Industries / Transport and vehicles / Rail
Locomotives and cars
This is the work of designing, building and keeping in repair the vehicles: the locomotives that pull trains, the passenger and freight cars they pull, and parts such as wheels, bearings and brakes.
7
Milestones achieved, from 1879 to 2023.
2
To watch for: announced, not yet confirmed outside.
3
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1879
Power from outside the train
At the 1879 Berlin trade exhibition Siemens & Halske ran what Siemens calls "the world's first electric railway with external power source": the locomotive drew its power from a fixed supply instead of carrying its own fuel.
Credit
Werner von Siemens; Siemens & Halske
1939
A diesel beats steam
Electro-Motive's four-unit FT demonstrator, No. 103, hauled freight in 35 states over 20 large railroads from November 1939 to October 1940. The American Society of Mechanical Engineers (ASME), which named it a landmark, calls its lead unit the prototype of the first mass-produced diesel-electric freight locomotives in the United States, which "rapidly replaced the steam locomotive".
Credit
Electro-Motive Corporation of General Motors
1959
Sensors spot hot bearings
A failing axle bearing heats up, a fault railroaders call a hot box, and can let an axle break. By 1959 the Pennsylvania Railroad was installing Servo Corporation detectors near Baltimore that read the heat of each passing axle bearing with infrared sensors and sent the readings by wire to an office, by the trade journal Railway Signaling's account.
Credit
Servo Corporation of America; the Pennsylvania Railroad
1998
A wheel tire breaks
On 3 June 1998 an ICE high-speed train derailed at 200 km/h near Eschede, Germany, and brought down a road bridge, killing 101 people. The investigation found that metal fatigue in a wheel tire, the steel ring around the wheel's center, started the chain of damage.
Credit
German accident investigators, as summarized by the Deutschland Museum
2005
Listening for bad bearings
Acoustic detectors beside the track record the sound of passing bearings to find internal damage before it heats up. The Transportation Technology Center (TTCI), the AAR's research arm, added a "growler" alarm for the worst defects to its Trackside Acoustic Detection System (TADS) in October 2005, and reported in 2007 that about 1.5% of axles carried a bearing with a defect detectors could hear. Railinc, the railroads' data company, distributes the detector data.
Credit
TTCI, now MxV Rail; the AAR
2022
Hydrogen trains run short
On 24 August 2022 Lower Saxony began running a fleet of 14 Alstom Coradia iLint trains powered by hydrogen fuel cells, after two years of test service with two trains from September 2018. In August 2025 the operator, EVB, said only four of the 14 were running because replacement fuel-cell modules had not arrived, and the state expects its first large battery-electric fleet from 2029, by CleanTechnica's account.
LessonA new power source needs a steady supply of spare parts, not only a working train.
Credit
Alstom; LNVG, the state's transport authority; EVB; Linde
2023
East Palestine bearing failure
On 3 February 2023 a Norfolk Southern train derailed in East Palestine, Ohio, after a wheel bearing on a hopper car failed and overheated; 38 cars left the track, 11 of them tank cars carrying hazardous materials. The National Transportation Safety Board (NTSB) found that the difficulty of measuring the temperature inside a bearing, the railroad's procedures and the spacing between detectors left the crew without adequate warning, and that the later venting and burning of vinyl chloride "was not necessary".
LessonA detector that reads the outside of a bearing can miss how hot it is inside.
Credit
the NTSB
Watch for
Battery locomotives in the Pilbara
BHP received its first two battery-electric locomotives from Wabtec in late 2025, each with a 7 MWh battery and regenerative braking, which stores energy recovered on downhill runs. BHP says it will trial them on its iron ore lines to Port Hedland, Western Australia, to learn how they can reduce diesel use.
Achieved whenBHP or an outside party publishes measured diesel savings and availability from the trial.
Claimed by
BHP and Wabtec, February 2026
Bearings caught earlier
The AAR says that since East Palestine the railroads have installed hundreds of new hot-bearing detectors, lowered the detector reading at which a car must be set out from 200°F to 170°F in its revised Rule 36 (effective 1 July 2025), and that all six large railroads now share one alert algorithm for spotting bearings that run hotter over time.
Achieved whenThe FRA's accident data or an independent review shows fewer bearing-caused derailments since July 2025.
Claimed by
the AAR, February 2026
Open
01
Robot swaps a brake shoe
A bench rig that holds a real freight-car brake head, the part that presses the brake shoe against the wheel, at the height it sits on a car. A robot arm pulls the key that holds the shoe, removes the worn shoe, seats a new one and drives the key home. There is no car, no air pressure and no track.
