BRENNEN

Industries / Mining and materials / Mining and quarrying / Salt and mineral extraction

Evaporation ponds

Evaporation ponds are shallow basins where sun and wind dry out sea water or brine until salt, potash or a lithium-rich concentrate is left behind.

5

Milestones achieved, from 404 BCE to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 404 BCE

    Salt pans by the Tiber

    Livy, writing about events of 404 BCE, mentions Roman salt pans (salinae Romanae) in the marshes near Ostia, at the mouth of the Tiber. Excavations early this century in that area found narrow channels and an earthen barrier more than 1 km long, reinforced with more than 1,400 amphorae (clay jars) and built in the first half of the first century CE. In the early fifth century CE the poet Rutilius Namatianus described pans near Volterra that were flooded with sea water through channels, then shut off by sluices in high summer so the sun could dry the water into salt.

    ostia-antica.org

    Credit

    Roman salt workers, described by Livy and Rutilius Namatianus

  2. 1931

    Potash from the Dead Sea

    After about ten years of seeking a concession from the British authorities, Moshe Novomeysky's Palestine Potash Company built its first plant on the northwestern shore of the Dead Sea in 1931 and a second near Sodom in 1937, by one encyclopedia's account. The works take minerals from Dead Sea water by solar evaporation in a chain of ponds, by the description of today's operator, ICL. By 2000 its successor, Dead Sea Works, produced almost 10% of the world's potash.

    encyclopedia.com2021.icl-group-sustainability.com

    Credit

    Moshe Novomeysky; Palestine Potash Company

  3. 1966

    Lithium from desert ponds

    Lithium brine at Clayton Valley, Nevada, went into production in 1966; the US Geological Survey says the earliest lithium from brine came in 1938, as a by-product at Searles Lake, California. At Clayton Valley, brine with about 160 ppm lithium (parts per million) is pumped into a chain of nine ponds covering 16 km². Each pond holds the brine for weeks or months while other salts crystallize out, and it takes nearly two years to reach a concentrate of 5,000 ppm lithium. Albemarle, which runs the site at Silver Peak, calls it the only active lithium resource in the United States.

    pubs.usgs.govalbemarle.com

    Credit

    The Silver Peak operation, now run by Albemarle

  4. 1984

    Lithium from the Atacama

    At Albemarle's Salar de Atacama operation in Chile, brine pumped from under the salt flat holds close to 0.2% lithium, and open-air ponds in the desert sun concentrate it to 6% before trucks carry it to a chemical plant at La Negra, near Antofagasta. La Negra made its first lithium carbonate in 1984, the first plant of its kind in Chile, by Albemarle's account. The US Geological Survey calls the Salar de Atacama the world's most significant lithium district, with brine averaging 1,400 ppm lithium against 160 ppm at Clayton Valley.

    albemarle.comalbemarle.compubs.usgs.gov

    Credit

    The operation now run by Albemarle

  5. 2020

    Dredging a rising pond

    In Pond 5 at the south end of the Dead Sea, about 80 km² in area, about 20 million t of salt settle each year, a layer about 20 cm thick. Production needs a fixed volume of brine, so the water level rose each year with the floor, toward the foundations of hotels on the western shore, and dikes were only a temporary fix. Under a 2012 agreement with the Israeli government, ICL is to dredge the salt and move it to the northern basin. The first purpose-built dredger, 141 m long, began work in November 2020 and removes about 8 million t a year, by ICL's figures.

    LessonA pond that keeps a fixed volume of brine rises as salt builds up on its floor, so the salt has to leave as fast as it settles.

    2021.icl-group-sustainability.comjpost.com

    Credit

    ICL Dead Sea; the Israeli government; Holland Shallow Seas Dredging (contractor)

Watch for

  1. Atacama beyond solar ponds

    Novandino Litio, the Codelco and SQM partnership, filed an environmental impact study in July 2026 for Salar Futuro, its plan for the Salar de Atacama from 2031 to 2060. It says mechanical evaporation, membrane separation, reinjection of treated brine and selective lithium extraction will move production step by step away from solar evaporation ponds, raise lithium recovery, shorten processing time and end the use of fresh water from the surrounding basin. The partners put the investment at about US$3 billion.

    Achieved whenChile's environmental authority approves the project and the new plant runs, with lithium recovery and fresh-water use reported by a regulator or an independent party.

    emol.comreporteminero.cl

    Claimed by

    Novandino Litio (Codelco and SQM), July 2026

Open

  1. 01

    Pond area to output, everywhere

    Maps of evaporation-pond area, made every quarter from satellite images, for at least eight brine-pond operations (for example the two Salar de Atacama operations, Hombre Muerto, Olaroz, Cauchari-Olaroz, Clayton Valley, the Dead Sea works and Qarhan in China), each turned into a forecast of the next year's output and published before the company reports.

    The brief
    Credit · unclaimed
  2. 02

    What is in each pond

    A map of which salt is crystallizing in each pond of a lithium pond chain, made from hyperspectral satellite images (images that record hundreds of narrow color bands, enough to tell many minerals apart). Albemarle lists the salts that drop out along its Atacama chain as halite, sylvinite, potassium carnallite, bischofite and lithium carnallite.

    The brief
    Credit · unclaimed

Open 01 · the brief

Pond area to output, everywhere

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Maps of evaporation-pond area, made every quarter from satellite images, for at least eight brine-pond operations (for example the two Salar de Atacama operations, Hombre Muerto, Olaroz, Cauchari-Olaroz, Clayton Valley, the Dead Sea works and Qarhan in China), each turned into a forecast of the next year's output and published before the company reports.

Why it is still open

A 2025 study showed that pond area tracks lithium production capacity at the Salar de Atacama (R² of 0.91), but it covered that one salt flat, used images from 1985 to 2019, and relied partly on drawing pond outlines by eye.

api.crossref.org

Built with what exists

Free Sentinel-2 and Landsat images through Google Earth Engine or the Copernicus Browser; an image-segmentation model such as Meta's Segment Anything to outline ponds; production figures from company annual reports; a dated public archive such as Zenodo to lodge forecasts before results come out.

  1. First step

    Outline the ponds at two operations for four quarters and compare the area to each company's reported output.

  2. Done looks like

    Forecasts for at least eight operations lodged before one full reporting year, then scored against reported output, with the median error published.

Open 02 · the brief

What is in each pond

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A map of which salt is crystallizing in each pond of a lithium pond chain, made from hyperspectral satellite images (images that record hundreds of narrow color bands, enough to tell many minerals apart). Albemarle lists the salts that drop out along its Atacama chain as halite, sylvinite, potassium carnallite, bischofite and lithium carnallite.

Why it is still open

Published satellite work on the Atacama ponds measures pond area, not what each pond holds, and searches for this brief found no pond-by-pond map of salt stages.

albemarle.com

Built with what exists

Hyperspectral images from Germany's EnMAP satellite and NASA's EMIT instrument on the International Space Station; the USGS Spectral Library of reference mineral spectra; Python with scikit-learn.

  1. First step

    Find the clearest EnMAP or EMIT scenes over the Salar de Atacama and pull spectra from 20 ponds along one chain, from the brine inlet to the last pond.

  2. Done looks like

    Labels for at least 30 ponds on one salt flat, scored against site photographs or an operator's own labels with at least 80% agreement, and repeated on a second date to show brine moving down the chain.