Industries / Construction and property / Commercial and residential construction / Glazing
Installation
Installation is the site work of getting glass and windows into their openings: unloading and lifting them, setting each pane in its frame with putty, beads or gaskets, and sealing the joint between window and wall so that water stays out.
5
Milestones achieved, from 1850 to 2006.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1850
Glazing from rolling wagons
For the Great Exhibition hall in Hyde Park, Joseph Paxton had the roof and wall sashes, the wooden frames that hold the glass, made by machinery, and they were "fitted and finished before they are brought to the place", so that "little more is required on the spot than to place the finished materials", he told the Society of Arts in a lecture reported on 16 November 1850. The Illustrated London News of 7 December 1850 showed the glaziers working from covered wagons whose four wheels ran along the roof gutters, with a box of glass on each side and room on the platform for two or three men. Chance Brothers of Smethwick supplied the panes, 49 by 10 in (124 by 25 cm), which Charles Dickens's weekly Household Words called the largest ever made of sheet glass; Paxton put the glass at about 900,000 sq ft (84,000 m²) and over 400 tons. Years earlier Paxton had designed a sash bar with a groove to hold the glass, because putty kept "becoming continually displaced by sun, frost, and rain".
victorianweb.orgvictorianweb.orgdjo.org.ukrevolutionaryplayers.org.uk
Credit
Joseph Paxton; Chance Brothers and Company
1963
Suction cups for glass
Howard Wood ran an auto repair shop in Wolf Point, Montana, and had built a hand vacuum tool for holding engine valves when a glazier friend suggested a version for glass. By his company's history, he began making vacuum cups for handling glass in 1963, patented the design in March 1966, and in the late 1960s developed a battery-powered vacuum lifter to hang below a crane hook. His cups carried a red-line indicator that warned the user when vacuum was being lost. Vacuum lifting is now standard practice: SafeWork NSW, the work safety regulator in New South Wales, Australia, tells businesses never to restrain glass by hand and to use "the right mechanical aid – glass lifting grab, clamp, vacuum or suction cup lifter".
Credit
Howard Wood; Wood's Powr-Grip Co
1996
Leaks found around windows
For Canada Mortgage and Housing Corporation (CMHC), the engineering firm Morrison Hershfield surveyed 46 wood-frame apartment buildings in the coastal climate of British Columbia's Lower Mainland, 37 with water damage and 9 without. Its report of 22 November 1996 found that water entered the walls at interface details, "primarily at windows", and at the edges of decks and balconies; 38 of the 45 window-related problems were on stucco-clad walls. It concluded that relying on CSA A440, the Canadian window performance standard, to control the quality of installed windows "is not adequate since it does not deal with window perimeter interface details".
LessonA window that passes its own test can still leak where it meets the wall, so the joint around it needs rules of its own.
Credit
Morrison Hershfield Limited; CMHC
2001
A standard for installing windows
ASTM International's E2112, Standard Practice for Installation of Exterior Windows, Doors and Skylights, written by its Subcommittee E06.51, has editions back to E2112-01, of 2001, in ASTM's list; the current one is E2112-19c. It covers windows, patio doors and skylights in houses and light commercial buildings, from checks before installation to checks after, and sets out flashing procedures, including pan flashing, a tray under the window that sends any water that gets past it back outside. The practice states that poor installation "contributes to excessive air, water and sound leakage, and condensation", and that it is meant as the basis for training manuals and programs, while warning that it does not "provide fail-safe installation methods".
Credit
ASTM Subcommittee E06.51
2006
A glass crate falls
On 9 January 2006, at a house in New York State, three workers installing curtain walls of double-paned insulated glass were tilting two crates of glass, weighing about 1,859 lb and 1,943 lb (843 kg and 881 kg), so that they leaned against each other in an "A" frame. One crate overcame the other and both fell, killing a 60-year-old ironworker. New York's Fatality Assessment and Control Evaluation program (NY FACE) recommended staging crates with a crane and keeping them on the hook until chocked and braced, a job hazard analysis before the work, and written procedures. Such accidents are not rare: in an alert about 160 kg (350 lb) of balustrade glass that fell from a truck-mounted A-frame onto a worker in August 2018, WorkSafe Queensland counted 157 accepted workers' compensation claims for injuries from falling glass since 2012, about 31 a year, 40% of them serious.
LessonGlass is often most dangerous before it is installed, when heavy crates and stacks lean on frames with people standing in front of them.
health.ny.govhealthweb-back.health.ny.govworksafe.qld.gov.au
Credit
NY FACE, New York State Department of Health; WorkSafe Queensland
Watch for
Robots set facade anchors
Before a curtain wall goes up, crews mark out and fix steel anchors along each floor edge, often leaning out over it. Raise Robotics, of San Francisco, says its mobile robots, which carry one or two arms, do this layout, drilling and fastening, have worked more than 3,500 hours on US sites with no incidents, and saved JR Butler, a Colorado glazing contractor, two months on a Memphis healthcare project after hand layout errors on the first two floors cost over $130,000 in rework. Earlier, in January 2025, the glazing contractor Harmon said it used the robots on high-rise work and valued the as-built record of where each anchor went; the claims that about 30% of hand-set fasteners are "not installed in the right spot" and that the robot places them within ±3/16 in (±4.8 mm) came from Raise's cofounder.
Achieved whena glazing contractor or other outside party publishes measured anchor positions against the drawings for robot-set and hand-set floors of the same building.