The briefCredit · unclaimed02
Measured wheel defects
A public photo set of freight-car wheel treads with flat spots, worn flat when a wheel slides, and shelling, where metal flakes off the tread, each measured with a steel rule and a wheel gauge and labeled as condemnable or not under the US rule, 49 CFR 215.103. Under that rule, for example, a slid flat or shelled spot more than 2½ inches long makes a wheel defective. Add a baseline model. Photograph wheelsets at scrap dealers or in storage, away from any track in use.
The briefCredit · unclaimed03
Freight car defect benchmark
A public, labeled photo set of the freight-car parts that inspectors check, such as brake shoes, springs, coupler pins and the handholds and ladders the law calls safety appliances, with real defects, photographed on cars that are out of service at railway museums, in scrap lines or in storage, never on live track. Score detectors against a qualified car inspector's call.
The briefCredit · unclaimed
Open 01 · the brief
Robot swaps a brake shoe
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench rig that holds a real freight-car brake head, the part that presses the brake shoe against the wheel, at the height it sits on a car. A robot arm pulls the key that holds the shoe, removes the worn shoe, seats a new one and drives the key home. There is no car, no air pressure and no track.
Why it is still open
Wayside systems such as International Electronic Machines' BPMS measure shoe thickness on passing trains and report which car needs "a change-out", but the change itself is done by hand. This research found no robot, product or study that changes freight-car brake shoes.
Built with what exists
A brake head, composition brake shoes and keys from a rail parts supplier; a collaborative arm whose payload exceeds a shoe's weight, such as a Universal Robots UR10e; a color-and-depth camera; a robot model that learns from a few demonstrations, such as NVIDIA GR00T 2 (see the Note "Five demonstrations per task") or Runway Praxis-1 (see the Note "Open robot model weights"); AI agents that write robot programs a person can read (see the Note "Readable robot programs").
First step
Buy one brake head, two shoes and two keys, bolt the head to a frame at car height, and film a person doing five swaps.
Done looks like
Twenty filmed, uncut swaps with a public table recording for each one whether the key came out, the shoe seated and the key was fully driven (checked by a hand pull afterward), with the minutes taken and any human touches, plus a person doing five swaps for comparison.
Open 02 · the brief
Measured wheel defects
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public photo set of freight-car wheel treads with flat spots, worn flat when a wheel slides, and shelling, where metal flakes off the tread, each measured with a steel rule and a wheel gauge and labeled as condemnable or not under the US rule, 49 CFR 215.103. Under that rule, for example, a slid flat or shelled spot more than 2½ inches long makes a wheel defective. Add a baseline model. Photograph wheelsets at scrap dealers or in storage, away from any track in use.
Why it is still open
The public FaultSeg set (2024) labels shelling, discoloration and cracks or scratches on wheel photos, but has no flat-spot class and no measured sizes. This research found no public set tied to the condemning limits.
Built with what exists
A phone camera with fixed lighting and a scale bar; a steel rule and a wheel gauge; CVAT, an open labeling tool; an open-source segmentation model; a vision-language model to draft labels for a person to check (see the Note "Three working devices").
First step
Ask a scrap dealer that buys retired wheelsets for access, then photograph and measure 20 wheels.
Done looks like
At least 300 wheelsets and 1,000 measured defects under an open license, a second person re-measuring 10% of them, and a published table of how often the model's keep-or-condemn call matches the measured call.
Open 03 · the brief
Freight car defect benchmark
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public, labeled photo set of the freight-car parts that inspectors check, such as brake shoes, springs, coupler pins and the handholds and ladders the law calls safety appliances, with real defects, photographed on cars that are out of service at railway museums, in scrap lines or in storage, never on live track. Score detectors against a qualified car inspector's call.
Why it is still open
Norfolk Southern says its inspection portals take about 1,000 images per car and run 38 deep-learning models that showed "very high accuracy levels" in testing, but neither images nor results are public. A 2022 study of freight-train brake parts reports results on "four fault datasets" with no public download found.
Built with what exists
A phone or machine-vision camera; access to out-of-service cars with the owner's permission; CVAT; an open-source object detector; a vision-language model to draft labels and a second model that flags doubtful ones for a person to check (see the Note "Seven more flagged").
First step
Ask a railway museum for a day's access to five freight cars and photograph every brake shoe and spring.
Done looks like
At least 5,000 images from at least 100 cars, labeled by a qualified car inspector with a second inspector checking 10%, under an open license, and a published table of hit rate and false alarms for each part.