BRENNEN

Industries / Transport and vehicles / Automotive / RV manufacturing

Body and framing

The body is the box people live in: its walls, roof and floor, how they are framed and joined, and the rooms that slide out to widen it.

6

Milestones achieved, from 1930 to 2022.

0

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1930

    A trailer with solid walls

    In 1928 a tent trailer that its maker said opened into a cabin in five minutes defeated Arthur G. Sherman, a Detroit bacteriologist, in a thunderstorm. He had a carpenter build him a camping trailer with a solid Masonite (pressed hardboard) body, 6 ft wide and 9 ft long (about 1.8 by 2.7 m), and showed it at the Detroit Auto Show in January 1930, where he sold 118. By 1936 his Covered Wagon Company built trailers on an assembly line modeled on the car industry's and was the largest US trailer maker, selling about 6,000 that year. By the end of the 1930s the industry made more than 20,000 solid-body trailers a year, and tent trailers had more or less disappeared, by the account of Smithsonian magazine.

    smithsonianmag.com

    Credit

    Arthur G. Sherman, Covered Wagon Company

  2. 1936

    An aluminum shell

    Wally Byam founded Airstream in Los Angeles in 1931 and at first sold plywood trailers. In early 1936, inspired by the light aluminum Road Chief trailers of the engineer Hawley Bowlus, he switched to the aluminum-clad Airstream Clipper, which started at $1,200. Production stopped in World War II, when aluminum went to the war effort, and resumed in 1947. Airstream still builds its trailers of riveted aluminum, and says many are still on the road decades after they were built.

    smithsonianmag.comairstream.com

    Credit

    Wally Byam; Hawley Bowlus

  3. 1968

    A trailer in two halves

    In Winnipeg, Canada, Ray Olecko and the mold maker Sandor Dusa began building the boler, a 13 ft (about 4 m) trailer made of two molded fiberglass halves, top and bottom, bonded together. Olecko said it weighed 800 lb (about 360 kg) "because it does not have the conventional wood frame. The fibreglass acts as its own frame and skin." About 10,000 were sold between 1968 and 1988, and the boler is credited with inspiring many nearly identical trailers.

    boler.camhs.mb.ca

    Credit

    Ray Olecko, Sandor Dusa, Boler Manufacturing

  4. 1996

    Rooms slide out

    A slide-out is a section of wall, floor and roof that moves outward when the vehicle is parked, to widen a room. Rollohome of Marshfield, Wisconsin, offered "pull-out rooms", pulled out by hand from outside, on its 1952 trailers, and slide-outs became widely available in the 1990s, by the account of the trade publication RV Hotline Canada. Newmar says that in 1996 it introduced "the first power and flush-door slideouts in a Class A motorcoach" and was for three years the only Class A maker to offer them.

    LessonEach slide-out adds a moving joint that must stay watertight through years of opening and closing, and seal makers now design for that.

    rvhotlinecanada.comnewmarcorp.comjaeger-unitek.com

    Credit

    Rollohome Trailer Coach; Newmar

  5. 2009

    Walls without timber

    Bailey of Bristol, a British caravan maker, says leisure vehicle construction had changed little in over 30 years. At the NEC show in Birmingham in October 2009 it launched Alu-Tech on its Pegasus range, with no wood in the sidewalls, by Practical Caravan's account. An interlocking frame of aluminum extrusions clamps the panels together, which Bailey says cuts external joints and fixing points by 90%, and the upper panels have a plastic composite skeleton between skins of GRP (glass-reinforced plastic), to limit the harm any water that gets in can do. Practical Caravan's guide to buying a used 2010 Pegasus still warns of water entering grab handles, floor damage in corners and water getting into the rear moldings.

    LessonTaking the timber out of the walls did not stop leaks at the joints and fittings that remain.

    practicalcaravan.combaileyofbristol.co.uk

    Credit

    Bailey of Bristol

  6. 2022

    Built fast, by hand

    About 80% of US RVs are built in the Elkhart region of northern Indiana, by the Indianapolis Star's count, and largely by hand: at a Thor Motor Coach plant in Elkhart in 2016, a manager told the public broadcaster WFYI that almost all components were made by hand, with "none of the automation you see in some modern factories." In October 2022 an IndyStar investigation reported that many assembly workers are paid by the number of units they finish, a system called piece rate. It found that the rush to finish one unit and start the next leads to accidents such as falls, electrocutions and amputations, documented in lawsuits and Indiana safety orders, and workers said the pace also causes quality problems. Thor said its pay structure is fair.

