BRENNEN

Industries / Mining and materials / Mining and quarrying / Salt and mineral extraction

Purifying

Purifying turns raw salt, potash or lithium brine into a product that meets a buyer's specification, such as table salt, fertilizer or battery-grade lithium.

5

Milestones achieved, from 1880s to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1880s

    Vacuum pans for salt

    Vacuum evaporation boils brine in closed vessels at low pressure, where it boils at a lower temperature, and in a multi-effect plant the vapor from one vessel heats the next. The UK's Salt Association says the method had been used in sugar refineries since 1812 and was first applied to salt making in North America in the 1880s. In the UK, James Hargreaves installed the first commercial multi-effect brine evaporator at Cledford, Middlewich, in 1901, and the Salt Union bought its 1905 Winsford plant from the Manistee Company of the United States, which the association calls "the then world leaders in the technology." The aim became the most salt for the least coal.

    saltassociation.co.uk

    Credit

    North American salt makers, not named in the source; James Hargreaves; the Salt Union

  2. 1922

    Iodine in table salt

    Too little iodine causes goiter, a swollen thyroid gland, and cretinism, a severe stunting of growth and mental development. In 1918 the Valais doctor Otto Bayard gave villagers in Grächen salt mixed with sodium iodide. In 1922 the surgeon Hans Eggenberger gathered 3,480 signatures and the canton of Appenzell Ausserrhoden allowed iodized salt to be sold; the Swiss Goitre Commission recommended it to all cantons in June 1922, production began that November, and by the end of the 1920s it was sold across the country. Swissinfo says Switzerland was the first country to iodize table salt and that the United States followed in 1924.

    swissinfo.ch

    Credit

    Otto Bayard; Hans Eggenberger; the Swiss Goitre Commission

  3. 1972

    Salt from membranes, not fields

    Japan's 1971 Act on Temporary Measures for the Modernization of the Salt Industry ended its coastal salt fields. By 1972 the country's salt makers had fully replaced them with electrodialysis, which uses electricity and ion-exchange membranes, thin sheets that pass the charged particles of dissolved salt, to draw salt out of sea water into a strong brine that is then boiled down. The Tokyo Foundation says Japan was the first country to supply salt made this way, and that the old salt fields soon became industrial sites.

    LessonPurer is not always what buyers want: doctors and scientists objected that the new salt held less magnesium and calcium, and other kinds of salt came back to the market after the state salt monopoly ended in 1997.

    tokyofoundation.orgjstage.jst.go.jpmlit.go.jp

    Credit

    The Japanese government; Japan's salt makers

  4. 1994

    Iodized salt worldwide

    WHO and UNICEF have promoted universal salt iodization, adding iodine to all salt people eat, since 1994, with a standard of 20 to 40 parts per million (ppm). The number of countries taking part rose from 67 in 1993 to 118 in 2020, and by 2020, 89% of households worldwide used iodized salt, as reported by Sáez-Ramírez and colleagues. Their own analysis of household surveys from 49 low- and middle-income countries, run between 2005 and 2021, found that 83.4% of households used adequately iodized salt, meaning at least 15 ppm.

    pmc.ncbi.nlm.nih.gov

    Credit

    WHO and UNICEF, with national governments and salt producers

  5. 2025

    Two refineries stop short

    Two plants in Western Australia were built to refine hard-rock lithium into battery-grade lithium hydroxide. In January 2025 IGO and its partner Tianqi Lithium stopped building the second production line at their Kwinana refinery, designed for 24,000 t a year, after Tianqi judged it uneconomic. In July 2025 IGO wrote off its whole 49% stake, and in November 2025 its managing director, Ivan Vella, said "After three years, it's just not working," with output at 46% of nameplate capacity. Fastmarkets reports that Albemarle completed the shutdown of its Kemerton lithium hydroxide plant in February 2026.

