Industries / Mining and materials / Chemicals and petrochemicals / Refining / Lubricants
Specifications and testing
Testing shows that a lubricant meets a grade, whether a viscosity grade, a performance category written by carmakers and oil makers, or one carmaker's own approval, using standard laboratory and engine tests.
7
Milestones achieved, from 1904 to 2020.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1904
ASTM forms Committee D02
ASTM Committee D02 on Petroleum Products and Lubricants was formed in 1904. It now has 2,428 members and jurisdiction over 863 standards, published in five volumes of ASTM's Annual Book of Standards, and meets twice a year. The lab and engine methods that lubricant specifications cite, such as ASTM D445 for kinematic viscosity and the engine tests below, are ASTM standards.
Credit
ASTM International
1929
Viscosity index defined
Oil thins as it heats, and some oils thin much more than others. In 1929 Dean and Davis of Standard Oil set a scale on which oils refined from Pennsylvania crudes, which thinned least, scored 100 and oils from Texas Gulf Coast crudes, which thinned most, scored 0, comparing viscosities at 100 °F and 210 °F. ASTM D2270 still computes the viscosity index, now from viscosities at 40 °C and 100 °C, as "a single number indicating temperature dependence"; new base oils and additives later pushed values above 100.
Credit
Dean and Davis, Standard Oil
1947
API sorts motor oils
The American Petroleum Institute (API) introduced three motor oil classes in 1947: Regular, Premium and Heavy Duty. It replaced them with ML, MM and MS in 1952, and in 1971 with a letter system, SA to SD, that adds a letter each time engines need more: SE in 1972, SF in 1980, SG in 1987, SH in 1992, SJ in 1996, SL in 2001, SM in 2004, SN in 2010, SP in 2020 and SQ in 2025.
Credit
API
1993
Licenses and shelf audits
API launched its Engine Oil Licensing and Certification System (EOLCS) in 1993, a voluntary program that licenses marketers to print API's marks, such as the "donut" giving category and viscosity grade and the "starburst" for oils meeting carmakers' ILSAC standards. Vehicle and engine makers set the requirements, with ASTM, SAE and the American Chemistry Council. Since 1994 API's Aftermarket Audit Program has bought licensed oils in the market and tested them for elements, viscosity at 100 °C and high-temperature high-shear viscosity against the formulations on file; it replaced an earlier program funded by the US Army, the Independent Lubricant Manufacturers Association, US carmakers and API. API also posts oils found using its marks without a license, from the United States, Mexico, the United Arab Emirates and Malaysia among others.
Credit
API, with Ford, General Motors, Fiat Chrysler, the Japan Automobile Manufacturers Association and the Truck and Engine Manufacturers Association
2013
Europe checks self-certified oils
In Europe, oil companies claim the ACEA Oil Sequences (the European carmakers' engine oil categories) by self-certification, backed by tests in accredited labs under a code of practice, and registering a product with ACEA is only recommended. In 2013 the European lubricant industry's technical association, ATIEL, began quality surveys run by an independent body; its 2015 survey found some products that failed specifications and some making incompatible ACEA claims, mostly, ATIEL said, because marketers misunderstood the requirements, and each marketer's results were kept confidential. In the United Kingdom, the trade group UKLA formed the Verification of Lubricant Specifications (VLS) body, whose review of its first ten years covered 90 complaints, most about incorrect claims, such as oils claiming both ACEA A3/B4 and C3, which their chemistry cannot both meet.
LessonSelf-certification needs checking from outside, and most failures found were claims marketers did not understand, not bad oil.
Credit
ATIEL; UKLA and VLS
2017
New Mexico sues Dollar General
On 6 June 2017 New Mexico's attorney general, Hector Balderas, sued Dollar General for selling its DG Auto motor oils in New Mexico from 2010 to February 2017. Two were made to API category SF, unsuitable for vehicles built after 1988, and one to SA, unsuitable for vehicles built after 1930, yet they were shelved beside brand-name oils as cheaper equivalents; the complaint said their use could damage engines and their emission controls.
LessonAn obsolete category stays legal to sell, so a label that names a real grade can still mislead a buyer.
Credit
New Mexico Office of the Attorney General
2020
Tests for turbocharged engines
API set 1 May 2020 as the first licensing date for ILSAC GF-6A, GF-6B and API SP, which took seven years and seven new tests to develop. Two of the tests run a 2012 Ford 2.0-liter EcoBoost engine. Sequence IX (ASTM D8291) counts low-speed pre-ignition, fuel igniting too early in a turbocharged direct-injection engine at low speed and high load, over four runs of 175,000 firing cycles per cylinder; an interim category, API SN Plus, had already adopted it. Sequence X (ASTM D8279) passes an oil only if the timing chain stretches no more than 0.085% in 216 hours. GF-6B came with a new mark, the Shield, so that SAE 0W-16 oils go only where carmakers recommend them. ILSAC GF-7 and API SQ followed on 31 March 2025, with more than 1,800 GF-7 products licensed by August 2025, and API let GF-6 oils stay on sale until 1 October 2026, an 18-month overlap instead of the usual 12, at marketers' request.
fuelsandlubes.comswri.orgswri.orgtheshopmag.comfuelsandlubes.com
Credit
ILSAC and API; test procedures run by laboratories such as Southwest Research Institute
Watch for
Heavy-duty oils for 2027
API approved its PC-12 specification for heavy-duty diesel engine oils in April 2026 and set 1 January 2027 as the first date oils may be licensed under the new categories, API CL-4 and API FB-4, for 2027 model-year engines. It names gains in oxidation resistance, wear protection, seal compatibility and protection of exhaust aftertreatment, and lower viscosity grades for fuel economy.
