BRENNEN

Industries / Transport and vehicles / Automotive / Motorcycle manufacturing

Frames and suspension

The frame holds the engine, the rider and both wheels in line, and the suspension, a fork at the front and a pivoted swinging arm with a spring and damper at the back, keeps the tires on the road.

6

Milestones achieved, from 1935 to 2012.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1935

    Suspension at both ends

    BMW's R12 and R17, introduced in 1935, had telescopic front forks damped with oil, and the National Motorcycle Museum in Iowa says they "may have been the first production motorcycles" with such forks. The same year Stanley Woods won the Senior TT on the Isle of Man on Moto Guzzi's 500 cc V-twin, whose sprung rear end, with friction dampers adjustable from the saddle, ended the run of Norton's bikes with rigid rears, by Motor Sport magazine's account.

    nationalmcmuseum.orgmotorsportmagazine.com

    Credit

    BMW; Moto Guzzi and Stanley Woods

  2. 1946

    The body is the frame

    Piaggio's Vespa scooter had no separate frame. Its body of pressed steel panels, spot-welded together, carried the loads, a design called a monocoque, and its front wheel hung from one side on a single arm, like an aircraft's landing gear, so it came off as easily as a car's wheel. The engine and gearbox formed one unit with the rear wheel, with no chain. The patent was filed in Florence on 23 April 1946, and Piaggio says a million were built in ten years.

    iom3.orgwide.piaggiogroup.compiaggiogroup.com

    Credit

    Corradino D'Ascanio, an aircraft engineer; Enrico Piaggio

  3. 1950

    The Featherbed frame

    The brothers Rex and Cromie McCandless gave Norton an all-welded steel frame with two loops of tube around the engine (a duplex frame) and a pivoted rear fork with suspension. Norton's racing team used it from 1950, and its rider Harold Daniell said it rode like a featherbed, which gave the frame its name. The Featherbed-framed Manx became the tool of choice for professional racers worldwide, by MCNews's account.

    mcnews.com.au

    Credit

    Rex and Cromie McCandless; Norton

  4. 1985

    Aluminum frames for road bikes

    Yamaha raced an aluminum frame it calls the Deltabox on Kenny Roberts's YZR500 (0W70) in 1983, used it on the TZR250 road bike in 1985 and on the FZR1000 sold in Europe from 1987, by Yamaha's history. Yamaha still uses the Deltabox name for the frames of its YZF-R1 road bike and its MotoGP bike.

    global.yamaha-motor.comglobal.yamaha-motor.comglobal.yamaha-motor.comglobal.yamaha-motor.com

    Credit

    Yamaha

  5. 2003

    Frames cast, not welded

    Yamaha's CF aluminum die casting, first used on the 2003 YZF-R6, made large, thin-walled aluminum frame parts in mass production by die casting, forcing molten metal into a steel mold. Yamaha says it cut the number of parts and gave designers more freedom in laying out the chassis, and it has since used the method on other sport bikes and large scooters, and on snowmobiles and outboard motors.

    global.yamaha-motor.com

    Credit

    Yamaha

  6. 2012

    The engine becomes the frame

    Ducati's 1199 Panigale had no main frame. Its engine was the main structure: a hollow aluminum box (a monocoque) that also served as the airbox bolted to the front of the engine and held the steering head, and the swinging arm bolted to the back. Cycle World attributes 11 lb (about 5 kg) of the bike's weight saving over the 1198 to this layout. Cycle World's Kevin Cameron wrote in 2018 that this chassis was at first too stiff, and that the Panigale V4's replacement, four struts joining the steering head to the engine, was built to flex sideways by a set amount so that the tires keep their grip over bumps at high lean. Suzuki's Koichiro Kawata described the same aim for Suzuki's MotoGP frame in a 2015 SAE paper: low stiffness to the side, high stiffness front to back for braking.