    LessonA refinery that is built still has to run to specification at a competitive cost; Vella blamed energy and labor costs and spare capacity in China, and Fastmarkets notes that output from new plants during ramp-up "may not consistently meet battery-grade specifications.".

    australianminingreview.com.aukitco.comfastmarkets.com

    Credit

    IGO and Tianqi Lithium (Kwinana); Albemarle (Kemerton)

Watch for

  1. Tesla's acid-free refinery

    Tesla says its lithium refinery at Robstown, near Corpus Christi, Texas, is "fully operational." It turns spodumene, a lithium-bearing rock, into battery-grade lithium hydroxide through an alkaline leach and further purification steps, which Tesla calls the "first industrial deployment of an acid-free lithium refining route." No output figures were given.

    Achieved whena customer, regulator or auditor outside Tesla reports the plant's output and confirms that it meets battery grade.

    spectrumlocalnews.com

    Claimed by

    Tesla, through an X post by Elon Musk and a video by site manager Jason Bevan, January 2026

  2. Battery grade in Germany

    AMG Lithium says its Bitterfeld plant, which upgrades technical-grade lithium hydroxide to battery grade, is producing "in specification" product. It sent kilogram samples to every cathode maker with plants in Europe at the end of 2025, and expected tonne-scale qualification shipments in the first half of 2026 and full capacity in the second half.

    Achieved whena cathode maker confirms that the product has passed its qualification and buys it by the tonne under contract.

    news.metal.com

    Claimed by

    AMG, February 2026

Open

  1. 01

    Refinery output against nameplate

    A free public table of lithium chemical refineries, starting with those outside China, that lists each plant's nameplate capacity, its reported output each quarter, output as a share of nameplate, and whether the product met battery grade, with every figure linked to the company report it came from.

    The brief
    Credit · unclaimed
  2. 02

    An open refinery model, checked

    An open, documented mass and energy balance (a stream-by-stream account of every tonne and kilowatt in and out) for refining spodumene to lithium hydroxide, whose results are compared with the balances in published project studies.

    The brief
    Credit · unclaimed

Open 01 · the brief

Refinery output against nameplate

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free public table of lithium chemical refineries, starting with those outside China, that lists each plant's nameplate capacity, its reported output each quarter, output as a share of nameplate, and whether the product met battery grade, with every figure linked to the company report it came from.

Why it is still open

Fastmarkets reports lithium hydroxide output outside China only as a total (about 23,000 t in 2021 and 105,600 t in 2025, by its research), while plant figures sit in separate company reports, such as the 46% of nameplate IGO reported at Kwinana. A search for this brief found no free plant-by-plant table; the market trackers found are paid or cover China only.

fastmarkets.comaustralianminingreview.com.au

Built with what exists

Company quarterly and annual reports from the Australian Securities Exchange, SEC EDGAR and company websites; a large language model such as Claude to pull figures out of PDF reports, with a person checking each one (see the Note "Seven more flagged"); a spreadsheet and a public GitHub repository of CSV files.

  1. First step

    List the refineries outside China that publish quarterly output, and key the last four quarters for three of them, starting with Kwinana.

  2. Done looks like

    At least 15 refineries with 8 quarters each, every value linked to its page in a source report, plants that publish no output marked as such, and two people agreeing on at least 95% of 50 values picked at random for a spot check.

Open 02 · the brief

An open refinery model, checked

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, documented mass and energy balance (a stream-by-stream account of every tonne and kilowatt in and out) for refining spodumene to lithium hydroxide, whose results are compared with the balances in published project studies.

Why it is still open

The one open model of this process found on GitHub for this brief describes itself as "an educational, portfolio-scale model" whose unit efficiencies are "documented engineering approximations, not a certified plant design." It is not compared with any plant or study.

github.com

Built with what exists

Python; DWSIM, a free open-source chemical process simulator; PHREEQC, the US Geological Survey's free program for water chemistry; public technical reports for lithium refinery projects, filed under Canada's NI 43-101 rule or Australia's JORC Code.

  1. First step

    Download one public technical report for a spodumene-to-hydroxide refinery and copy its process flow and mass balance tables into a spreadsheet.

  2. Done looks like

    One open model that reproduces the lithium recovery, reagent use per tonne and energy use per tonne of three published refinery studies, each within 5%, with code and inputs public.