Industries / Food, farming and forestry / Agriculture and farming / Irrigation
Center pivots
A center pivot is a long sprinkler pipe carried on wheeled towers that turns slowly around a fixed point, usually a well, and waters a circle; a lateral move is the same machine driven in a straight line across a rectangular field.
5
Milestones achieved, from 1974 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1974
Electric towers and corners
Frank Zybach's first pivots were pushed around the field by pistons worked by the water pressure itself. Valley Manufacturing, which licensed his patent in 1954, says it spent the next decade converting the design to electric drive, and in 1974 it put rubber tires and gear drives on its Standard Electric and Long Span Electric models and unveiled what it calls the industry's first corner option, an extra span that swings out to water the corners a circle misses. In 2024 University of Nebraska extension described an electric motor on each tower as the common drive, and swing-arm corner spans as a standard option.
Credit
Valley Manufacturing (now Valmont Industries)
1981
Water laid on the furrow
Low energy precision application (LEPA) hangs drop tubes from the pipe so that water leaves at very low pressure a few centimetres above the soil, instead of being sprayed from the top of the pipe. William Lyle and James Bordovsky of Texas A&M first published the method in 1981. In their 1979 and 1980 field tests, as summarized by the Pacific Northwest Laboratory for the US Department of Energy in 1983, LEPA reached application efficiencies (the share of pumped water that ended up where the crop could use it) of about 87% to 99%, against about 78% to 79% for high-pressure sprinklers on the same plots. In Idaho trials in 2014 and 2015, catch cans set out by researchers from Washington State University and the University of Idaho caught on average 18% more water under low elevation spray application (LESA), sprays hung just above the soil, than under the mid-elevation sprays most pivots use.
LessonWater put on the soil all at once can pond and run off; in the first tests LEPA needed small basins tilled into the furrows to hold it.
Credit
William M. Lyle and James P. Bordovsky (Texas A&M); R. Troy Peters, Howard Neibling and Richard Stroh (LESA trials)
2008
Saudi Arabia ends desert wheat
Saudi Arabia paid farmers to grow wheat from the 1970s and reached self-sufficiency in 1985, on fields watered entirely by center pivots drawing fossil groundwater, water stored underground for thousands of years that rain no longer replaces. In 2008 the government announced it would cut its wheat purchases by 12.5% a year from 2009 and end domestic production by 2016; agriculture ministry officials gave the depletion of that water as the main reason, according to the US agricultural attaché. NASA reported in 2019 that the groundwater under the pivots around Wadi ad-Dawasir is more than 30,000 years old by carbon-14 dating, and that the water table there has dropped by as much as 6 m a year since the 1980s, citing a United Nations report.
LessonIn the words of FAO grain economist Abdolreza Abbassian, "They learned the hard way that this is not a land that you produce wheat on.".
Credit
Saudi Ministry of Agriculture (programme and phase-out); reported by the USDA attaché and World Grain
2019
Brazil maps every pivot
Brazil's National Water Agency (ANA) and Embrapa Milho e Sorgo, a federal research centre, mapped every center pivot in the country from satellite images for dates from 1985 to 2017 and published the maps as open files. They counted 1.476 million ha under pivots in 2017, 47 times the area mapped in 1985 and three times that of 2000. An Embrapa update with data to October 2024 found 2,200,960 ha watered by 33,846 pivots, with western Bahia now the largest cluster.
Credit
ANA and Embrapa Milho e Sorgo
2023
Worn nozzles cost yield
Nebraska Extension ran catch-can tests, with cups set every 9 to 10 feet (about 3 m) under the pipe, on three eastern Nebraska pivots that were 21, 34 and 38 years old and still carried their original sprinkler nozzles. Their uniformity of water application was 78%, 59% and 23%; after new nozzles were fitted it rose to 92%, 90% and 74%, against a manufacturer's recommendation of at least 90%, and the third pivot's shortfall was put down to a weak pump. Under one pivot, whose field grew soybeans and corn, the team put the 2022 yield loss at about $23,500, against $6,500 for the new nozzle package and labor, and on two pivots the depth caught in the cups differed from the depth set on the control panel.
LessonA sprinkler package wears out without any sign a farmer can see at the control panel.
Credit
Bruno Lena, Mailson Freire de Oliveira, Luan Pereira de Oliveira and Travis Prochaska (Nebraska Extension, with Nebraska Soybean Board funding)
Watch for
Even water by design
Reinke says its E3 center pivot, with sprinkler outlets spaced evenly every 30 or 60 inches (76 or 152 cm) along every span and end boom, "exceeds USDA Center Pivot Evaluation and Design (CPED) water uniformity benchmarks"; CPED is a US Department of Agriculture program that predicts how evenly a pivot applies water. The machine won the 2026 AgTech Breakthrough award for irrigation innovation, which is a prize, not a test.