Claimed by
Raise Robotics, in a journal article by its cofounders Gary Chen and Conley Oster, July 2025
Open
01
A robot that glazes frames
A robot arm that glazes a storefront-style aluminum frame standing upright at ground level, the way frames stand on site and the way a glazier does it there: it finds the opening with a camera, lifts the pane with a suction cup, rests it on two setting blocks (the small rubber pads the glass sits on), centers it with equal clearance at the edges, then snaps in the glazing beads that hold it and rolls in the rubber wedge gaskets that seal it. Panes stay small (about 300 by 400 mm, under 2 kg), and plastic stand-ins are used until the method works.
The briefCredit · unclaimed02
A tipping check for crates
A free calculator that says how far a crate or stack of glass can lean, or how unequal two crates leaning on each other can be, before it tips, for the cases where people get crushed: staging crates into an "A" frame, unloading from a truck-mounted A-frame, and opening a crate on sloping ground. Check its answers with scale-model crates on a tilting board.
The briefCredit · unclaimed
Open 01 · the brief
A robot that glazes frames
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot arm that glazes a storefront-style aluminum frame standing upright at ground level, the way frames stand on site and the way a glazier does it there: it finds the opening with a camera, lifts the pane with a suction cup, rests it on two setting blocks (the small rubber pads the glass sits on), centers it with equal clearance at the edges, then snaps in the glazing beads that hold it and rolls in the rubber wedge gaskets that seal it. Panes stay small (about 300 by 400 mm, under 2 kg), and plastic stand-ins are used until the method works.
Why it is still open
Window factories have automated parts of this work where sashes lie flat on a line: Schüco's GC 100 machine inserts the clips into glazing beads, a step its maker calls "one of the most labour-intensive, time-consuming processes in window assembly". On site, where frames already stand upright in the wall, setting glass is still hand work. The glazing robots that suppliers such as GGR hire out are lifting machines driven by an operator: GGR describes them as carrying more of the load and giving installers more control where the glass goes in. Research robots place whole curtain-wall panels with suction cups, such as a six-legged robot tested in simulated site conditions in 2025, whose authors note that large panels often need several workers. Raise Robotics lists caulking, welding and overhead anchors as its next jobs, not glazing. A GitHub search for "glazing robot" in November 2026 found one workshop repository that streams VR tracker positions and no robot that sets glass or presses in beads.
Built with what exists
A collaborative arm with a payload of 3 kg or more, such as a Franka FR3 or Universal Robots UR5e, with a small vacuum cup and a wrist camera; offcuts of a commercial storefront frame with its beads, wedge gaskets and setting blocks from a glazing supplier; 4 mm laminated glass or polycarbonate panes; the LeRobot library for recording demonstrations and training (see the Note "No download"); a robot model that learns from a few demonstrations, such as NVIDIA's GR00T 2 (see the Note "Five demonstrations per task") or Runway's open Praxis-1 weights (see the Note "Open robot model weights"); a fixed camera and calipers for scoring.
First step
Buy a short length of storefront frame with its beads and gaskets, glaze and unglaze it by hand ten times on video, and write down each step and its time.
Done looks like
20 filmed attempts on each of three frame sizes, with a published tally of panes set with the blocks where the frame maker's instructions place them, the edge clearance on all four sides within the maker's tolerance, every bead and gasket fully seated, and no chipped edges; a person scores each attempt from the video and caliper readings, and the time per pane is compared with a glazier doing the same frames.
Open 02 · the brief
A tipping check for crates
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free calculator that says how far a crate or stack of glass can lean, or how unequal two crates leaning on each other can be, before it tips, for the cases where people get crushed: staging crates into an "A" frame, unloading from a truck-mounted A-frame, and opening a crate on sloping ground. Check its answers with scale-model crates on a tilting board.
Why it is still open
The investigations and alerts give rules but no numbers. NY FACE's report on the 2006 death recommends cranes, chocks and bracing for crates of 843 and 881 kg that tipped while being leaned together; WorkSafe Queensland tells duty holders to use racks rated for "material weights applied, potential wind loads and travel path side angles" and to design storage "for forces resulting from unbalanced loads"; SafeWork NSW says never to stand in front of glass while loading or unloading. JS Burgess, a British maker of glass A-frames, explains that a loaded frame tips once its center of mass falls outside its base, pushed by sloping ground, an impact or wind, and that site-specific tipping conditions are worked out in structural engineers' reports; it publishes no calculator, and none of these sources covers two crates leaned on each other. A Crossref search in November 2026 for calculations of glass crate tipping or staging found only the NY FACE report.
health.ny.govworksafe.qld.gov.ausafework.nsw.gov.aujsburgess.co.uk
Built with what exists
Rigid-body statics written in Python or a spreadsheet; 1:5 scale plywood crates loaded with sand or steel to scaled weights (at 1:5, weight falls by 5 × 5 × 5 = 125 times); a hinged board raised by a screw jack, with a phone inclinometer app; a luggage scale to measure pushing force; a camera to film each tip.
First step
Build two 1:5 crates weighted to 6.7 kg and 7.1 kg, the NY FACE crate weights divided by 125, lean them together into an "A" on the tilting board, and record the board angle at which they tip, ten times.
Done looks like
50 scale-model configurations, varying crate weights, lean angles, ground slope and unequal pairs like the NY FACE case, with the predicted and measured tipping angles agreeing within 2° in at least 45 of them; the calculator, data and videos published under an open license; and the published incidents above re-worked with the calculator to show how small their margins were.