Industries / Industrial equipment and services / Industrial services
Welding and repair
Welding and repair is the work of fixing damaged equipment in place: welding cracks and thin spots, fitting clamps and composite wraps, and deciding whether a damaged part can keep running.
4
Milestones achieved, from 1904 to 2006.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
In depth
The same ground is charted in more depth, as an industry of its own.
The road
AchievedWatch forOpen
Achieved
1904
A coated welding rod
In a rented workshop in Gothenburg, Sweden, Oscar Kjellberg made what ESAB, the company he founded, calls the world's first coated electrode, a welding rod with a covering that protects the molten metal. He had set out to improve ship building and repair.
Credit
Oscar Kjellberg, ESAB
1974
A temporary pipe fails
At Flixborough, England, Reactor 5 of a chemical plant was removed after cracks were found leaking cyclohexane. A 20-inch bypass pipe, with flexible bellows at each end and resting on scaffolding, was built to join the reactors either side without input from a competent engineer; the site's only mechanical engineer had left five months before. The explosion that followed in 1974 killed 28 employees and injured 36.
LessonA repair that changes the plant is a design change and needs an engineer.
Credit
the 1974 Court of Inquiry, which concluded that "any modification to a plant should be designed, constructed, tested and maintained to the same standard as the original plant."
2000
Fit for continued service
The American Petroleum Institute published API 579, rules for fitness-for-service assessment, which decides whether in-service equipment with damage such as corrosion or cracks is fit to keep running. It grew from a joint industry project that the Materials Properties Council began around 1992 with 45 companies.
Credit
Martin Prager and the Materials Properties Council; American Petroleum Institute
2006
Rules for composite wraps
The first editions of ASME PCC-2 Article 4.1 and ISO 24817, standards for repairing damaged pipework with composite wraps (layers of fiber and resin bonded around the pipe), were published together in 2006. ASME's Post Construction Committee in the US and ESR Technology in the UK had identified the need in 2002.
Credit
ASME Post Construction Committee, ESR Technology and ISO
Watch for
AI reads weld radiographs
An article on Saudi Aramco's Zuluf Offshore Water Injection Project describes an automated defect recognition system, software that finds flaws in weld X-ray images and checks them against code limits. In a trial on 500 weld images also read by a Level III inspector and a certified Level II interpreter, it reports a 97% detection rate for porosity and above 90% for lack of fusion, lack of penetration and slag, and 90 to 95% accuracy against 85 to 90% for manual reading.
Achieved whenan outside body repeats the comparison on images it chooses, or a code body accepts the system's calls in place of a qualified interpreter's.
Claimed by
the project's account published by OnestopNDT, November 2025; the article names no author
Robots wrap old pipelines
Cygnet Texkimp and the University of Manchester built a robotic winding machine that Total Containment Inc. (TCI) is using to wrap existing oil and gas pipelines in Canada in carbon fiber. A research-scale machine was delivered in February 2025 and a full-scale one, which opens to fit around a pipe in its trench, is being built.
Achieved whenTCI publishes field results from wrapped lines, checked by a regulator or an outside inspector.
Claimed by
Cygnet Texkimp and TCI, December 2025
Open
01
A public weld film test
A public set of at least 1,000 weld radiographs, each read separately by two certified interpreters against a stated acceptance code, released so that any automated reader can be scored on the same images.
The briefCredit · unclaimed02
From scan to clamp
Software that takes a 3D scan of a leaking pipe fitting and produces, without hand drafting, a design for a bolted enclosure clamp, the two-piece box fitted around a leak, ready for an engineer to check and a shop to make.
The briefCredit · unclaimed
Open 01 · the brief
A public weld film test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of at least 1,000 weld radiographs, each read separately by two certified interpreters against a stated acceptance code, released so that any automated reader can be scored on the same images.
Why it is still open
Claims such as the Zuluf trial rest on a project's own images, which are not public, so no one outside can repeat the comparison.
Built with what exists
Practice films donated by inspection training schools or fabrication shops, with the owners' consent; the weld images in the public GDXray database, supplied by Germany's Federal Institute for Materials Research and Testing (BAM); certified interpreters; Ultralytics YOLO object detection models as a baseline, the same family the Zuluf system used.
First step
Ask three inspection training schools for their practice film sets and permission to publish them.
Done looks like
1,000 images with both readers' calls released, the readers' agreement rate published, and at least two automated readers scored, with misses of rejectable flaws counted.
Open 02 · the brief
From scan to clamp
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Software that takes a 3D scan of a leaking pipe fitting and produces, without hand drafting, a design for a bolted enclosure clamp, the two-piece box fitted around a leak, ready for an engineer to check and a shop to make.
Why it is still open
Repair contractors now scan a leaking fitting in minutes and have a 3D model within an hour, but the clamp is still designed by hand. One contractor exports its scans to SOLIDWORKS, "where custom repair devices are designed", and still measures simple shapes by hand.
Built with what exists
A handheld 3D scanner such as Artec Leo, or a phone with a lidar sensor; CadQuery, an open-source tool that builds CAD models from code; a coding agent that checks its own work, such as Inkling 2 Small (Notes: "Checked without being asked"); a desktop 3D printer for test shells.
First step
Scan five elbows and tees bought from a plumbing supplier and write code that fits a two-half shell around each scan.
Done looks like
Twenty different fittings (elbows, tees, flanged joints) scanned, a clamp design produced for each in under an hour with no manual CAD, printed test shells that fit with no gap over 1 mm by feeler gauge, and an engineer's written review of every design.