Achieved whena university or other outside party publishes catch-can uniformity tests of E3 machines working in farmers' fields.
Claimed by
Reinke Manufacturing, August 2026
Towers that report faults
Valley Irrigation says hardware in each tower box, linked over the power line to its Icon control panel, now reports each tower's position, tire pressure, run time, alignment and water pressure, so that a farmer learns which tower is stuck instead of getting one safety fault for the whole machine. It says it aims next to predict breakdowns and schedule service before they happen.
Achieved whenan outside party, such as a university or a group of growers, publishes how many breakdowns in a season were flagged in advance and how many were missed.
Claimed by
Valley Irrigation (Valmont), in Farm Progress, October 2026
Open
01
How fast nozzles wear
A public wear curve for center pivot sprinkler nozzles. Collect the old nozzles that dealers remove when they replace a sprinkler package, with each pivot's age, hours of use and water source; measure each nozzle's flow on a bench at its rated pressure; and compare it with the maker's chart for that nozzle size.
The briefCredit · unclaimed02
Rut-proof wheels, side by side
A one-season field comparison of the ways sold to stop pivot towers digging ruts in wet soil: standard tires, larger tires, airless and track-style wheels such as Zimmatic NFTrax and Valley's Revolution Airless, and dry-wheel packs, half-circle sprinklers beside each tower that keep water off the wheel track. Measure rut depth at marked stations on each tower's track once a month.
The briefCredit · unclaimed
Open 01 · the brief
How fast nozzles wear
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public wear curve for center pivot sprinkler nozzles. Collect the old nozzles that dealers remove when they replace a sprinkler package, with each pivot's age, hours of use and water source; measure each nozzle's flow on a bench at its rated pressure; and compare it with the maker's chart for that nozzle size.
Why it is still open
Nebraska Extension's 2023 tests found pivots 21 to 38 years old still on their original nozzles, with uniformity as low as 23%, but they covered three machines and gave no rule for when a package should be replaced. No study measuring how fast pivot spray nozzles wear with age was found.
Built with what exists
A bench of PVC pipe fed from a water tap through a pressure regulator and a digital pressure gauge; a bucket, scale and stopwatch, or an inline flow meter; a set of pin gauges to measure each orifice; the makers' published nozzle flow charts; and a phone camera with an open vision-language model, run on a laptop, to read the size number and color on each nozzle and log it (see the Note "A first stable number for local AI").
First step
Ask two irrigation dealers to keep the nozzles they remove during this winter's retrofits, and bench-test one pivot's full set.
Done looks like
At least 1,000 used nozzles from at least 20 pivots of known age, each with measured flow against chart flow, published as a curve of flow increase against years of use, split by maker and by sandy or clean water source, with all data released.
Open 02 · the brief
Rut-proof wheels, side by side
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A one-season field comparison of the ways sold to stop pivot towers digging ruts in wet soil: standard tires, larger tires, airless and track-style wheels such as Zimmatic NFTrax and Valley's Revolution Airless, and dry-wheel packs, half-circle sprinklers beside each tower that keep water off the wheel track. Measure rut depth at marked stations on each tower's track once a month.
Why it is still open
Advice on these wheels rests on experience, not measurement. A University of Delaware extension writer reported in 2023 that airless tires "have achieved varying degrees of success" and that most experiences with plastic tires "have not been positive", and Utah State University's track guide reports dealers' view that plastic tires sold to reduce rutting "often do not work well". Agriculture Victoria notes that most makers treat a warranty as void on machines running in ruts deeper than 100 mm. No published side-by-side rut measurements of the newer wheels were found.
Built with what exists
A phone or tablet with a LiDAR depth scanner and a free 3D-scanning app to record each rut's cross-section; a straightedge and tape measure to check the scans; GPS-tagged stakes to mark stations; a soil moisture probe; the grower's log of stuck-tower stops. All scans are taken with the pivot parked and switched off.
First step
Find a grower or dealer already running two wheel types on one machine, and scan ten stations of each track while the pivot is parked.
Done looks like
At least four pivots on rut-prone soils, each with two wheel types on comparable towers, 50 marked stations per track scanned monthly through one season, with published rut depth and width by wheel type and soil, the share of stations deeper than 100 mm, and stuck-tower stops per machine.