BRENNEN

Industries / Mining and materials / Pulp and paper

Chemical recovery

Chemical recovery burns black liquor, the spent cooking liquor of a kraft mill, to recover its sodium and sulfur for reuse and to raise steam and power.

5

Milestones achieved, from 1929 to 2023.

1

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1929

    The recovery boiler arrives

    A recovery boiler burns concentrated black liquor, collects the cooking chemicals as a molten salt called smelt, and uses the heat to raise steam. Babcock & Wilcox says it developed the first kraft recovery boiler with G.H. Tomlinson in 1929. The 2018 Forest Products Laboratory review names Tomlinson's recovery boiler, with Dahl's recovery cycle, as the reason kraft became the dominant process.

    babcock.comresearch.fs.usda.gov

    Credit

    G.H. Tomlinson; Babcock & Wilcox

  2. 1961

    The industry pools its incidents

    When water meets molten smelt it can explode. Alarmed by the number of damaging smelt-water incidents, several groups of professionals formed the Black Liquor Recovery Boiler Advisory Committee (BLRBAC) late in 1961, and it issued shared practices such as an emergency shutdown procedure. By BLRBAC's figures, reported in 2007, the running average of damaging smelt-water incidents fell from 6 per 100 operating years in 1973 to 4 in 1983, 2.3 in 1993 and 0.3 after 2003.

    LessonSharing incident reports across rival companies cut explosions for the whole industry.

    pulpandpapercanada.com

    Credit

    BLRBAC

  3. 2010

    Diesel from tall oil

    Crude tall oil is an oily by-product of chemical pulp mills. SunPine's plant at Piteå, Sweden, opened in 2010 and turns it into crude tall diesel, which Preem refines into a renewable diesel at Gothenburg; the fuel went on sale on 9 April 2011. IEA Bioenergy's 2023 assessment calls the plant the first facility of its kind in the world.

    ieabioenergy.com

    Credit

    SunPine and its founder Lars Stigsson; Preem

  4. 2013

    Lignin taken from black liquor

    Domtar's mill in Plymouth, North Carolina, started the first full-scale LignoBoost plant, which separates lignin out of black liquor; it made its first washed lignin cake on 15 February 2013. Taking lignin out eased the load on the recovery boiler, which had limited the mill, and by Valmet's account raised pulp capacity by 5%.

    valmet.com

    Credit

    Domtar; Valmet, the supplier

  5. 2023

    Gasification proven, never built

    Chemrec's pressurized, oxygen-blown gasifier at Piteå turned black liquor into gas instead of burning it, and ran more than 28,000 hours, over 12,000 of them making methanol and bio-DME (a diesel substitute); trucks ran 100,000 km each on the fuel. A planned EUR 350 million commercial plant at Domsjö never got a go-ahead, and the pilot is idle. IEA Bioenergy's 2023 assessment calls the project a technical success.

    LessonThe assessment says a working process still needed at least 15 years of stable policy to be financed at full scale.

    ieabioenergy.com

    Credit

    Chemrec; LTU Green Fuels; assessment by IEA Bioenergy

Watch for

  1. Capturing recovery boiler CO2

    CO280 says a test unit from SLB Capturi, rated at 3 tonnes a day, ran more than 4,000 hours on the stack gas of a recovery boiler at an unnamed US Gulf Coast pulp mill and captured a steady 95% of the CO2. Because that carbon came from trees, storing it underground counts as removing CO2 from the air, and buyers in the Frontier coalition have contracted 224,500 tonnes of removal from CO280 for US$48.0 million, for delivery in 2028 to 2030.

    Achieved whena full-scale unit injects CO2 into a permitted storage well and an outside verifier confirms the tonnes removed.

    paperage.comfrontierclimate.com

    Claimed by

    CO280, November 2025

Open

  1. 01

    A public recovery boiler incident set

    A public, structured dataset of recovery boiler incidents drawn from reports that regulators already publish. Each incident is coded for the part of the boiler involved, the cause (for example a tube leak or a smelt-water reaction), whether an emergency shutdown was used, and the outcome, with a short guide to the coding.

    The brief
    Credit · unclaimed

Open 01 · the brief

A public recovery boiler incident set

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, structured dataset of recovery boiler incidents drawn from reports that regulators already publish. Each incident is coded for the part of the boiler involved, the cause (for example a tube leak or a smelt-water reaction), whether an emergency shutdown was used, and the outcome, with a short guide to the coding.

Why it is still open

The industry's best-known figures are BLRBAC's running averages. Regulator reports, such as Technical Safety BC's investigation of a leak in the lower furnace of a recovery boiler in Prince George in 2020, sit as separate web pages and PDFs. A search found no combined, coded public set.

pulpandpapercanada.comtechnicalsafetybc.ca

Built with what exists

A language model that reads PDF reports and fills a fixed form, such as Claude (Note: "Seven more flagged" covers a similar document-review job); a spreadsheet or SQLite database; two people who check a sample by hand.

  1. First step

    Download every recovery boiler investigation from the Technical Safety BC and WorkSafeBC sites and code ten by hand to settle the form.

  2. Done looks like

    At least 100 public incident reports coded. Two people each code a random 20% on their own, and the model's coding agrees with theirs on at least 90% of fields. The dataset and coding guide are published under an open licence.