BRENNEN

Industries / Construction and property / Commercial and residential construction / Pool construction

Finishes

Finishes are the surface a swimmer touches: the plaster, pebble, tile, paint or plastic membrane that lines the shell, holds the water and gives the pool its color.

4

Milestones achieved, from 1924 to 2004.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1924

    Tile sold as clean lining

    The Associated Tile Manufacturers of Beaver Falls, Pennsylvania, published a booklet in 1924 arguing that tile was the right lining for pools because its "dense, non-absorbent" surface lets dirt and bacterial growth be removed completely. It warned designers against "absorbent pool lining materials" and "wide, porous joints", and showed tiled college and club pools with tile lane lines and depth markings.

    archive.org

    Credit

    Associated Tile Manufacturers

  2. 1946

    Pools repainted every year

    The Portland Cement Association's 1946 guide said painting was "the most common way" to color a concrete pool, but that paint "seldom can be expected to last more than 2 or 3 years" and most pools were repainted every year. It described the alternatives: plaster, or a topping of white portland cement and silica sand floated into the floor, with mineral pigments for color. By 1999 a plaster researcher in the trade wrote that white portland cement and an aggregate such as marble had been "the preferred interior finish" of concrete pools "for most of this century".

    Lessonthe guide blamed most paint failures on poor surface preparation and application, not on the paint.

    archive.orgwatershapes.com

    Credit

    Portland Cement Association

  3. 1980s

    Pebbles join the plaster

    Pool plaster is white cement mixed with a fine aggregate, traditionally crushed marble. A pebble finish uses rounded river pebbles or glass beads instead, and the plasterer washes the surface cement off to expose them. Greg Garrett, director of operations and research at the Phoenix cement products firm Mason Mart, wrote in 1999 that pebble finishes reached the US in significant numbers in the mid-1980s, possibly from Australia, and grew from under 3% of the Phoenix market in 1987 to near 50% ten years later, mainly for their durability. An AQUA Magazine article dates exposed-aggregate pool surfaces to the 1970s.

    watershapes.comaquamagazine.com

    Credit

    no inventor is named in the sources read; Pebble Technology International of Scottsdale, Arizona, is the best-known maker

  4. 2004

    A plaster study disputed

    New plaster can develop spots, gray mottling and rough patches. From 2004 the National Plasterers Council (NPC), a trade group, released studies it had funded at the National Pool Industry Research Center at California Polytechnic State University, San Luis Obispo, which concluded that "aggressive" water, water so out of balance that it dissolves calcium from the surface, causes spot etching. Service-side critics who formed the onBalance group hold that spotting comes from weaknesses built into the plaster, such as excess calcium chloride in the mix and troweling too late, too hard or with added water, citing petrographic studies from labs including CTLGroup. Chemist Marcelle Dibrell reviewed the second phase in 2015, and Stan Pickens, a former chair of the APSP's water quality committee, later reviewed the first; onBalance reports that both found the conclusions unsupported by the data.

    Lessonstudies paid for by one side, and sold at $500 a copy, did not settle the cause of a defect that decides who pays for a resurfacing.

    poolspanews.compoolhelp.com

    Credit

    NPC and Cal Poly; onBalance (Kim Skinner, Que Hales and Doug Latta)

Watch for

  1. A densifier for pebble finishes

    Pebble Technology International (PebbleTec), a brand of Oldcastle APG, launched PebbleShield, an additive it says "densifies and strengthens the cement matrix", "virtually eliminates plaster dust" and improves pigment retention. Plaster dust is calcium hydroxide, a byproduct of curing cement that rises to the surface of a new finish and must be brushed off, by the National Plasterers Council's account. In the same launch PebbleTec said a second product, Slurry Saver, lets crews use 20% to 30% less cement per patch.

    Achieved whenan outside lab or test pool program measures plaster dust, surface hardness and color loss on finishes made with and without the additive.

    finviz.comcdn.ymaws.com

    Claimed by

    PebbleTec, 24 June 2026

  2. A 20-year membrane warranty

    A reinforced PVC membrane is a plastic sheet, welded in place, that lines a pool instead of plaster or tile. RENOLIT announced a 20-year waterproofing guarantee and a five-year warranty against staining for KOLOS, a new membrane for heavily used commercial pools that it says is made to withstand chlorine and abrasion, with 40% recycled material certified by RecyClass.