    LessonPaying by the unit raises output, but workers tie the speed it rewards to injuries and defects.

    news.yahoo.comwfyi.org

    Credit

    Binghui Huang and Kristine Phillips, Indianapolis Star; WFYI

Open

  1. 01

    Slide-outs on a leak rig

    A bench rig that runs a slide-out room in and out thousands of times while a spray bar wets its seals at set intervals, and logs the cycle at which water first gets inside. Then the same test on seals from at least three suppliers.

    The brief
    Credit · unclaimed
  2. 02

    Four-season claims, measured

    A field test of RVs sold in North America as "four-season" or winter models, run outdoors on cold nights to one written method modeled on the grade 3 test of EN 1645-1, the European standard for caravan living spaces. The RV stands with doors and windows open until it is as cold as the air outside; then it is closed up, its own furnace is switched on, and loggers record how long the inside takes to rise 35 °C above the outside air and how evenly the heat spreads.

    The brief
    Credit · unclaimed

Open 01 · the brief

Slide-outs on a leak rig

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench rig that runs a slide-out room in and out thousands of times while a spray bar wets its seals at set intervals, and logs the cycle at which water first gets inside. Then the same test on seals from at least three suppliers.

Why it is still open

Seal makers publish material tests, not leak results. A white paper from the seal maker Jaeger-Unitek describes heat, cold and ultraviolet aging tests of seal polymers and its one-piece seal design, but gives no count of cycles to the first leak. Searches of the web, academic indexes and GitHub in November 2026 found no published leak test of whole slide-outs, only owners' spray tests described on forums.

jaeger-unitek.com

Built with what exists

A slide-out salvaged from an RV breaker's yard, or a plywood mock-up room running in a framed opening; the slide's own 12 V motor or a 12 V linear actuator on a bench power supply; an Arduino or Raspberry Pi to count cycles and switch a garden-hose spray bar on a timer; moisture indicator strips and a camera inside the room.

  1. First step

    Buy one slide-out seal kit and build a 1.2 m wide plywood opening and mock-up room.

  2. Done looks like

    At least three seal types each run to 5,000 cycles or to the first leak, with a spray of fixed flow (liters per minute) every 100 cycles, published with video, the rig drawings and the logs.

Open 02 · the brief

Four-season claims, measured

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A field test of RVs sold in North America as "four-season" or winter models, run outdoors on cold nights to one written method modeled on the grade 3 test of EN 1645-1, the European standard for caravan living spaces. The RV stands with doors and windows open until it is as cold as the air outside; then it is closed up, its own furnace is switched on, and loggers record how long the inside takes to rise 35 °C above the outside air and how evenly the heat spreads.

Why it is still open

There are no industry-wide criteria for what makes an RV four-season, by the account of the rental platform RVshare. In Europe the grade 3 test requires a vehicle soaked at -15 °C to reach +20 °C inside within four hours in a climate chamber, and Bailey of Bristol describes its models passing it in the chamber of Truma, the heater maker. In North America Truma certifies RVs in its own chamber: Gold for a 35 °C rise within four hours at -15 °C outside. Both tests are run by or for the makers and their heater supplier, and searches in November 2026 found no independent, published set of results for North American four-season RVs.

rvshare.combaileyofbristol.co.uktruma.com

Built with what exists

A dozen battery-powered temperature loggers placed to a fixed map, as in the chamber tests; a weather station for the outside air; a thermal camera such as a FLIR ONE to find cold spots in walls, slide-outs and floors; the RV's own furnace, run by its owner or dealer as in normal use, with no change to its gas system; a spreadsheet.

  1. First step

    Write the logger map and method from the published grade 3 and Truma criteria, and test one owner's trailer on the next cold night.

  2. Done looks like

    20 RVs from at least eight brands sold as four-season, each tested on a night below -10 °C, published with the time each took to reach a 35 °C rise, the share that did so within four hours, and thermal images of the weakest spots.