Industries / Transport and vehicles / Automotive / Motorcycle manufacturing
Design
Design decides how a motorcycle or scooter looks, how the rider sits on it and how it moves through the air, working from sketches and clay models to wind tunnels and computer models.
5
Milestones achieved, from 1950 to 2015.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1950
Wind tunnel at the factory
Moto Guzzi built a wind tunnel at its works in Mandello del Lario, Italy, which Motorcyclist magazine calls the world's first motorcycle wind tunnel. It was an open-circuit tunnel driven by a 900 hp surplus Fiat V12 engine, and a rider on a bike hung from a pendulum in winds of up to 120 mph (about 190 km/h). Guzzi used it to shape the enclosed "dustbin" fairings of its 1950s racing bikes.
Credit
Carlo Guzzi; his brother Giuseppe Guzzi, who designed the structure
1955
Industrial designers join in
Yamaha's first motorcycle, the YA-1 of 1955, was painted in two tones, cream and chestnut red, when most motorcycles of the day were black, by Yamaha's account. The color scheme came from GK (Group Koike), students of Iwataro Koike at what is now Tokyo University of the Arts. GK lists the YA-1, and the later Yamaha YDS-1 and DT-1, among its works.
Credit
GK Design Group; Genichi Kawakami of Yamaha
1958
Designed around a delivery job
Honda's Super Cub C100 was designed so that a rider delivering soba noodles could ride it with one hand, and so that women in skirts could ride it, by Nippon.com's history. It had a low frame to step through, a centrifugal clutch that works without a hand lever, a large plastic leg shield and an economical 50 cc four-stroke engine. Mass production began in August 1958, and Honda counts 100 million Super Cub series bikes built by October 2017, at 16 plants in 15 countries.
LessonHonda's earlier Juno K scooter of 1954, with a fiber-reinforced plastic body, was underpowered for its weight and broke down often; the Cub started from what riders needed to do.
Credit
Soichiro Honda and Takeo Fujisawa of Honda
2000
Safety cell meets helmet law
BMW's C1 scooter surrounded the rider with an aluminum frame that formed a safety cell, with crumple zones, a roll bar, a roof and seat belts, so that it could be ridden without a helmet. Sweden and the UK did not exempt it from their helmet laws, and BMW stopped building it after 2002, having sold about 12,600, by The Autopian's count.
Lessona design that depends on a change in the law sells only where the law changes.
Credit
BMW, from an idea by Bernd Nurtsch at its BMW Technik subsidiary
2015
Wings move to road bikes
Ducati fitted winglets, small wings that press the front wheel down under hard acceleration, to its GP15 MotoGP bike in 2015, and within a season every other maker in the series was building them. The FIM, the sport's governing body, banned the large protruding wings from 2017 on safety grounds, and the wings were folded into the shape of the fairing. MotoGP says modern wings give about 35 to 50 kg of downforce at 350 km/h. By 2026 winglets were fitted to faired sports motorcycles in every class, by Speedweek's account.
Lessonrule makers can take away a racing advantage that endangers riders, and designers then find a safer form for it.
Credit
Ducati Corse
Watch for
Wings that adjust themselves
CFMoto, a Chinese maker, says the production version of its V4 SR-RR superbike will carry active winglets, whose angle changes as the bike rides, with each side controlled separately so that they also work in corners. It claims 12% less drag with the wings flat during acceleration and 45% more downforce with them steep at high speed. Bimota already sells its KB998 Rimini with winglets that adjust automatically.
Achieved whenan independent wind-tunnel or track test of a production bike measures the drag and downforce change and confirms the maker's figures.
Claimed by
CFMoto, with a concept bike shown at EICMA in Milan in autumn 2025 and production planned for the following year, as Speedweek reported in July 2026
Open
01
Drag and downforce, measured openly
A public table of drag area (the drag force divided by the air's dynamic pressure, the usual way to compare vehicles of different sizes) and of front and rear lift for at least ten current production motorcycles, half of them with winglets, each with a rider in a set riding position. Work from 3D scans of real bikes, simulate them with open-source software, and check the simulations against wind-tunnel tests of 1/6 scale printed models.
The briefCredit · unclaimed02
Seat reach, measured laden
A public table for at least 50 current models of how far a seated rider can reach the ground, measured with a weight on board, together with the share of women and men of a given population who could put both feet down, worked out from body-size data.
The briefCredit · unclaimed
Open 01 · the brief
Drag and downforce, measured openly
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of drag area (the drag force divided by the air's dynamic pressure, the usual way to compare vehicles of different sizes) and of front and rear lift for at least ten current production motorcycles, half of them with winglets, each with a rider in a set riding position. Work from 3D scans of real bikes, simulate them with open-source software, and check the simulations against wind-tunnel tests of 1/6 scale printed models.
Why it is still open
Makers' drag figures are not comparable: Cycle World showed in 1999 that a published Aprilia "Cxs" of 0.31 had been read as a drag coefficient when it was not one. Makers now publish downforce figures without saying how they were measured, such as Ducati's 4.8 kg more downforce at 270 km/h for its 2026 Panigale V4 R. The one recent peer-reviewed set found, by Joseph Katz of San Diego State University (SAE, 2022), measures a single sport motorcycle at full and 1/6 scale. No consolidated modern table by model was found.
Built with what exists
A phone photogrammetry app or a handheld 3D scanner, used at dealers with their permission; OpenFOAM, whose standard tutorials include a motorbike-and-rider case to start from; a 3D printer for 1/6 scale models; a university teaching wind tunnel with a force balance; Python for the table.
First step
Run OpenFOAM's motorbike tutorial, scan one bike with a phone, and write to Katz to ask whether his full-scale results can serve as a check case.
Done looks like
Drag area and front and rear lift at 100, 200 and 300 km/h for ten models, scans, meshes and results public under an open license, and at least two models also tested in a wind tunnel at scale, with the gap between simulation and tunnel reported for each.
Open 02 · the brief
Seat reach, measured laden
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table for at least 50 current models of how far a seated rider can reach the ground, measured with a weight on board, together with the share of women and men of a given population who could put both feet down, worked out from body-size data.
Why it is still open
Spec sheets give only an unladen seat height. Honda's own UK guide for shorter riders tells buyers to ignore that figure, because seat width and shape matter, and because the rear suspension sinks 20 to 40 mm under a rider on its Africa Twin (quoted seat height 850 to 870 mm). The fit simulator found, Cycle-Ergo, takes a rider's height and inseam; it is a simulator, not a set of measurements. Searches found no per-model table of measured reach.
Built with what exists
A tape measure for the "leg arc" (the distance from the ground on one side, over the seat where the rider sits, to the ground on the other side), a ruler for laden seat height, a calibrated 80 kg weight bag, phone photos; ANSUR II, the 2012 US Army body-size survey of 4,082 men and 1,986 women, free to download, as a first population; Python.
First step
Measure five bikes at one dealer, twice each, and see how far the laden leg arc differs from what the published seat height suggests.
Done looks like
50 models measured unladen and laden, each by two people with the repeatability reported, and a check with 20 riders of known inseam of whether the table predicts if they can put both feet flat, on their toes or only one foot down.