Industries / Transport and vehicles / Automotive / RV manufacturing
Interiors
Interior work fits out the living space: the cabinets and furniture, the materials they are made of, and the appliances that keep food cold, heat the cabin and serve as the bathroom.
5
Milestones achieved, from 1956 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1956
Silent fridges go mobile
An absorption refrigerator cools with heat instead of a motor: a gas flame or an electric heating element drives a coolant around a sealed circuit with no compressor and no moving parts, so it can run silently on bottled gas where there is no mains power. Two Swedish engineering students, Baltzar von Platen and Carl Munters, invented it. Dometic dates the invention to 1922 and the patent to 1923; Munters, the company Carl Munters later founded, dates the invention to 1923. Electrolux bought the rights in 1925 and began mass production. In 1956 it began developing and making absorption refrigerators for RVs, in a leisure division it named Dometic by the end of the 1960s. Dometic says that as homes moved to compressor fridges in the 1950s, the silent absorption fridge stayed the best choice for RVs and boats.
Credit
Baltzar von Platen and Carl Munters; Electrolux (Dometic)
1961
Gas heat for caravans
Truma was founded in Munich in 1949 by Philipp Kreis to make gas lamps. It says its Truma-matic of 1961 was "the first officially recognised caravan heating system". The heater burned bottled gas, needed no mains electricity, lit with a piezo spark, and had an enclosed burner and a thermoelectric safety device, the kind that shuts off the gas if the flame goes out. Truma says its later Trumatic C heater for motorhomes sold more than 500,000 units before the Combi, a lighter heater with a built-in hot water tank, replaced it in 2007.
Credit
Philipp Kreis, Truma
2010
RVs written into law
Formaldehyde is an irritant gas given off by the glues in some wood panels. In a sample of occupied FEMA trailers drawn in November 2007, the CDC measured a geometric mean (a typical value for skewed data) of 81 parts per billion in 360 travel trailers. The US Formaldehyde Standards for Composite Wood Products Act, signed on 7 July 2010, set emission limits for hardwood plywood, particleboard and medium-density fiberboard. It exempts the composite wood inside new cars, rail cars, boats and aircraft, but its wording leaves recreational vehicles out of that exemption, so RV interiors are covered. EPA published the national rule on 12 December 2016, matched to the limits of California's rule. Since 1 June 2018 the panels, and finished goods that contain them, must be labeled as compliant.
Credit
US Congress; US Environmental Protection Agency; California Air Resources Board
2010
A fridge recall's long tail
In 2010 Norcold widened earlier recalls of its 1200-series gas absorption fridges, the first of them in 2002, to every unit built up to 6 October 2010: 151,795 fridges by NHTSA's count. The thermal switches and the sensing program fitted under the earlier recalls, meant to cut the power when a fridge overheated, had proved too slow, so dealers fitted a faster-reacting thermocouple. Norcold later told a bankruptcy court that corrosion of the cooling units' boiler tubes could let gas escape and start a fire. It said it had faced more than 10,500 product claims and paid about $84 million to settle claims since 2010, and separately about $36 million to settle a class action filed in 2016.
Lessona safety cut-off that reacts too slowly is not a fix, and the claims from one faulty part outlasted the product line.
Credit
Norcold; NHTSA; Transport Canada
2025
Compressor fridges take over
A DC compressor fridge works like a kitchen fridge, with a small motor-driven compressor, but runs on the RV's 12 V battery. By Norcold's account in court, US RV makers began fitting them around 2018. When the pandemic boom outran the supply of gas absorption fridges, which came from only two makers, RV makers adopted compressor fridges faster. Norcold's revenue fell from about $153 million in 2021 to a projected $28 million or less for 2025. It closed its Ohio plants in 2022, moved its remaining absorption production to Thetford's European company in 2023, and filed for Chapter 11 bankruptcy on 3 November 2025.
Lessona shortage made RV makers and buyers comfortable with the alternative, and the market did not swing back.
Credit
RV manufacturers; Norcold
Watch for
Quieter roof heat pumps
MRCool says its TravelCool rooftop heat pump for RVs, launched in August 2026, runs at 55 dB (decibels) in its Eco mode, against 60 to 70 dB for conventional RV air conditioners, and can heat the inside of an RV to 27.2 °C when it is 5 °C outside. It rates the 115 V unit at 15,000 Btu/h (about 4.4 kW) of cooling and 10,236 Btu/h (about 3.0 kW) of heating.
Achieved whenan independent lab or reviewer measures the noise and the heating output of an installed unit at 5 °C outdoors.
Claimed by
MRCool, August 2026, as reported by pv magazine
Open
01
Air in new RVs, measured
A public dataset of formaldehyde and total volatile organic compounds (VOCs, the vapors given off by glues, finishes and fabrics) in new, unoccupied RVs, measured to one written protocol, with the inside temperature and humidity recorded each time.
The briefCredit · unclaimed02
The fit-out, part by part
A public mass breakdown of an RV's interior: every cabinet, panel, bed, seat, cushion, appliance, tank, pipe and fitting taken out, weighed and grouped, with what each is made of, so designers can see where the weight of a living space goes.
The briefCredit · unclaimed
Open 01 · the brief
Air in new RVs, measured
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public dataset of formaldehyde and total volatile organic compounds (VOCs, the vapors given off by glues, finishes and fabrics) in new, unoccupied RVs, measured to one written protocol, with the inside temperature and humidity recorded each time.
Why it is still open
The largest measurement of the air in RVs is still the CDC's sample of occupied FEMA trailers drawn in November 2007. Composite wood in RVs has had to meet federal emission limits since 2018, but searches of the web and GitHub in November 2026 found no published measurements of the air in new RVs.
Built with what exists
Formaldehyde sampling cartridges (tubes coated with DNPH, a chemical that traps formaldehyde) on a small pump, analyzed by an accredited lab; logging electrochemical formaldehyde monitors for hour-by-hour readings; temperature and humidity loggers; a spreadsheet or GitHub repository for the data.
First step
Write the sampling protocol and, with a dealer's permission, sample five new units on one lot.
Done looks like
50 new RVs from at least eight brands sampled in summer and in winter, each with at least one lab-analyzed cartridge, published with the model, build month, inside temperature and humidity, and compared with the CDC's 2007 figures.
Open 02 · the brief
The fit-out, part by part
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public mass breakdown of an RV's interior: every cabinet, panel, bed, seat, cushion, appliance, tank, pipe and fitting taken out, weighed and grouped, with what each is made of, so designers can see where the weight of a living space goes.
Why it is still open
Motorhomes have become heavier, and CIVD, the German caravan industry association, says "the 3.5-tonne limit is quickly reached" for an ordinary car licence. Makers publish total masses, not where the mass sits, and searches in November 2026 found owners' tallies of the weight of things they had added, but no published part-by-part breakdown of an RV's interior.
Built with what exists
A written-off travel trailer or camper van bought from a salvage auction, with its gas cylinders and batteries removed before work starts; hand tools; a calibrated platform scale reading to 0.01 kg; public weighbridge tickets for the whole vehicle before and after; a camera and a spreadsheet.
First step
Buy one written-off small travel trailer and weigh it on a public weighbridge before anything is taken out.
Done looks like
Two vehicles of different types stripped to the shell, every part over 0.2 kg listed with its mass and material, and the parts' total within 2% of the weighbridge difference between the whole vehicle and its shell, published with photos.