Industries / Mining and materials / Chemicals and petrochemicals / Industrial gases
Cylinders and bulk delivery
This is the work of getting gas from the plant to the user, either compressed into steel or aluminum cylinders that are filled, delivered, collected and refilled, or carried as a very cold liquid by road tanker to a storage tank at the customer's site.
7
Milestones achieved, from 1886 to 2026.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1886
Seamless steel cylinders
From about 1850, gases traveled in leaky metal vessels or in leather and cloth bags. In 1886 Howard Lane and Richard Taunton in England patented methods for making high-pressure gas cylinders, and Max and Reinhard Mannesmann in Germany patented a way of making seamless steel tube, tube with no welded joint along it, that was soon adapted to cylinders. Gas could now travel safely at up to 100 bar (about 1,450 psi), and the first international rule for carrying high-pressure gas followed in 1890. The first users were shipments of oxygen from Brin's Oxygen Company in London.
Credit
Howard Lane and Richard Taunton; Max and Reinhard Mannesmann; Brin's Oxygen Company, per Ebbe Almqvist's History of Industrial Gases (2003)
1897
Acetylene in a porous mass
Acetylene, the fuel gas of the welding torch, can explode when it is compressed on its own. In the late 1890s firms in Germany and France tried to ship it as a liquid, and a 1925 Prest-O-Lite handbook records "many disastrous explosions". Georges Claude and Albert Hess found that large amounts of acetylene dissolve in acetone, and Henry Le Chatelier proposed holding the solution in a cylinder packed with a porous filler, which also lets the gas come out evenly. The first porous mass was made in 1897, and a plant at Malakoff, near Paris, was filling such cylinders by 1898. Linde's calcium silicate filler, approved in the US in 1941, became the type used in nearly every acetylene cylinder, according to a 1992 history by Ralph Tribolet, a Linde cylinder engineer.
LessonSome gases cannot be shipped safely as a plain compressed gas or a liquid, and the container has to be designed around the gas's chemistry.
Credit
Georges Claude and Albert Hess; Henry Le Chatelier
1981
Computers plan the deliveries
In October 1981 Air Products began running a computer system that forecasts how much gas each customer's tank will use and draws up each day's tanker deliveries, so that no tank runs out and the trucks drive as little as possible. Its optimizer solved problems with up to 800,000 variables, and the authors report savings of 6 to 10% of operating costs. Air Liquide's 2016 challenge papers credit this work as the first statement of what operations researchers now call the inventory routing problem: deciding when to refill each customer and by which route.
Credit
Bell, Dalberto, Fisher, Greenfield, Jaikumar, Kedia, Mack and Prutzman, for Air Products and Chemicals (Interfaces, 1983)
1988
A cylinder alloy withdrawn
Aluminum cylinders made from alloy 6351 can slowly grow cracks while they sit under pressure, a failure called sustained-load cracking. Luxfer, a large cylinder maker, says the cracks usually take eight or more years to cause a leak and in rare cases a rupture, and it stopped using 6351 in June 1988; alloy 6061 is now used by all US makers. Older cylinders stayed in service for decades. After diving cylinders made of 6351 failed and seriously hurt people, WorkSafe New Zealand withdrew approval for diving and breathing-apparatus cylinder designs in 6351 from 31 October 2017, and in 2018 the UK Health and Safety Executive advised that cylinders in 6351 or the British alloy HE30 be used only after a visual check and eddy-current testing, an electrical test for cracks.
LessonCylinders last for decades, so a weakness in their metal can surface long after production stops, and inspectors need to know what each cylinder is made of.
Credit
Luxfer (the change of alloy); WorkSafe New Zealand and the UK Health and Safety Executive (later action)
2012
A cylinder that shows contents
Linde launched GENIE in several European countries in January 2012: a steel-lined cylinder wrapped in carbon fiber inside a recyclable polyethylene jacket, lighter than a steel cylinder, with a built-in digital display that shows how much gas is left, and for welders, how many minutes of welding. It works at 300 bar and holds more gas than a standard 200 bar steel cylinder, 30% more in Linde's 2012 announcement and about 50% more on Linde's current Benelux product page. It is still sold in 2026.
Credit
Linde
2016
Delivery planning made public
For the ROADEF/EURO Challenge 2016, run by the French and European operations research societies, Air Liquide published a version of its own planning problem: trucking liquid oxygen from air separation plants to hospital tanks whose levels it watches by telemetry, remote readings sent from each tank, with rules for drivers, trailers and tanks. It released data sets and a program that checks any proposed plan. Teams competed from July 2015 to July 2016 and were ranked on data they had not seen, and the data, checker and best results remain online.
