryoport; the counts are its own, from its annual reports
Watch for
Feather insulation for medicines
Aeropowder makes PluumoPlus, an insulation made from recycled feathers, and plans to start US production in the first quarter of 2027. The company says its mailer keeps contents at 2 to 8 °C for 53 hours in a summer setup and 96 hours in a winter one against modified ISTA 7E profiles, and that the material insulates up to 30% better than other natural materials. The tests are the company's own.
Achieved whenAn independent laboratory publishes the same test, or a pharmacy reports routine use with logged temperatures.
Claimed by
Aeropowder, October 2026
Compostable shippers sold pre-tested
TemperPack launched a Qualified Shipper Program for pharmacies and drug makers that replaces EPS coolers with an insulation it says can be composted at home or dissolved in water. Each shipper comes with a report from an ISTA-certified laboratory and is built for one season and one temperature range, 2 to 8 °C, 15 to 25 °C or −20 °C, for 36 or 48 hours.
Achieved whenA named pharmacy reports routine use with temperature records, or an outside laboratory publishes a side-by-side test against EPS.
Claimed by
TemperPack, September 2025
Open
01
Open parcel temperature traces
A free dataset of the temperatures an ordinary parcel meets between sender and doorstep, by route and season. Small loggers ride in plain boxes through the normal parcel networks. The raw traces, and the summer and winter profiles drawn from them, are published for anyone to design or test a box against.
The briefCredit · unclaimed02
Paper liners tested in public
An independent bench comparison of paper-based and compostable parcel liners against EPS coolers of the same size, with the same dummy load and gel packs, under one stated temperature cycle, and with every trace published.
The briefCredit · unclaimed
Open 01 · the brief
Open parcel temperature traces
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free dataset of the temperatures an ordinary parcel meets between sender and doorstep, by route and season. Small loggers ride in plain boxes through the normal parcel networks. The raw traces, and the summer and winter profiles drawn from them, are published for anyone to design or test a box against.
Why it is still open
ISTA's 7E profiles were built from measured parcel journeys, but its public overview says the full procedure is sold through the ISTA store and that lane-by-lane profiles are available by contacting ISTA. Studies of mailed medicines report summaries, not traces: one sent 36 logged packages by three US carriers in 2019 and 2020 and found them outside the range of 68 to 77 °F for 68.3% of their time in transit. Europe's FRISBEE project put more than 14,000 temperature traces in a public database, but they follow chilled and frozen food through refrigerated stages, not parcels in the ordinary mail. The nearest open data found was a set of six truck shipments of strawberries, logged on pallets.
Built with what exists
Low-cost USB temperature data loggers such as Lascar's EL-USB-1, which stores over 16,000 readings; prepaid return labels; volunteers at each end; Python notebooks; a public archive such as Zenodo.
First step
Mail ten loggers on five round trips and publish the traces.
Done looks like
500 logged journeys over 25 pairs of origin and destination, half in summer and half in winter, published as raw files under an open license with the code that turns them into 24, 48 and 72-hour profiles. A second group reruns the code and gets the same profiles.
Open 02 · the brief
Paper liners tested in public
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent bench comparison of paper-based and compostable parcel liners against EPS coolers of the same size, with the same dummy load and gel packs, under one stated temperature cycle, and with every trace published.
Why it is still open
Buyers have the makers' figures: TemperPack sells shippers qualified for 36 or 48 hours, and Aeropowder states 53 and 96 hours. Thermo Fisher published a note comparing its own paper cooler with its EPS coolers that gives "representative data" and not the full report. The one independent test found is by the consultancy Modality Solutions and is dated 2013 by Optum. It covered five bubble-bag, liner and EPS systems used by specialty pharmacies, and none held the specified temperature through the first 24 hours. A 2026 Virginia Tech thesis by Abid Hassan tested boxes insulated with corrugated and honeycomb paperboard and found that they warmed faster as the air's relative humidity rose from 30% to 80%, while EPS and polyurethane foam stayed relatively stable; its abstract names materials, not the products on sale.
vtechworks.lib.vt.eduqa1-assets.thermofisher.cnmodality-solutions.comoptum.com
Built with what exists
A used laboratory incubator, or a home-built heated and cooled chamber; type K thermocouples and a multi-channel logger; water bottles as a dummy load; store-bought gel packs; a room humidifier and a humidity meter for the damp runs; the open profiles from the item above, or a fixed cycle stated in full.
First step
Buy two liners and one EPS cooler of the same size and run each once with four thermocouples.
Done looks like
Ten liners and two EPS controls, three runs each in dry air and one in damp air at a stated humidity. Published: hours until the load passes 8 °C, with raw traces and a written method that a second person repeats on two of the liners, landing within 10%.