Industries / Energy, water and waste / Oil and gas extraction / Offshore drilling
Well design
Well design is planning a well before it is drilled: how heavy the drilling fluid must be, where each string of steel casing goes, and how much room is left between the pressure of the fluid in the rock and the pressure that would crack the rock.
5
Milestones achieved, from 1965 to 2016.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1965
Reading pressure from shale logs
Writing about the Texas and Louisiana Gulf Coast, where overpressured rock was causing drilling problems, C. E. Hottmann and R. K. Johnson showed that the fluid pressure in shale can be estimated from the sound-speed and electrical logs run in a well, by comparing them with the trend expected at normal pressure. Their paper reports an accuracy of about 0.04 psi per foot, or about 400 psi at 10,000 ft, and says such knowledge improves casing programs.
Credit
C. E. Hottmann, R. K. Johnson
2006
Drilling through the salt
Petrobras found oil in 2006 beneath a thick layer of salt off Brazil, in rock it calls the pre-salt, as deep as 7,000 m, Petrobras says. Wells there must be drilled through the salt in deep water. In July 2026 pre-salt fields produced 3,728 thousand of Brazil's 4,498 thousand barrels a day of oil and condensate, about 83%, according to the regulator ANP.
Credit
Petrobras
2007
Cement tops the blowout list
A study by the US Minerals Management Service of the 39 drilling blowouts on the US outer continental shelf from 1992 to 2006 found cementing problems in 18 of them, more than any other cause and a larger share than in 1971 to 1991. Blowouts fell from one in every 246 wells drilled to one in every 387, and shallow gas remained a major cause.
Lessonthe cement around the casing is a pressure barrier, so it needs its own standards and checks.
Credit
David Izon, E. P. Danenberger, Melinda Mayes (Minerals Management Service)
2011
Pressure higher than planned
On 9 November 2011 an appraisal well in Chevron's Frade field off Brazil, in 1,200 m of water, took a kick (an unplanned flow of fluid from the rock into the well). Chevron said the pressure opened part of the hole and oil moved through thin cracks to the seabed. Brazil's regulator ANP found that Chevron had failed to manage pressure while drilling and cited it for 25 infractions. ANP put the leak at about 3,700 barrels, Chevron at about 2,400.
Lessonwhen the pressure forecast is wrong, the rock itself can split and let oil out beside the well, where no valve can close it.
Credit
ANP (investigation); Chevron (operator)
2016
A drilling margin in law
After the Deepwater Horizon blowout, the US regulator BSEE wrote a safe drilling margin into its rules, effective 28 July 2016. The downhole weight of the drilling fluid must be above the rock's fluid pressure and, unless the operator justifies otherwise, at least 0.5 pound per gallon below the lower of the casing-shoe test and the estimated fracture pressure. The same rule requires deepwater and high-pressure, high-temperature wells to be watched from shore in real time.
Credit
Bureau of Safety and Environmental Enforcement (BSEE)
Watch for
A valve for pressure drilling
In managed pressure drilling, the well is sealed at the top and pressure is adjusted from the surface, which lets crews drill where the gap between fluid pressure and fracture pressure is narrow. Noble says it has fitted its BlackHornet drillship, working for BP in the US Gulf, with a stemless gate valve developed with Kinetic Pressure Control that gives a dedicated way to seal the well during managed pressure drilling. It gives no figures and names no outside tester.
Achieved whenBP, BSEE or another outside party reports the valve in routine use, with test or performance figures.
Claimed by
Noble, with Kinetic Pressure Control, August 2026
Open
01
Read Norway's pressure plots
A public table of every formation pressure measurement (a pressure read by a tool pressed against the rock wall) that Norway's offshore regulator publishes only as plot images, with wellbore, depth and pressure for each point, read off the images by a model and checked by people.
The briefCredit · unclaimed02
Measure the margins drilled
A public table that gives, for each casing section of each Norwegian offshore wellbore, the heaviest drilling fluid used below a casing shoe and the leak-off or formation integrity test at that shoe (a test that finds how much pressure the rock just below the casing can take), and so the margin the crew actually drilled with, broken down by water depth and decade.
The briefCredit · unclaimed
Open 01 · the brief
Read Norway's pressure plots
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of every formation pressure measurement (a pressure read by a tool pressed against the rock wall) that Norway's offshore regulator publishes only as plot images, with wellbore, depth and pressure for each point, read off the images by a model and checked by people.
Why it is still open
The Norwegian Offshore Directorate's FactPages offer casing and leak-off tests, mud weights and drill-stem tests as downloadable tables, but formation pressures only as 903 "pressure plot" images covering 898 wellbores. Directorate geologists Fridtjof Riis and Anke Wolff used pore pressures from more than 1,000 Norwegian exploration wells in a 2020 paper, but its abstract points to no public copy of the data. On the UK side, the British Geological Survey has released such measurements for one sandstone formation only. GitHub projects that read FactPages tables were found, but none that reads the pressure plots.
factpages.sodir.nofactpages.sodir.noapi.crossref.orgdata.gov.uk
Built with what exists
The FactPages document table and plot PDFs; PyMuPDF to render the plots; vision-language models that read charts, including open-weight models that run on your own hardware (see the Note "A trillion open parameters"); the drill-stem test table as a cross-check; two human checkers.
First step
Download 20 plots, read their points by hand into a spreadsheet, and score one vision-language model against that hand reading.
Done looks like
All 903 plots read into one table; on 50 plots chosen at random, two people check every point against the image, and at least 95% of points fall within 2 bar and 5 m of the human reading; table and code published with credit to the Directorate.
Open 02 · the brief
Measure the margins drilled
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table that gives, for each casing section of each Norwegian offshore wellbore, the heaviest drilling fluid used below a casing shoe and the leak-off or formation integrity test at that shoe (a test that finds how much pressure the rock just below the casing can take), and so the margin the crew actually drilled with, broken down by water depth and decade.
Why it is still open
The Directorate publishes both measurements as open tables but no margins. Published work on these tests, such as Choi and colleagues' 2021 study of about 3,000 leak-off tests from 1,800 wells, predicts the test result from a well's location and does not compare it with the fluid weights actually used. US rules set a margin of 0.5 pound per gallon (about 0.06 g/cm3) unless an operator justifies less.
factpages.sodir.nofactpages.sodir.nodoaj.orgfederalregister.gov
Built with what exists
The FactPages tables for casing and leak-off tests, drilling mud and exploration wellbores (water depth, year); Python; a language model that reads the public final well reports for lost-circulation events and cites the page it used (see the Note "Findings that cite notes").
First step
Download the three tables, join them on the wellbore ID, and compute margins for one area of the North Sea.
Done looks like
Margins for every section that has both a shoe test and fluid weights below it (a first count made for this file found about 3,300 such sections in about 1,470 wellbores), 50 random sections checked by hand against well reports, and the share of sections drilled closer than 0.06 g/cm3 reported by decade and water depth, with code and data published.