Industries / Industrial equipment and services / Industrial services
Welding and fabrication
Welding and fabrication is the trade of cutting, bending and joining metal, mostly steel and aluminum, into parts and structures, from brackets and trailers to pressure vessels, ships and building frames.
1885
Nikolay Benardos and Stanisław Olszewski patented "Elektrogefest" in France (patent no. 171596, dated 10 October 1885), a way to weld metal with an electric arc drawn from a hand-held carbon rod, which they had shown in 1881; their US patent followed in 1887.
34
Milestones achieved across 6 domains.
9
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Benardos and Olszewski patented welding with an electric arc in 1885, and oxygen cutting torches followed from 1903. For decades rivets, not welds, held boilers, ships and bridges together; ASME, the American Society of Mechanical Engineers, adopted rules for welded boiler drums in 1931, after a test drum held more than six times its design pressure. TIG and MIG welding came out of 1940s aircraft work, plasma, laser and waterjet cutting arrived between the 1950s and the 1980s, and General Motors started a line of 28 spot-welding robots in 1970.
Where it stands
The US Bureau of Labor Statistics counted 437,700 jobs for welders, cutters, solderers and brazers in 2025. The International Agency for Research on Cancer, which classed welding fume as a cause of lung cancer in 2017, estimates that 11 million people worldwide have the job title of welder. Lincoln Electric, which calls itself the world's largest maker of arc welding products, reported net sales of US$4.23 billion for 2025; ESAB reported US$2.84 billion and, by its own estimate, expects its addressable market to reach about US$45 billion by the end of 2028. Fiber lasers have outsold CO2 lasers for cutting since 2015, and collaborative robot arms now weld in small job shops.
What is open
Many checks in the trade are still made by eye or by hand: grading a plasma-cut edge, reading weld symbols off a drawing, sizing a flaw in an ultrasonic scan, deciding whether a welder's papers cover a job. Robots that plan their own welds and lasers held like torches are spreading faster than any public test of them. Phone scanners, cheap sensors, open vision models and collaborative robot arms now let a small team build those tests and publish the results.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Cutting
Cutting turns plate, sheet, pipe and beams into parts of the right size and shape, with a gas flame, an electric arc, a laser beam or a jet of water.
6 · 2 · 2
Last achievedFiber lasers outsell CO22015
Watch forCut edges tuned by AI
2
openForming and fitting
Forming bends, rolls and punches cut parts into shape; fitting sets the parts in their drawn positions and holds them with clamps or small tack welds so they can be welded.
5 · 1 · 2
Last achievedThe brake corrects springback1983
Watch forRobot bending without teaching
2
openManual welding
Manual welding is joining metal by hand with heat, from a gas flame or an electric arc, with the welder guiding a rod, torch or wire gun along the joint.
7 · 1 · 2
Last achievedEU law covers welding fume2026
Watch forHandheld lasers in code work
2
openRobot welding
Robot welding is welding done by machines that move the electrodes or the torch themselves, from fixed welding machines to robot arms that find the joint with a camera.
6 · 2 · 2
Last achievedCobots weld in small shops2025
Watch forCells that plan their welds
2
openWeld inspection
Weld inspection is checking finished welds, by eye and with magnetic powder, X-rays and ultrasound, against the limits a code sets for flaws.
6 · 2 · 2
Last achievedPhased arrays, blind-tested2009
Watch forUltrasound watches welds form
2
openTraining and qualifying welders
Training and qualifying is teaching people to weld and proving by test that a welder, a welding procedure or a welded design can be trusted with real work.
4 · 1 · 2
Last achievedSimulators earn certificates2011
Watch forLive guidance in the helmet
2
open
Narrower industries
Module and pipe fabrication
Advances to build with
1 research note
Open in welding and fabrication
3 of 12 open deliverables
Open · Cutting
Plasma edges graded by photo
A public set of plasma-cut and flame-cut edges on steel plate 6 to 50 mm thick, each photographed with a phone and measured for the two qualities that, according to the KIT and Trumpf researchers below, define a cut edge under ISO 9013: roughness and perpendicularity (how far the edge leans from square). Add a dross score and a model that grades a new edge from its photos.
Built with what exists
A phone with a clip-on macro lens and a ring light; a contact roughness tester or a hired optical profilometer; an engineer's square and feeler gauges for perpendicularity; Label Studio for labels; a convolutional network trained the way the KIT paper describes; Google's Gemini Decision 1, which returns a probability for each answer on a fixed list instead of writing text, to place each edge in an ISO 9013 range (see the Note "A thousand questions, one pass").
Open · Forming and fitting
Fit-up checked against CAD
A phone or tablet app that scans a tacked-up weldment before it is welded, matches the scan to the CAD model and flags any part that is missing, out of place by more than a set distance, or turned the wrong way, so the fitter can fix it before welding.
Built with what exists
A handheld structured-light 3D scanner such as a Revopoint or Creality model, or photogrammetry from phone photos; the weldment's STEP file; Open3D to register the scan to the CAD model and measure each part's offset; a welding school or fabrication shop that supplies tacked test pieces.
Open · Manual welding
Fume sensor inside the helmet
A small logger clipped inside a welding helmet, near the mouth, that records particle readings every second while the welder works, and a public data set that pairs its readings with filter samples worn beside it during stick, MIG, flux-cored and TIG welding at a welding school.
Built with what exists
A Sensirion SPS30 or Plantower PMS5003 particle sensor; an ESP32 microcontroller logging to a memory card; a 3D-printed mount behind the lens; rented personal sampling pumps with 37 mm filter cassettes, weighed by an accredited industrial hygiene lab; Python for calibration.
Where it sits
Broader
