Industries / Transport and vehicles / Automotive
Motorcycle manufacturing
Motorcycle manufacturing designs and builds motorcycles and scooters, two-wheeled vehicles driven by an engine or an electric motor, together with their engines, frames, brakes and electronics.
1894
Hildebrand & Wolfmüller of Munich began selling a motorcycle with a two-cylinder, four-stroke engine of about 1,500 cm³, patented on 20 January 1894 (German patent 78553). The Science Museum Group calls it "the first practical motorcycle to be put on the market", and the Swiss Museum of Transport calls it the first motorcycle made in series.
collection.sciencemuseumgroup.org.uksammlung.verkehrshaus.ch
36
Milestones achieved across 6 domains.
8
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Gottlieb Daimler applied on 29 August 1885 for a patent on a "riding car", a two-wheeler built to carry the small petrol engine he had developed with Wilhelm Maybach. Hildebrand & Wolfmüller put the first motorcycle on sale in 1894, and the Swiss Museum of Transport says several hundred were made before the firm went bankrupt in 1897. Early machines were made in small numbers by hand: BMW's first motorcycle, the R 32 of 1923, was built by hand, 3,100 of them, by the count of the Technik Museum Sinsheim. In 1960 Honda opened a factory at Suzuka in Japan planned around 60,000 Super Cubs a month.
Where it stands
The world bought 65 million new motorcycles and scooters in 2025, by the count of the International Council on Clean Transportation (ICCT): nearly 21 million in India, about 13 million in China and 6.5 million in Indonesia. Of these, 9.9 million, or 15%, were electric, and China bought 73% of the electric ones. Honda, the largest maker, passed 500 million motorcycles built in May 2025 and says it can build more than 20 million a year in 23 countries and regions.
What is open
Makers publish few measured figures for their machines. This research found no public tables of frame stiffness, shock damping, drag and downforce, seat reach with a rider on board, CO2 by model, which small bikes have ABS, or how far electric scooters really go on a charge. Most open jobs are measurements a small team can make with bench rigs, rented dynamometers and ridden tests. AI models that answer fixed questions in bulk can now code thousands of recall reports and crash files, and cheap cameras can check work on the assembly line.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Design
Design decides how a motorcycle or scooter looks, how the rider sits on it and how it moves through the air, working from sketches and clay models to wind tunnels and computer models.
5 · 1 · 2
Last achievedWings move to road bikes2015
Watch forWings that adjust themselves
2
openEngines and drivetrains
This work designs the engine and the parts that carry its power to the rear wheel: the clutch, the gearbox and the final drive by chain, belt or shaft.
6 · 2 · 2
Last achievedIndia's small bikes get injection2020
Watch forAn electrically driven compressor
2
openFrames and suspension
The frame holds the engine, the rider and both wheels in line, and the suspension, a fork at the front and a pivoted swinging arm with a spring and damper at the back, keeps the tires on the road.
6 · 1 · 2
Last achievedThe engine becomes the frame2012
Watch forFrames tuned to flex more
2
openAssembly
Assembly is the factory work of turning frames, engines and bought-in parts into finished motorcycles and scooters on a line, and checking each one before it ships.
6 · 1 · 2
Last achievedOne screw, 43,913 bikes2026
Watch forManaus to 2.3 million
2
openElectric motorcycles
This work designs motorcycles and scooters that run on batteries and electric motors, along with their packs, chargers and swap systems.
6 · 1 · 2
Last achievedAn early maker is liquidated2026
Watch forScooters on the maker's cells
2
openSafety systems
Safety systems are the parts built into the machine that help a rider stop, stay upright and be seen: brakes and the electronics that control them, sensors that read how far the bike is leaned over, radar, and lighting.
7 · 2 · 2
Last achievedProven, but optional in America2023
Watch forABS on every Indian two-wheeler
2
open
Advances to build with
1 research note
Open in motorcycle manufacturing
3 of 12 open deliverables
Open · Design
Drag and downforce, measured openly
A public table of drag area (the drag force divided by the air's dynamic pressure, the usual way to compare vehicles of different sizes) and of front and rear lift for at least ten current production motorcycles, half of them with winglets, each with a rider in a set riding position. Work from 3D scans of real bikes, simulate them with open-source software, and check the simulations against wind-tunnel tests of 1/6 scale printed models.
Built with what exists
A phone photogrammetry app or a handheld 3D scanner, used at dealers with their permission; OpenFOAM, whose standard tutorials include a motorbike-and-rider case to start from; a 3D printer for 1/6 scale models; a university teaching wind tunnel with a force balance; Python for the table.
Open · Engines and drivetrains
A CO2 table for motorcycles
A public table of the CO2 and fuel-use figures measured for each motorcycle and scooter at EU type approval, the official test a model must pass before sale, with model, engine size, model year, figure and the page each figure came from, and a chart of how the figures have moved since Euro 5 began.
Built with what exists
Makers' European spec pages and owner's manuals; a web agent that records each figure with the page it came from (see the Note "Findings that cite notes"); Python and a spreadsheet for the table.
Open · Frames and suspension
Frame stiffness, measured openly
A public dataset of the torsional (twisting), lateral (sideways) and longitudinal (front to back) stiffness of at least ten production motorcycle frames of different types, such as steel tube, aluminum beam and engine-as-frame designs, measured on a bench rig whose drawings are published, with a computer model of each frame checked against its measurement.
Built with what exists
Used frames bought from motorcycle breakers (salvage yards); a welded steel test stand that clamps the swinging arm pivot and loads the steering head; a screw jack with a load cell; dial indicators or laser displacement sensors; a small data logger; a 3D scanner for the frame's shape; CalculiX, a free finite-element program, for the computer models; Python.
Where it sits
Broader