    Lessona stiffer frame is not always better; leaned over, some designed flex keeps the tires gripping.

    magazine.cycleworld.commagazine.cycleworld.comsaemobilus.sae.org

    Credit

    Ducati; Suzuki

Watch for

  1. Frames tuned to flex more

    Ducati says the new front frame of its 2025 Panigale V4 road bike, shared with the 2026 Panigale V4 R race bike, has 40% less lateral stiffness than the frame before it, and that with a new double-sided swinging arm it lets the bike hold tighter lines and grip better leaving corners.

    Achieved whenan outside lab measures the lateral stiffness of the old and new frames and confirms the stated reduction.

    crash.net

    Claimed by

    Ducati, as reported by Crash.net in September 2025

Open

  1. 01

    Frame stiffness, measured openly

    A public dataset of the torsional (twisting), lateral (sideways) and longitudinal (front to back) stiffness of at least ten production motorcycle frames of different types, such as steel tube, aluminum beam and engine-as-frame designs, measured on a bench rig whose drawings are published, with a computer model of each frame checked against its measurement.

    The brief
    Credit · unclaimed
  2. 02

    Shock curves in the open

    A public set of force-velocity curves, how hard a damper pushes back at each speed of movement, for the standard rear shocks of at least 20 widely sold motorcycles, measured whole on a shock dynamometer at two adjuster settings, with the shocks' spring rates.

    The brief
    Credit · unclaimed

Open 01 · the brief

Frame stiffness, measured openly

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public dataset of the torsional (twisting), lateral (sideways) and longitudinal (front to back) stiffness of at least ten production motorcycle frames of different types, such as steel tube, aluminum beam and engine-as-frame designs, measured on a bench rig whose drawings are published, with a computer model of each frame checked against its measurement.

Why it is still open

Makers design side flex on purpose, as Suzuki's 2015 SAE paper and Ducati's 40% claim show, but publish no stiffness figures. Lab rigs exist, such as the one Bocciolone and colleagues at the Politecnico di Milano described in 2005, but their results cover single frames and are not shared as a dataset. Searches found no table of measured stiffness across models.

witpress.comsaemobilus.sae.org

Built with what exists

Used frames bought from motorcycle breakers (salvage yards); a welded steel test stand that clamps the swinging arm pivot and loads the steering head; a screw jack with a load cell; dial indicators or laser displacement sensors; a small data logger; a 3D scanner for the frame's shape; CalculiX, a free finite-element program, for the computer models; Python.

  1. First step

    Buy one used frame from a breaker, build the pivot clamp, and measure its torsional stiffness three times to see how repeatable the rig is.

  2. Done looks like

    Ten frames, each tested three times in each direction, stiffness given in N·m per degree and N per mm with its spread, rig drawings and raw data public, and the computer model within 15% of the bench figure for at least half the frames.

Open 02 · the brief

Shock curves in the open

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of force-velocity curves, how hard a damper pushes back at each speed of movement, for the standard rear shocks of at least 20 widely sold motorcycles, measured whole on a shock dynamometer at two adjuster settings, with the shocks' spring rates.

Why it is still open

Cycle World began printing suspension dyno charts with its dirt-bike tests in November 1975 and said they would be part of every test, but no current public collection of standard-shock curves was found. Aftermarket makers measure their own: Penske says it provides a dyno graph with every new shock, service or rebuild, and its software opens and compares dyno files a user already has.

magazine.cycleworld.compenskeshocks.com

Built with what exists

Used standard shocks from breakers, tested whole and never opened, since many hold nitrogen under pressure; dyno time hired by the hour from a suspension shop, or a crank-driven rig built with a load cell and a linear position sensor; Python for the curves.

  1. First step

    Buy three used standard shocks for one common model and ask a local suspension shop for an hour of dyno time.

  2. Done looks like

    20 shocks measured twice each, curves and raw data public under an open license, and three of them measured again on a second dyno with the difference reported.