BRENNEN

Industries / Mining and materials / Pulp and paper

The paper machine

The paper machine turns a dilute mix of fiber and water into a continuous sheet by draining it on a moving wire, pressing out more water, and drying it on heated cylinders.

5

Milestones achieved, from 1799 to 1981.

2

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1799

    Paper made as a roll

    Louis-Nicolas Robert, working at the Didot family's mill at Essonnes, France, built a machine that formed paper on a continuous belt of wire cloth instead of one sheet at a time in a mould. It was patented on 18 January 1799.

    paper.gatech.edu

    Credit

    Louis-Nicolas Robert

  2. 1807

    The Fourdrinier machine

    In England, Henry and Sealy Fourdrinier hired the engineer Bryan Donkin and built an improved version of Robert's machine in 1807. The brothers invested up to £60,000 and received no royalties because of an error in their patent, while Donkin had designed 191 machines by 1851.

    LessonA flawed patent left the investors with nothing while the machine builder prospered.

    paper.gatech.edu

    Credit

    Henry and Sealy Fourdrinier; Bryan Donkin

  3. 1809

    The cylinder machine

    John Dickinson of Hertfordshire introduced a machine in which a wire-covered cylinder picks fiber up from a vat and passes the wet sheet onto a felt. Cepi describes it as filling wire moulds continuously and couching the sheets onto felt.

    paper.gatech.educepi.org

    Credit

    John Dickinson

  4. 1967

    Drying tissue with hot air

    Procter & Gamble's Lawrence Sanford and James Sisson patented a way to pre-dry tissue by blowing hot air through the wet sheet on a patterned fabric, instead of squeezing it, which gives softer, bulkier and more absorbent tissue and towel (US patent 3,301,746, granted 31 January 1967). The method is called through-air drying.

    patents.google.com

    Credit

    Lawrence H. Sanford and James B. Sisson, Procter & Gamble

  5. 1981

    The shoe press

    A shoe press squeezes the wet sheet between a roll and a long curved shoe instead of two rolls, so the sheet stays under pressure longer. Engineers from Kadant Küsters wrote in 2006 that the first shoe press had started up on linerboard "a quarter of a century ago", that it typically leaves the sheet 4 to 7 points drier than the roll press it replaces, and that most press rebuilds and new machines include one or more. Beloit filed a patent for an extended nip press in September 1981.

    LessonMills bought shoe presses to save steam, but the extra production and cheaper fiber they allowed paid far more.

    pulpandpapercanada.compatents.google.com

    Credit

    Beloit Corporation (patent by Dennis C. Cronin)

Watch for

  1. Forming tissue with air

    VTT, Finland's state research centre, opened an AirLaid pilot line in Jyväskylä in spring 2026. It forms fiber webs in air instead of water, which VTT says cuts water use by about 90%; conventional forming starts with about 99% water and 1% fiber. VTT says the line can make light fiber rolls for tissue and hygiene products, with packaging board a longer-term aim.

    Achieved whena commercial tissue or board machine forms its sheet with air and an outside party publishes its water use and product test results.

    vttresearch.com

    Claimed by

    VTT, April 2026

  2. 1,810 metres a minute

    Voith says APP's Dagang PM 3 in China set a worldwide operating speed record of 1,810 m/min. The release gives no grade, date or duration for the run.

    Achieved whenthe mill or an independent body publishes the grade, the length of the run and how the speed was measured.

    voith.com

    Claimed by

    Voith, May 2026

Open

  1. 01

    Airlaid against wet-formed tissue

    A public, side-by-side test of tissue made from the same pulp on an air-forming pilot line and on a conventional wet-forming pilot machine, with strength, bulk, absorbency and water used per tonne measured the same way for both.

    The brief
    Credit · unclaimed

Open 01 · the brief

Airlaid against wet-formed tissue

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, side-by-side test of tissue made from the same pulp on an air-forming pilot line and on a conventional wet-forming pilot machine, with strength, bulk, absorbency and water used per tonne measured the same way for both.

Why it is still open

VTT's AirLaid line opened only in spring 2026, and VTT names tissue as one of its first products, but its announcement gives no product test results.

vttresearch.com

Built with what exists

Rented time on VTT's AirLaid pilot line and on a wet-forming pilot machine; tissue tests from the ISO 12625 series run at an accredited paper lab; a shared spreadsheet for raw results.

  1. First step

    Ask VTT for a quote and the minimum trial size for pilot time, and find one pulp supplier willing to provide the same pulp for both trials.

  2. Done looks like

    At least ten rolls from each process, tested to the same ISO 12625 methods, with water use per tonne logged for each run, and all raw data published.