Credit
Air Liquide; ROADEF and EURO
2026
Ten-year tests by ultrasound
In the US a steel cylinder must be requalified, tested and re-marked, at set intervals before it can be refilled, usually by a hydrostatic test in which it is filled with water under pressure. A rule effective 3 September 2026 lets bundles of DOT 3A and 3AA steel cylinders in non-poisonous gas service be requalified every ten years instead of five, by ultrasonic examination, which uses sound waves to find cracks and thin walls, or by the water test with a visual inspection. It adopts into the general rules a special permit, SP 14175, that individual companies had held.
Credit
the Pipeline and Hazardous Materials Safety Administration (PHMSA); the Compressed Gas Association, whose standard C-20 sets out the ultrasonic method
Watch for
Ultrasound for all steel cylinders
The Compressed Gas Association asked PHMSA to allow ultrasonic requalification for all DOT 3-series steel cylinders, as its earlier petition P-1727 requested, and pointed out that a previous rule (HM-219D) had by mistake allowed it only for 3T cylinders and cylinders held under special permits. PHMSA said in August 2026 that it will consider the change in a future rulemaking.
Achieved whenPHMSA publishes a final rule that lists the remaining 3-series cylinders as eligible for ultrasonic examination.
Claimed by
the Compressed Gas Association, in comments on PHMSA's July 2025 proposal; PHMSA, August 2026
Open
01
Read cylinder stamps by phone
A phone app that photographs the markings stamped into a cylinder's shoulder (specification, serial number, maker, test dates and sometimes the alloy) and reads them into a record. It finds the latest test date even when older dates are still visible, and flags cylinders that are overdue for requalification or made from withdrawn alloys such as 6351 and HE30.
The briefCredit · unclaimed02
An AI agent plans tankers
Give a general-purpose AI coding agent the Air Liquide delivery problem from the ROADEF/EURO 2016 challenge, let it write, run and improve its own planner, and score the planner with the challenge's official checker under the challenge's 30-minute time limit.
The briefCredit · unclaimed
Open 01 · the brief
Read cylinder stamps by phone
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone app that photographs the markings stamped into a cylinder's shoulder (specification, serial number, maker, test dates and sometimes the alloy) and reads them into a record. It finds the latest test date even when older dates are still visible, and flags cylinders that are overdue for requalification or made from withdrawn alloys such as 6351 and HE30.
Why it is still open
Away from test stations the check is done by eye. A US cylinder may not be filled unless it has been requalified and marked, UK guidance tells users to look all round the shoulder because old test dates may be left visible, and the safety bulletins on 6351 and HE30 ask users to find affected cylinders by their markings. Machines at test stations already read the markings: Swiss Safety Center built a fully automatic re-test machine for a food company that reads the data engraved on the shoulder by OCR (optical character recognition, software that reads text from images), and an Indian machine builder advertises in-line OCR inspection. Research on reading stamped steel characters exists, such as a 2026 preprint using a detection transformer with PaddleOCR. Searches in November 2026 found no phone tool and no public data set of photographed cylinder markings.
Built with what exists
A phone camera and a small lamp held at a low angle, so the stamped characters cast shadows; PaddleOCR, or a small vision model fine-tuned on one graphics card (see the Note "One GPU to fine-tune"); Label Studio to label the photos; the US marking rules in 49 CFR part 180 to parse the fields.
First step
With permission, photograph the shoulders of 50 empty cylinders at a welding supply store or a university gas store and transcribe them by hand as the first labeled set.
Done looks like
On a public test set of at least 500 photographed cylinders from several makers, the app reads the serial number and latest test date correctly for at least 95% of cylinders, judged against two human readers, and flags every overdue or 6351 cylinder planted in the set.
Open 02 · the brief
An AI agent plans tankers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Give a general-purpose AI coding agent the Air Liquide delivery problem from the ROADEF/EURO 2016 challenge, let it write, run and improve its own planner, and score the planner with the challenge's official checker under the challenge's 30-minute time limit.
Why it is still open
The 2016 teams built their solvers by hand over a year, and later work published improved solutions, but searches of arXiv and GitHub in November 2026 found no attempt by an AI agent on this problem. CO-Bench, a 2025 benchmark that tests language-model agents on 36 optimization problems, includes a vehicle routing problem but not this one. The challenge's final results page lists the best scores to beat.
Built with what exists
The challenge's data sets and checker from roadef.org; an AI coding agent that writes programs, runs them and fixes them from the results (see the Note "Three working devices"); an ordinary computer for the timed runs.
First step
Download the B data sets and the checker, and run the agent on the smallest data set with a 30-minute limit.
Done looks like
The planner's score, the challenge's cost per kilogram delivered, on every data set in the B and X groups, set beside the best scores on the final results page, with the code and the agent's full working log published. Coming within 2% of the best published score on most data sets would be a clear result.