BRENNEN

Industries / Energy, water and waste / Oil and gas extraction

Production

Production is bringing oil and gas up from a finished well for years or decades, separating them from water and gas near the well, and dealing with the well at the end of its life.

7

Milestones achieved, from 1925 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1925

    The nodding pump

    When underground pressure is too low to push oil up, a pump must lift it. Walter Trout of Lufkin, Texas, sketched a counterbalanced pumping unit in 1925, the "pumpjack" or "nodding donkey" seen across oilfields, and a prototype was pumping on a Humble Oil well near Hull, Texas, before the year ended.

    aoghs.org

    Credit

    Walter Trout, Lufkin Foundry & Machine Company

  2. 1926

    A pump inside the well

    Armais Arutunoff built his first electric submersible pump, a motor and pump lowered down the well, in Germany in 1916. He received the first patent for a commercial one in 1926, demonstrated it in a Kansas oil well, and founded what became the Reda Pump Company in Bartlesville, Oklahoma.

    aoghs.org

    Credit

    Armais Arutunoff

  3. 1972

    Carbon dioxide moves oil

    In January 1972 Chevron began injecting carbon dioxide, alternating with water, into the SACROC unit of the Kelly-Snyder field in Scurry County, Texas, which held an estimated 2.1 billion barrels of oil originally. The gas mixes with oil left behind after water flooding and helps push it to wells, a method called enhanced oil recovery.

    osti.gov

    Credit

    Chevron

  4. 2015

    Injected water shakes Oklahoma

    Oil wells also bring up large volumes of salt water, which is often pumped back underground. Disposal into Oklahoma's Arbuckle formation peaked in March 2015 at about 16 million cubic meters a month. The state regulator then issued 33 directives cutting volumes and ordering wells made shallower, and a USGS-led study found the depth limits cut earthquake rates by a factor of about four.

    Lessonwhere waste water goes underground matters as much as how much goes.

    oklahoma.gov

    Credit

    Oklahoma Corporation Commission; Robert Skoumal (USGS) and colleagues

  5. 2024

    Lost wells found on maps

    Researchers trained an AI model on about 100 old USGS topographic maps on which people had marked oil-well symbols, then ran it across maps of four counties in California and Oklahoma. It flagged 1,301 possible undocumented orphaned wells (old wells with no owner and no record); 29 were checked by satellite and 15 in the field, according to JPT. A 2021 estimate by the Interstate Oil and Gas Compact Commission puts the US total at 310,000 to 800,000.

    jpt.spe.org

    Credit

    Lawrence Berkeley National Laboratory and the DOE CATALOG consortium

  6. 2025

    A methane satellite goes dark

    MethaneSAT, launched in March 2024 to measure methane leaking from oil and gas regions worldwide, lost contact on 20 June 2025. Its operator, the Environmental Defense Fund, said it had lost power and was "likely not recoverable," and is still releasing the data it collected.

    Lessonindependent monitoring that rests on one satellite can stop without warning.

    edf.org

    Credit

    Environmental Defense Fund

  7. 2025

    Flaring keeps rising

    Oil fields burn off gas they cannot use or sell, a practice called flaring. Satellite data show 167 billion cubic meters flared in 2025, worth an estimated $54 billion, the third yearly rise in a row; nine countries account for more than four-fifths of it, according to the World Bank's Global Gas Flaring Tracker.

    Lessonmeasuring waste from space has not by itself reduced it.

    worldbank.org

    Credit

    World Bank

Watch for

  1. Smaller leaks seen from orbit

    Carbon Mapper's team predicts its Tanager-1 satellite, launched 16 August 2024, can detect single methane sources as small as about 64 to 126 kg per hour under stated light and wind conditions. Tests so far were cooperative controlled releases, where the satellite team knew the release in advance; a single-blind test was under way when the paper was published.

    Achieved whensingle-blind controlled-release results, run by a team outside Carbon Mapper, are published and match the predicted limit.

    amt.copernicus.org

    Claimed by

    Carbon Mapper (Riley Duren and colleagues), November 2025

Open

  1. 01

    Confirm the lost wells

    A desk check of the candidate undocumented wells, using historical aerial photographs and current satellite images, that marks each candidate as confirmed, rejected or unclear, with the dated image as evidence. No site visits.

    The brief
    Credit · unclaimed
  2. 02

    Check plugging records

    A tool that reads scanned plugging reports (the record of the cement plugs set when a well is closed for good), extracts each plug's depth, and checks it against the state's plugging rules for the year the well was plugged.

    The brief
    Credit · unclaimed

Open 01 · the brief

Confirm the lost wells

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A desk check of the candidate undocumented wells, using historical aerial photographs and current satellite images, that marks each candidate as confirmed, rejected or unclear, with the dated image as evidence. No site visits.

Why it is still open

Of the 1,301 candidates flagged in 2024, 29 had been checked by satellite and 15 in the field.

jpt.spe.org

Built with what exists

The candidate list (JPT links it to a National Energy Technology Laboratory map portal); USGS historical aerial photographs; current satellite images; an image model to pre-sort candidates; two human reviewers.

  1. First step

    Obtain the candidate list and classify 50 candidates in one county by hand to settle the rules for "confirmed" and "rejected."

  2. Done looks like

    500 candidates classified, each with dated image evidence, with a second reviewer agreeing on at least 90%, and the list sent to the state regulator and published.

Open 02 · the brief

Check plugging records

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tool that reads scanned plugging reports (the record of the cement plugs set when a well is closed for good), extracts each plug's depth, and checks it against the state's plugging rules for the year the well was plugged.

Why it is still open

A 2024 Los Alamos-led study used a language model to extract only location and depth from 160 historical well records; it was 100% accurate on clean PDF reports but 70% on scanned, image-based ones, and it did not check plugs against rules.

arxiv.org

Built with what exists

Current vision-language models; open-weight models for local runs (Note: "A trillion open parameters"); state imaged-document archives; the state's written plugging rules; two human checkers.

  1. First step

    Download 30 plugging reports from one state archive and measure how well a current vision-language model reads the plug table.

  2. Done looks like

    On 300 scanned plugging reports from one state, plug depths match a human checker in at least 95% of cases, and every well that fails the rule in force when it was plugged is listed with the page and the rule.