Industries / Transport and vehicles / Shipbuilding and repair
Boat building
Boat building is the work of designing, molding, powering, fitting out and testing recreational and small commercial boats, and of repairing, refitting and in the end scrapping them.
c. 8000 BCE
A dugout canoe hollowed from one Scots pine trunk, found in 1955 during road building near Pesse in the Netherlands, is the oldest boat known, by the accounts of Guinness World Records and Live Science. Guinness dates it to between 8040 and 7510 BC and Live Science to between 8250 and 7550 BC. It is almost 3 m long and less than half a meter wide, and it is kept at the Drents Museum in Assen.
guinnessworldrecords.comlivescience.commass.cultureelerfgoed.nl
36
Milestones achieved across 6 domains.
15
To watch for: announced, not yet confirmed outside.
17
Open deliverables. Nobody has shipped them.
In one minute
Where it started
People were hollowing boats from logs by about 8000 BCE. Boats built for pleasure rather than work came to England in 1660, when the city of Amsterdam gave Charles II the yacht Mary, which Royal Museums Greenwich calls the first official royal yacht. Until the 1940s most small boats were wood, built one at a time. From then on fiberglass molded in a reusable mold, aluminum and later epoxy let boats be made in series, and outboard motors, sterndrives and pod drives changed how they are powered.
Where it stands
ICOMIA, the international council of national boating industry associations, puts the trade's economic impact at about $300 billion and the boats on the water at more than 30 million. In the United States, the largest market, NMMA counted 215,237 new boats sold at retail in 2025, 8.8 percent fewer than in 2024, and new boats were only about a fifth of all boats sold. The largest builders run moving assembly lines: Bavaria Yachts builds more than 600 yachts a year on four lines, by the magazine boote's count, and Groupe Beneteau, which calls itself a world leader, had €849 million in revenue in 2025 from 15 production sites.
What is open
Much of the work is still done by hand and judged by eye: laying glass fabric into molds, finding wet core in an old hull, telling bronze fittings from brass. Several numbers the trade relies on have no shared measure, among them how long boats last, how far electric boats really go, and why boats are recalled. Most of these jobs need scrap panels, a bench network, public records and an AI model, plus a boatyard or club willing to help.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Design
Designers decide a small boat's hull shape, structure and stability, and the sea conditions it is meant for, before any mold is built.
6 · 1 · 3
Last achievedA bonded keel lets go2014
Watch forFeadship trains hull AI
3
openHulls
Hull work is choosing the material for the hull and deck and turning it into a watertight shell: fastening planks, riveting or welding metal, laying glass fabric and resin in a mold, or printing plastic.
7 · 3 · 3
Last achievedA hull printed whole2019
Watch forA fast printed boat
3
openEngines and electrics
Engines and electrics is choosing and installing what drives the boat and powers what is aboard: the motor, its drive, the fuel or battery system, and the wires and data cables that tie them to the helm.
7 · 3 · 3
Last achievedAn electric ferry on foils2024
Watch forBoats that dock themselves
3
openOutfitting
Outfitting is fitting everything that turns a bare hull and deck into a working boat: tanks, plumbing, wiring, the fittings that pass through the hull, furniture, deck hardware and decking.
6 · 3 · 3
Last achievedA fine for teak2024
Watch forA robot cuts the openings
3
openTesting
Testing is how a design or a finished boat is shown to float, carry its rated load and meet the rules before it is sold, whether by the builder, a regulator or an independent body.
6 · 2 · 3
Last achievedMost tested boats fail2023
Watch forA phone measures roll
3
openRepair and refit
Repair and refit is hauling boats out of the water, finding and fixing damage, renewing coatings and equipment, and, at the end, taking the boat apart for disposal.
4 · 3 · 2
Last achievedOld hulls unfit for dumping2018
Watch forRecycled fibers in new hulls
2
open
Advances to build with
2 research notes

Claude Fable 5.2
Three working devices
Anthropic says its AI model Claude Fable 5.2 designed three prototype devices that worked without electrical modifications, with no outside test reported.

NVIDIA GR00T 2
Five demonstrations per task
By NVIDIA's own test, its robot model GR00T 2 averages 95% success after five demonstrations of a task, on 50 tasks picked from those it learns that way.
Open in boat building
3 of 17 open deliverables
Open · Design
Keel failures in public
an open table of every keel failure on a sailing yacht that can be found in public records since 1984, with the date, boat model and builder, year built, keel type and how it was fixed to the hull, the cause, and deaths, each row linked to its source.
Built with what exists
accident reports from the UK MAIB, the US NTSB and Coast Guard, France's BEAmer and Australia's ATSB; yachting press archives; a language model such as Claude Fable 5.2 to pull the fields out of each report (see the Note "Three working devices"); a shared spreadsheet or a GitHub repository.
Open · Hulls
Robot lays dry fabric
A robot arm setup that lays pre-cut pieces of dry glass fabric into a small female mold, such as a dinghy mold or a one-meter section of a hull, and smooths them into the corners so the stack is ready for resin infusion. No resin is used in the test.
Built with what exists
One or two low-cost robot arms and a camera; an open robot model that can be taught from a few demonstrations, such as NVIDIA GR00T 2 (see the Note "Five demonstrations per task"); stitched glass fabric cut to pattern; a secondhand dinghy mold or a plywood mold; gloves, long sleeves and a dust mask for handling glass fabric.
Open · Engines and electrics
Fault library for boat networks
a public set of recordings from a bench NMEA 2000 network with known wiring faults (a missing terminator, an extra terminator, low supply voltage, two devices claiming one address, a drop cable that is too long, a high-resistance connector), and a small program that names the fault from a recording.
Built with what exists
an NMEA 2000 starter kit (backbone cable, T-connectors, two terminators), three or four low-cost devices, a 12-volt bench supply, a USB CAN adapter or a Raspberry Pi with a CAN board, python-can, canboat and scikit-learn. The bench runs at 12 volts and never goes aboard.
Where it sits
Broader