Industries / Mining and materials / Pulp and paper
Pulping
Pulping separates wood into loose fibers, either by grinding it or by cooking it in chemicals that dissolve lignin, the natural glue that holds the fibers together.
7
Milestones achieved, from 1844 to 2024.
2
To watch for: announced, not yet confirmed outside.
1
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1844
Grinding logs into pulp
Friedrich Gottlob Keller of Saxony ground wood against a grindstone turning in water and got a pulp that, mixed with rags, could be made into paper. It began the move away from rags as the main raw material. Sources disagree on the year: the Verla mill museum gives 1844 and Cepi, the European paper industry body, gives 1843.
LessonGround wood alone made weak paper, so mills still blended in longer rag fibers for strength.
Credit
Friedrich Gottlob Keller, and Heinrich Voelter, who bought the rights in 1846 and showed an industrial grinder at the 1867 Paris World's Fair
1854
Cooking wood in soda
Charles Watt and Hugh Burgess patented a process that boils wood shavings in caustic alkali to free the fibers (US patent 11,343, 18 July 1854). Cepi calls it the first patent for chemical pulp.
LessonSoda pulp made weak paper and did not work on softwoods, so the search for a better cooking chemistry went on.
Credit
Charles Watt and Hugh Burgess
1867
Sulfite cooking, then abandoned
Benjamin Tilghman found that wood exposed to sulfurous acid became fibrous and patented pulping with calcium bisulfite (US patent 70,485, 1867). He gave up because his equipment corroded and the process was hard to control, and other engineers later completed the sulfite process.
LessonA chemistry that works in the lab can still fail on the materials the plant is built from.
Credit
Benjamin Chew Tilghman
1884
Kraft cooking is patented
Carl F. Dahl of Danzig patented cooking wood in a solution of soda and sodium sulfide, topping up lost soda with cheaper sodium sulfate (US patent 296,935, 15 April 1884). Kraft became the main chemical pulping method because it recovers its chemicals, works on every wood species and makes strong paper; in US production figures cited in a 2018 review, kraft made 93.2% of chemical pulp.
Credit
Carl Ferdinand Dahl; Asahel Eaton earlier found that sulfide speeds soda cooking
2018
Solvent pulping keeps failing
Over about 50 years, processes that cook wood in methanol, ethanol, acetic acid or peroxyformic acid, called organosolv, were run at pilot scale or in commercial trials. A 2018 review from the US Forest Products Laboratory found that none had stayed in use longer than five years.
LessonEach process lived or died on how much solvent it lost in washing and recovery, and kraft's simpler recovery cycle was hard to beat.
Credit
review by Carl Houtman, USDA Forest Service, Forest Products Laboratory
2019
A straw pulp mill fails
Columbia Pulp opened a mill near Dayton, Washington, in 2019 to make pulp from wheat straw, at a build cost of about US$183.9 million. Its auctioneer describes it as set to be the first full-scale straw pulp mill in North America. It shut down less than a year after starting, restarted, idled again in February 2022, went into receivership in April 2022, and was put up for auction in February 2024.
LessonA first-of-its-kind mill met problems at full scale that it could not outlast; its interim chief executive said being "a first of its kind application with this type of technology has not been without challenges".
Credit
Columbia Pulp
2024
World's largest single pulp line
Suzano started a bleached eucalyptus kraft pulp mill at Ribas do Rio Pardo, Brazil, with a capacity of 2.55 million tonnes a year. The trade publication EUWID reports it as the world's largest single pulp production line, and says the mill will also sell about 180 MW of surplus power.
Credit
Suzano
Watch for
A 3.5 million tonne line
Arauco is building the Sucuriú eucalyptus pulp mill in Mato Grosso do Sul, Brazil, with a capacity of 3.5 million tonnes a year, a total investment of US$4.6 billion and start-up expected in the third quarter of 2027. At that rate it would pass Suzano's 2.55 million tonne line.
Achieved whenthe mill is running and its output, reported in Arauco's audited accounts or by trade press, approaches 3.5 million tonnes a year.
Claimed by
Arauco, in the World Bank's IFC project disclosure of June 2025; Arauco closed US$2.2 billion of financing in August 2025
Pulp from farm waste
UC Riverside's CELF pilot, a two-storey facility working at multi-kilogram scale, cooks forestry and farm waste into dissolving pulp, the high-purity pulp used to spin textile fibers. The university says the process uses 50% less energy than conventional mills on low-grade biomass and that its pulp has qualified as textile-grade, without saying who tested it.
Achieved whenan outside lab or buyer confirms the pulp grade, and energy use per tonne is measured by someone other than the developer.
Claimed by
UC Riverside, January 2026
Open
01
Robot for the handsheet test
A robot arm that does the hand steps of making handsheets, the standard lab sheets made from a pulp sample to test its strength. The arm places a carrier board on the wet sheet, rolls it with the couch roll (a light roller that lifts the sheet off the wire), lifts and flips the forming screen, covers the sheet and loads it into the dryer.
The briefCredit · unclaimed
Open 01 · the brief
Robot for the handsheet test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot arm that does the hand steps of making handsheets, the standard lab sheets made from a pulp sample to test its strength. The arm places a carrier board on the wet sheet, rolls it with the couch roll (a light roller that lifts the sheet off the wire), lifts and flips the forming screen, covers the sheet and loads it into the dryer.
Why it is still open
On a current automatic sheet former, filling, mixing and draining run by themselves, but the maker's manual lists the transfer to the dryer as six operator steps that ISO 5269-2 requires to be done within one minute. A search found automatic and semi-automatic formers, all of which leave the transfer to a person, and no robotic system for it.
Built with what exists
An automatic Rapid-Köthen sheet former; a low-cost arm supported by Hugging Face's open LeRobot software, such as the SO-101 (Note: "No download"); a robot policy fine-tuned from a few demonstrations, such as NVIDIA GR00T 2 (Note: "Five demonstrations per task") or Runway Praxis-1 (Note: "Open robot model weights").
First step
Book an afternoon in a university pulp lab, film a technician making ten sheets from two camera angles, and write down each hand motion and its time.
Done looks like
Fifty sheets made by the robot and fifty by a technician from the same pulp, filmed. Every robot transfer finishes inside one minute. The gap between robot and technician averages for grammage (weight per square metre) and tensile index (breaking strength scaled by weight) is smaller than the spread within the technician's own sheets, and the tally is published.