    Achieved whenpool operators or an outside lab publish stain and wear measurements on KOLOS linings after several seasons of heavy use.

    athleticbusiness.com

    Claimed by

    RENOLIT, 22 September 2025

Open

  1. 01

    A blind test of start-ups

    A test of how new plaster fares under the start-up methods the trade argues over, run by people with no stake: samples from one batch of plaster, applied by three plasterers, put through each start-up method and then kept in water at set chemical balances, photographed, and graded by people who do not know which sample is which.

    The brief
    Credit · unclaimed
  2. 02

    Grade finish damage from photos

    A public set of photos of damaged pool finishes, each labeled with a cause confirmed afterwards (metal stain, scale, etching, mottling, delamination, cracking, organic stain), and a scored test of whether AI vision models can name the cause from the photo.

    The brief
    Credit · unclaimed

Open 01 · the brief

A blind test of start-ups

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A test of how new plaster fares under the start-up methods the trade argues over, run by people with no stake: samples from one batch of plaster, applied by three plasterers, put through each start-up method and then kept in water at set chemical balances, photographed, and graded by people who do not know which sample is which.

Why it is still open

Both existing programs are tied to one side. The Cal Poly studies were funded by the National Plasterers Council and sold at $500 a copy, and its critics report that two chemists' reviews found the conclusions unsupported. onBalance's own two demonstration pools near Tucson, Arizona, each 11 by 7 ft and split in half, compare the traditional, acid, bicarbonate and calcium start-ups, with money from manufacturers, distributors and service groups. A search found no blinded test with open data.

poolhelp.compoolhelp.compoolspanews.com

Built with what exists

Plaster coupons, small flat samples cast from one lot of white cement and marble aggregate; 24 covered plastic tubs with aquarium pumps; water set with food-grade calcium chloride and sodium bicarbonate and adjusted with sodium bisulfate, a dry acid, with no chlorine used; a photometer water test kit; a phone on a fixed stand under fixed light; a free preregistration on the Open Science Framework; Zenodo for the photos and readings; a commercial petrography lab for cross-sections.

  1. First step

    Write the protocol with one plasterer from each side of the dispute and post it on the Open Science Framework before any coupon is cast.

  2. Done looks like

    4 start-up methods by 3 water balances by 6 coupons, kept for 6 months; every coupon photographed weekly and graded blind by three plasterers, with their agreement reported; one coupon in ten sectioned by an outside petrographer; all data public.

Open 02 · the brief

Grade finish damage from photos

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of photos of damaged pool finishes, each labeled with a cause confirmed afterwards (metal stain, scale, etching, mottling, delamination, cracking, organic stain), and a scored test of whether AI vision models can name the cause from the photo.

Why it is still open

Pool & Spa News advises identifying a stain with in-pool test kits before treating it, so that the pool need not be drained and acid washed. Photo tools so far are rule-based guides or cover equipment: Poolometer's photo-driven helper sorts stains by visual pattern with written rules, and SplashLens's AI scanner, previewed in April 2026, is to grade scale and corrosion on heaters and filters, not finishes. A search of Hugging Face's dataset index in November 2026 found no set of pool finish damage.

poolspanews.compoolometer-staging.pages.devpoolens-site.pages.dev

Built with what exists

Photos and job records from pool service and replastering companies, used with owners' consent; stain identification kits to confirm causes; a general AI vision model such as Claude Fable 5.2 (see the Note "Three working devices"); a small open vision model fine-tuned on one graphics card (see the Note "One GPU to fine-tune"); Hugging Face to publish the set.

  1. First step

    Ask one replastering company for 100 before-and-after photo sets in which the cause was established on the job.

  2. Done looks like

    1,000 photos across 7 causes, each confirmed by a test or by what the repair found; accuracy and errors by cause for at least two models, set beside a plaster consultant's calls on the same photos.