Industries / Industrial equipment and services / Industrial services / Welding and fabrication
Training and qualifying welders
Training and qualifying is teaching people to weld and proving by test that a welder, a welding procedure or a welded design can be trusted with real work.
4
Milestones achieved, from 1930 to 2011.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1930
A welded drum earns trust
Boiler drums, the large steel cylinders that hold water and steam under pressure, were riveted until welds were shown to be safe. On 2 May 1930 Combustion Engineering in Chattanooga, Tennessee tested a fusion-welded drum to destruction; it deformed only at 3,250 psi, against a safe working pressure of 517 psi estimated from the calculations proposed for the code. Papers by A. J. Moses presented to the National Board of Boiler and Pressure Vessel Inspectors in June 1930 contributed to a new ASME code for welded boiler drums, adopted in June 1931, and on 22 June 1931 Combustion Engineering shipped a drum believed to be the first built to the code's weld rules. The American Society of Mechanical Engineers (ASME) names the test drum a historic landmark.
LessonWelding replaced rivets in pressure work only after a full-scale test showed a margin far above the design load.
Credit
Combustion Engineering; A. J. Moses
1941
Welder tests get one book
A welder qualification test proves that a person can make a sound weld of a stated kind; a procedure qualification proves the recipe itself. ASME's chronology says its boiler code's Section IX, Welding Qualifications, was first issued in 1937 as a supplement to Section VIII, the rules for pressure vessels, and was published as a separate book from its 1941 edition. A welding consultancy's account of that edition says it gathered rules that each section of the code had written for itself into 47 pages covering stick, gas and carbon arc welding, with test positions for groove welds (1G, 2G and so on) and fillet welds (1F, 2F) that are still used, and that rules for qualifying welders were separated from those for qualifying procedures in 1952.
Credit
ASME Boiler and Pressure Vessel Committee
1997
One diploma across borders
A welder's national certificate used to count only in the country that issued it. In the late 1980s the European Welding Federation (EWF) set out to create shared qualifications as welders moved across Europe, and under an agreement first signed on 19 July 1997 at the International Institute of Welding (IIW) meeting in San Francisco, the IIW International Welder diploma became equivalent to the European Welder diploma. Its fillet, plate and tube welder levels combine training with the ISO 9606 welder tests. TWI reported in 2005 that more than 100,000 EWF and IIW diplomas of all kinds had been awarded.
Credit
European Welding Federation and International Institute of Welding
2011
Simulators earn certificates
A welding simulator lets a student practice with a mock torch on a screen, with no arc, metal or gas. Researchers led by Richard Stone at Iowa State University assigned trainees at random to two-week courses taught by AWS-certified welding instructors, one traditional and one that mixed practice on a virtual reality simulator into the course. In the journal Human Factors they reported that the virtual reality group did as well as or better than the traditional group and earned 41.6% more welding certifications.
Credit
Richard Stone, Kristopher Watts, Peihan Zhong and Chen-Shuang Wei, Iowa State University
Watch for
Live guidance in the helmet
WeldAR is an augmented reality system built into a welding helmet, with a torch attachment, that shows real-time guidance on four measures, including travel speed and work angle, while a student welds on real metal. In a study of 24 novices, each tried both WeldAR and video instruction, and the authors report that WeldAR improved performance both in assisted practice and in unassisted tests afterwards, mainly in travel speed and work angle.
Achieved whena group outside Carnegie Mellon repeats the result, or a school reports certification pass rates for students trained with the system against a comparison group.
Claimed by
Chuhan Xu, Lia Sparingga Purnamasari, Zhenfang Chen, Daragh Byrne and Dina El-Zanfaly, Carnegie Mellon University, March 2026 (accepted to the CHI 2026 conference)
Open
01
Checking a welder's papers
A program that reads a scanned welder qualification record and a welding procedure specification (WPS), the written recipe for a weld, and says whether that welder is qualified to make that weld, naming the code clause behind each decision; and a public test set of 300 such pairs, with answers agreed by two certified welding inspectors, that cites clause numbers without reproducing code text.
The briefCredit · unclaimed02
Hours or weeks with lasers
A controlled measurement of how long beginners take to learn handheld laser welding compared with TIG welding. Students with no welding experience are assigned at random to one process, practice butt joints in 2 mm stainless steel, and are tested at set intervals until a plate passes a visual inspection and a bend test.
The briefCredit · unclaimed
Open 01 · the brief
Checking a welder's papers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A program that reads a scanned welder qualification record and a welding procedure specification (WPS), the written recipe for a weld, and says whether that welder is qualified to make that weld, naming the code clause behind each decision; and a public test set of 300 such pairs, with answers agreed by two certified welding inspectors, that cites clause numbers without reproducing code text.
Why it is still open
A welder's test covers only stated positions, thicknesses, diameters and processes, and checking a record against a job is detailed paperwork. Commercial software applies the code rules to records typed into it: TWI's Welding Qualifier holds the rules of ASME IX, ISO 9606 and ISO 15614 and AWS D1.1 and tracks continuity records, and Kemppi's WeldEye manages welders' certificates and WPSs and works out "approval ranges" for EN ISO standards automatically. Neither maker's page describes reading scanned certificates. Hobby projects on GitHub check a WPS's own settings against an educational rule set (wps-compliance-checker, May 2026) or a procedure qualification packet's fields against a plant's schema (an agent template, September 2026), not a welder's range against a job. A 2025 study of multimodal AI models in welding judged photos of welds, not paperwork. Searches in November 2026 found no public test set for this task.
Built with what exists
A multimodal model that reads scanned pages as images, as in the Claude-based record reviewer described in the Note "Seven more flagged"; Google's Gemini Decision 1, which returns a probability for a yes-or-no answer instead of writing text (see the Note "A thousand questions, one pass"); redacted test records from a welding school or shop; Label Studio for the answer key.
First step
Ask a welding school for 30 old test records with names removed, write a WPS for each of five common jobs, and have one inspector mark which records cover which jobs.
Done looks like
300 record-and-WPS pairs released with both inspectors' answers and their agreement rate; the program's accuracy against the agreed answers published, with every case where it called an unqualified welder qualified listed, and that rate below 1 in 100.
Open 02 · the brief
Hours or weeks with lasers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A controlled measurement of how long beginners take to learn handheld laser welding compared with TIG welding. Students with no welding experience are assigned at random to one process, practice butt joints in 2 mm stainless steel, and are tested at set intervals until a plate passes a visual inspection and a bend test.
Why it is still open
The claims come from makers. Andrew Pfaller of Miller Electric wrote in AWS's Welding Digest that "beginner welders can get up and running in hours vs. weeks", and the Chinese maker XT Laser says that on 2 mm stainless a beginner with its handheld laser can weld "up to six times faster than a skilled TIG welder", citing its own Jinan test center with no sample size or method. Searches in November 2026 found no independent measurement of training time or test results.
Built with what exists
Handheld laser welders and TIG machines at a welding school with a laser safety officer and a laser-safe booth; bend tests in the style of AWS B2.1, run by the school; practice-time logs; a study plan registered in advance on the Open Science Framework (OSF).
First step
Ask a welding school that owns a handheld laser welder to log the practice hours of three new students on each process for one week.
Done looks like
At least 40 beginners, 20 per process, assigned at random; the median practice hours to a first passing plate for each process, with confidence intervals, and the welding speeds reached, published with the anonymized data.