Industries / Mining and materials
Cement and concrete
The cement and concrete industry quarries limestone and clay, burns them in kilns into clinker, grinds the clinker into cement, and mixes cement with water, sand and stone into concrete that is delivered by truck or cast into finished pieces in factories.
1824
Joseph Aspdin, a bricklayer of Leeds, was granted British patent 5022 on 21 October 1824 for "a cement or artificial stone" made by burning limestone and clay, "which I call Portland cement".
41
Milestones achieved across 7 domains.
12
To watch for: announced, not yet confirmed outside.
15
Open deliverables. Nobody has shipped them.
In one minute
Where it started
The Romans built with concrete made of lime and volcanic ash, and the Pantheon in Rome, dedicated in 128 CE, still stands under what MIT calls the world's largest unreinforced concrete dome. The modern industry began with Joseph Aspdin's 1824 patent for Portland cement in England, and in the 1840s his son William burned the mix hotter to make the clinker that all Portland cement is still ground from. The rotary kiln (1890), the ready-mix truck (1926) and prestressed precast concrete (1928) followed.
Where it stands
The world made about 3.8 billion t of cement in 2025, by US Geological Survey estimates, 1.7 billion t of it in China and 470 million t in India. Heating limestone releases carbon dioxide on its own, before any fuel is burned: these process emissions were 1.50 billion t of CO2 in 2018, about 4% as much as all fossil fuels, by Robbie Andrew's estimate. Makers are replacing clinker with limestone and calcined clay, burning waste as fuel, and since 2025 capturing CO2 at one plant in Norway, while the EU began charging importers for cement's carbon in 2026.
What is open
Much of the open work is checking numbers that are now taken on trust: kiln software savings, the CO2 kept in concrete, the CO2 captured at Brevik, and how well strength sensors and truck slump systems match standard tests. The rest is building shared data that each plant or lab now keeps to itself, such as clinker mineral tables, clay reactivity results, photos of broken test cylinders and cement mill reports. Most of it can be done at a desk, in a university lab or with a producer's permission, using free satellite images, public reports and open software.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Quarrying and raw mix
Quarrying and raw mix is the work of digging limestone, clay, shale or marl near a cement plant and proportioning, grinding and blending them into raw meal, a fine powder with the right chemistry to burn into clinker.
6 · 1 · 2
Last achievedA quarry permit refused2021
Watch forOld concrete as raw meal
2
openThe kiln
The kiln is where raw meal is heated to around 1,500 °C so that it partly melts and forms clinker, the hard grey nodules that are ground into cement, and it burns most of a cement plant's fuel.
7 · 2 · 2
Last achievedWaste as the main fuel2023
Watch forClinker from electricity alone
2
openGrinding and blending
Grinding and blending is the last step at the cement plant: clinker, the hard nodules that leave the kiln, is milled to a fine powder with a little gypsum to control setting, and is often mixed with other powders that take the place of part of the clinker.
6 · 1 · 2
Last achievedLimestone cement takes over2024
Watch forCalcined clay at plant scale
2
openReady-mix and delivery
Ready-mix is concrete weighed and mixed at a central plant to a buyer's order and carried to the site by truck, usually in a turning drum that keeps the load from setting on the way.
6 · 2 · 2
Last achievedElectric mixers in China2024
Watch forSlump read from video
2
openPrecast
Precast concrete is cast in a factory into finished pieces, such as floor slabs, wall panels, beams, poles and pipes, which are cured there and shipped to the site to be fitted.
5 · 1 · 2
Last achievedRAAC closes schools2023
Watch forA part in three hours
2
openCutting emissions
Cutting emissions is the work of lowering the carbon dioxide released in making cement, most of which comes from heating limestone, and of measuring, reporting and pricing what remains.
5 · 2 · 2
Last achievedCarbon priced at the border2026
Watch forBrevik near full capacity
2
openTesting strength
Testing strength is how makers and buyers check that cement and concrete will carry the loads they were designed for, mostly by crushing small samples made from the same batch, and more and more by measuring the concrete in place.
6 · 3 · 3
Last achievedFaked strength tests2010
Watch forSensors that skip calibration
3
open
Open in cement and concrete
3 of 15 open deliverables
Open · Quarrying and raw mix
A better mineral estimate
A public table that pairs the oxide analysis of clinkers from many plants with their measured mineral content, gathered from published papers and from plants willing to share, and a test of whether a model trained on some plants predicts the minerals at plants it has never seen better than the Bogue equations. The measured content comes from X-ray diffraction with Rietveld analysis, a method that fits the whole diffraction pattern to count each mineral, or from counting crystals under a microscope.
Built with what exists
Python with pandas and scikit-learn; the code Fayaz and colleagues released with their paper; free Rietveld software such as Profex or GSAS-II to check any raw diffraction data that authors share; a language model to pull tables out of PDF papers, with a person checking every value (see the Note "Seven more flagged").
Open · The kiln
One test for kiln control
An open-source test bench for kiln control. It holds code for a published model of a whole kiln line (preheater, precalciner, rotary kiln and cooler), a fixed set of upsets (a swing in raw-meal chemistry, a drop in fuel heating value, wet waste fuel, a feeder stall), and a scoring script. The script reports fuel per tonne of clinker, the spread of free lime (lime left unreacted, the usual check of clinker quality) and the time with carbon monoxide in the exhaust. Run at least a tuned PI controller (the standard feedback loop), a model predictive controller and one machine-learning controller through it.
Built with what exists
Python with CasADi, or OpenModelica, to solve the model's equations; do-mpc for model predictive control; Gymnasium to connect the bench to reinforcement-learning agents, with PC-Gym, an open set of chemical process-control test environments that holds no kiln, as a pattern to follow.
Open · Grinding and blending
A shared clay reactivity table
One open, versioned table of published tests of calcined clay reactivity, with fixed columns: where the clay came from, its minerals (kaolinite, illite, smectite, mica, quartz), the calcination temperature, the fineness, and the R3 result. R3 (ASTM C1897) is a standard lab test that measures the heat a powder gives off when it reacts with lime. Then test the rule proposed in 2026 by Ilda Tole and colleagues, that clays with at least 40 wt% clay minerals and less than 60% mica in the clay fraction react moderately to highly once calcined at 800 °C, on clays that were not in their study.
Built with what exists
The Tole data on Zenodo (doi 10.5281/zenodo.18406772, CC BY); the Crossref and Europe PMC APIs to find papers; a language model to pull values from paper tables, with a person checking every value (see the Note "Seven more flagged"); Python with pandas and scikit-learn.