Achieved whenlicensed CL-4 and FB-4 oils are on sale after 1 January 2027 and engine makers call for them in their 2027 engines.
Claimed by
API (Bill O'Ryan, director of EOLCS), April 2026
Tests for EV fluids
At a June 2025 meeting of ASTM Subcommittee D02.97, chaired by Infineum's Angela Willis, General Motors and Toyota said tests written for combustion engines miss the problems of electric drive units, such as foaming at high speed, copper corrosion and the fluid's electrical breakdown. Toyota's Venkat Deshpande urged a minimum industry standard for e-transaxle fluids and said Toyota's own durability tests had run to 400,000 miles without significant degradation. Two tests were nearing ballot: ASTM D8544, which soaks circuit boards in fluid to measure copper corrosion and conductive deposits, and work item WK87553 on wire corrosion. A high-speed aeration test was due for an interlaboratory study in the first half of 2026.
Achieved whenthe tests are published with precision figures from interlaboratory studies and a carmaker group or standards body writes them into an EV fluid specification.
Claimed by
ASTM D02.97 members, reported September 2025
Open
01
Listings checked against licenses
A repeatable audit of how often engine oils sold online show API marks, or claim API SP, SQ or CK-4, without an API license. Take a random sample of listings from large online marketplaces in several countries, match each product to API's free online directory of licensees, and send a sample of matching and non-matching bottles, bought sealed at retail, to an accredited lab for viscosity at 100 °C, high-temperature high-shear viscosity and elements. Report rates by marketplace and country.
The briefCredit · unclaimed02
Data sheets against grade limits
A free, machine-readable table of the published limits that each claimed grade implies, such as SAE J300's viscosity ranges and minimum high-temperature high-shear viscosities and ACEA's limits on sulfated ash, phosphorus and sulfur, plus a checker that reads marketers' product data sheets and flags any whose stated typical values cannot meet the grade they claim, or whose claims cannot all be true at once.
The briefCredit · unclaimed
Open 01 · the brief
Listings checked against licenses
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A repeatable audit of how often engine oils sold online show API marks, or claim API SP, SQ or CK-4, without an API license. Take a random sample of listings from large online marketplaces in several countries, match each product to API's free online directory of licensees, and send a sample of matching and non-matching bottles, bought sealed at retail, to an accredited lab for viscosity at 100 °C, high-temperature high-shear viscosity and elements. Report rates by marketplace and country.
Why it is still open
API buys oils "from the field" and returns test results to licensed marketers through its licensing system, but it publishes no rates, only a list of products found using its marks without a license. The Institute of Materials has tested about 650 store-shelf oils a year from 24 countries since 1984, but sells the data and samples shops, not online listings. Searches in November 2026 found no published audit of online listings against API's directory.
Built with what exists
API's EOLCS licensee directory; a browser agent such as Browser Use to collect listings where the marketplace's terms allow (see the Note "Deleting 80% to start over"), or sampling by hand; an AI model to read listing text and label photos, every match checked by a person; an ISO/IEC 17025 accredited oil lab running ASTM D445, ASTM D4683 and ASTM D5185.
First step
Pull 100 "0W-20 API SP" listings from one marketplace and check each against the directory by hand to settle the matching rules.
Done looks like
At least 1,000 listings from at least three marketplaces in at least three countries matched to the directory, a random 10% re-checked by a second person, and at least 30 bottles tested, published with the method; every named marketer is given 30 days to respond before publication.
Open 02 · the brief
Data sheets against grade limits
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free, machine-readable table of the published limits that each claimed grade implies, such as SAE J300's viscosity ranges and minimum high-temperature high-shear viscosities and ACEA's limits on sulfated ash, phosphorus and sulfur, plus a checker that reads marketers' product data sheets and flags any whose stated typical values cannot meet the grade they claim, or whose claims cannot all be true at once.
Why it is still open
VLS's review of 90 UK complaints found most involved incorrect claims, including oils claiming both ACEA A3/B4 and C3, which need incompatible amounts of sulfated ash, phosphorus and sulfur. ATIEL's 2015 survey found incompatible claims too, but kept results confidential. A 2026 paper by Nadji Belkheiri on Zenodo sets out steps to verify oil claims against one carmaker's manuals but does not check data sheets at scale. Searches of GitHub ("SAE J300", "lubricant datasheet") and the web in November 2026 found no such checker.
Built with what exists
The ACEA Oil Sequences (free PDFs from ACEA); one purchased copy of SAE J300 to confirm the limits; marketers' public data sheets; an AI document reader to pull grades, claims and typical values, every flag checked by a person (see the Note "Seven more flagged"), run locally on an open-weight model if needed (see the Note "A trillion open parameters"); Python and pandas.
First step
Write ACEA's C2, C3, C5 and C6 limits as a table and check 50 data sheets of oils claiming ACEA C3 by hand.
Done looks like
At least 3,000 data sheets from at least 25 marketers in at least five countries parsed, field accuracy of 95% or better on a hand-checked random 10%, and a public list of every flagged sheet with the rule it breaks, each re-checked against the marketer's current sheet.