Industries / Industrial equipment and services / IoT and industrial automation / SCADA integration
Control room screens
Control room screens are the software and displays from which operators watch distant wells, pumps, valves and substations and send them commands.
4
Milestones achieved, from 2000 to 2019.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2000
A standard for control centres
ISO 11064-1, the first part of an international standard on the ergonomic design of control centres, was published in December 2000. It sets out a design process in five phases: clarifying the goals, analysing the operators' tasks, conceptual design, detailed design, and feedback from operation. The aim is that a control room's layout, desks and displays follow from the work done in it, not the other way round.
Credit
International Organization for Standardization (ISO)
2010
SCADA sold by the server
Inductive Automation, founded in 2003 by Steve and Wendi-Lynn Hechtman in Folsom, California, released its Ignition software in 2010. Ignition is licensed one server at a time, with no charge for added tags (named data points), users or devices; in 2019 the company added Perspective, screens for phones and browsers. A California city's bid notice of 26 March 2024 required its new wastewater SCADA, about 14,500 inputs and outputs including 18 lift stations, to be built in Ignition.
inductiveautomation.cominductiveautomation.combidnetdirect.com
Credit
Inductive Automation
2018
Watching without the controls
On 13 September 2018 gas at far too high a pressure entered Columbia Gas's low-pressure network in the Merrimack Valley, Massachusetts, after a main replacement left the regulators' pressure-sensing lines on an abandoned pipe. Fires and explosions killed one person and damaged 131 structures. The company's monitoring centre in Columbus, Ohio, received its first high-pressure alarm at 4:04 p.m., but its SCADA system could only monitor pressures, not control the network, so controllers phoned technicians, who went out to the 14 regulator stations; at 4:30 p.m. one of them cut and isolated the flow at the Winthrop Avenue station by hand. Afterwards NiSource, the parent company, said it was fitting automatic pressure control and remote monitoring to every low-pressure system it runs, the NTSB reported.
LessonA screen that shows a problem but offers no way to act on it leaves the response to whoever can get there.
Credit
Columbia Gas of Massachusetts and NiSource (operator); NTSB (investigation)
2019
A platform run from shore
On 14 November 2018 Norway's offshore safety regulator, now called Havtil, gave Aker BP consent to move the control room of its Ivar Aasen platform, in 110 m of water in the northern North Sea, to land, as the field's 2013 development plan had foreseen. Aker BP had built two identical control rooms, one on the platform and one in Trondheim. In January 2019 it said the platform was run from Trondheim and that it was the first company on the Norwegian shelf to run a staffed platform from shore; the rest of the offshore crew stayed.
Credit
Aker BP; Havtil (consent)
Watch for
Agents brief grid operators
Enline says its AI agent, planned by a large language model, starts and sequences the study tools in a utility's distribution and energy management software on its own, watches incoming telemetry (readings sent from the field) for anomalies, and briefs operators, who keep the final decision. It reports a 40–65% cut in operator decision time and a 70–85% acceptance rate for its recommendations, without naming the utility or saying who measured them.
Achieved whena named utility publishes results from live control room use, or an outside party measures them.
Claimed by
Enline, in Eurelectric's catalogue of members' AI cases, June 2026
Open
01
A test of reading screens
A public test set of SCADA screens with the questions an operator answers at a glance (which pumps are running, which tank is highest, which site alarmed last, which value has stopped updating), and published scores for AI models that read images.
The briefCredit · unclaimed02
A free control room trainer
An open-source trainer in which a person runs a simulated water network from SCADA screens through scripted abnormal events (a pump trip at a remote station, a main break, a tank overflowing, a radio link lost) and a scorer times each detection and response.
The briefCredit · unclaimed
Open 01 · the brief
A test of reading screens
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public test set of SCADA screens with the questions an operator answers at a glance (which pumps are running, which tank is highest, which site alarmed last, which value has stopped updating), and published scores for AI models that read images.
Why it is still open
AI assistants are being put in front of operators (see Watch for), but searches found no benchmark built on SCADA or operator screens. The nearest are MME-Industry, 1,050 questions across 21 industrial fields, IndusGCC, which tests AI agents carrying out 448 tasks in the control software of industrial equipment, and a 2025 study in which a model checked the screen of one CNC lathe against its program; none tests reading supervisory screens.
Built with what exists
FUXA, an open-source web-based SCADA and HMI program (MIT licence), to build screens; EPANET, the US Environmental Protection Agency's free pipe network model, run through its Python package WNTR, to drive the values; AI models that read images, such as Claude or Gemini.
First step
Build 20 FUXA screens for one of EPANET's example networks, write 100 questions, and score one model.
Done looks like
At least 500 screenshots in at least three styles (grey high-performance screens, older colourful screens, map overviews) with 2,000 questions whose answers two people with SCADA console experience have checked, and published accuracy for each model and question type, beside the accuracy and time of at least ten human operators on a 100-question subset.
Open 02 · the brief
A free control room trainer
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open-source trainer in which a person runs a simulated water network from SCADA screens through scripted abnormal events (a pump trip at a remote station, a main break, a tank overflowing, a radio link lost) and a scorer times each detection and response.
Why it is still open
The control room trainers on sale are commercial, such as AVEVA's Pipeline Training Simulator, which it sells to pipeline operators for control room management programmes. The closest open-source tool, DHALSIM from SUTD's Resilient Water Systems Group, iTrust and TU Delft (MIT licence), pairs an EPANET water model with emulated PLCs and a SCADA server for security research, and has no operator screens or training scenarios.
Built with what exists
DHALSIM and WNTR for the network and its controllers; FUXA for the screens; a scenario script and a log of every operator action.
First step
Run DHALSIM's example network, add one FUXA screen for its tanks and pumps, and script a pump trip.
Done looks like
Ten scenarios, each run by at least ten people, five of them with water or pipeline console experience, with time to detect and time to correct each event published, and a second round showing whether the times fall with practice.