BRENNEN

Industries / Construction and property / Commercial and residential construction / Glazing

Glass walls

Glass walls are curtain walls and storefronts: thin outer walls of glass in a light frame, hung from or fixed to a building's floors and columns instead of carrying the building's weight.

7

Milestones achieved, from 1918 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1918

    Glass hung past the columns

    Willis Polk designed the Hallidie Building in San Francisco as an investment for the University of California, and it was finished in September 1918. Its floors reach out past the columns, so no columns stand in the street front, and the iron and glass facade hangs beyond them. The building's National Register nomination, prepared in 1970, calls the front "internationally significant in its anticipation of the glass curtain wall, one of the first clear expressions of such". Docomomo US, which records modern buildings, calls it "the first known glass-fronted building" and says it set a precedent for the curtain-walled towers of the 1950s and 1960s.

    npgallery.nps.govdocomomo-us.org

    Credit

    Willis Polk

  2. 1971

    Glass held by silicone

    In structural silicone glazing, glass is held to its frame by a bead of silicone that is both the adhesive and the seal, with no screws or clamps on the outside, which gives a flush all-glass face. By the account of Thomas F. O'Connor, a former chairman of ASTM's committee on building seals and sealants, PPG Industries' Total Vision System of the mid-1960s first used silicone to stick glass to glass mullions, and the first multistory building with glass held by silicone on all four edges went up in 1971: the architects and engineers Smith, Hinchman & Grylls reclad two sides of their own Detroit headquarters. Because there was no track record, many quality checks were set up for the job, and many of them were later written into ASTM's standards for the method.

    astm.org

    Credit

    PPG Industries; Smith, Hinchman & Grylls (now SmithGroup); ASTM Committee C24

  3. 1973

    Panes fall from Hancock Tower

    While the 60-story, 790 ft (241 m) John Hancock Tower in Boston, designed by I. M. Pei & Associates, was being built in 1972 and 1973, at least 65 of its 10,344 mirror-glass windows cracked and many fell to the ground. After a windstorm on 20 January 1973 the problem was undeniable, and by April plywood covered more than an acre (0.4 ha) of the face. Simpson Gumpertz & Heger, the engineers who investigated, say their study of the fracture surfaces showed that the failure was rooted in the design of the double-pane insulating glass units, and more than ten thousand were replaced with single panes of fully tempered glass. A gag order on the parties to the dispute kept the cause from the public for 17 years.

    LessonThe tower did sway in the wind, but that was not why the glass broke, and the secrecy let myths about the cause spread for decades.

    sgh.combritglass.org.uk

    Credit

    Simpson Gumpertz & Heger, investigators

  4. 1975

    A wall without mullions

    The Willis Faber and Dumas office in Ipswich, England, designed in 1970 and 1971 by Foster Associates with the structural engineer Anthony Hunt and built from 1973 to 1975, is wrapped in toughened, bronze-tinted glass "specially commissioned from Pilkington". The whole skin hangs from the edge of the roof-level floor. Its 2 m wide panes have no mullions (the vertical frame bars of an ordinary curtain wall) and are joined at their corners and at floor levels by pairs of small rectangular "patch fittings". Historic England listed the building at Grade I in 1991, citing among its new features its "curvilinear glass curtain walling".

    britishlistedbuildings.co.uk

    Credit

    Foster Associates; Anthony Hunt; Pilkington

  5. 2001

    Lever House rebuilds its wall

    Lever House on Park Avenue, finished in 1952 by Skidmore, Owings & Merrill (SOM), wrapped an office tower in blue-green glass and stainless steel and was copied across US downtowns; New York made it the city's first Modernist landmark in 1982. By the 1990s water had seeped in behind the steel mullions, and the carbon steel inside the glazing pockets rusted and swelled, bowing the horizontal mullions and breaking most of the spandrel glass, the opaque panels in front of the floor edges. Only 1% of the original glass was intact, by SOM's count. After the Landmarks Preservation Commission approved SOM's replacement design in 1997, a new wall with concealed aluminum glazing channels, stainless steel mullions and heat-strengthened glass was completed in 2001.

    LessonSteel hidden inside a glass wall's frame rusted where water reached it, so how a wall drains the water that gets in decides how long it lasts.

    som.comnyc.gov

    Credit

    SOM; Lever Brothers and Unilever; New York City Landmarks Preservation Commission

  6. 2013

    A tower melts car parts

    Sunlight reflected from 20 Fenchurch Street, a 37-story tower then being built in the City of London and nicknamed the "Walkie-Talkie", melted the wing mirror, panels and badge of a Jaguar parked on Eastcheap in about two hours, the BBC reported on 2 September 2013. The developers, Land Securities and Canary Wharf, apologized, paid the £946 repair bill and said they were looking into the light reflecting from the building, and the City suspended three parking bays nearby.

    LessonA glass face can send sunlight onto a street hot enough to melt plastic, so where its reflections fall has to be checked before it is built.

    bbc.com

    Credit

    Land Securities and Canary Wharf, developers

  7. 2020

    Glass that birds can see

    Birds hit glass because they see the sky or plants reflected in it or through it; Loss and colleagues estimated in the journal The Condor in 2014 that building collisions kill 365 to 988 million birds a year in the US. New York City's Local Law 15 of 2020, first sponsored by Council Member Espinal, passed the Council on 10 December 2019, became law on 10 January 2020 when the mayor returned it unsigned, and took effect a year later. New buildings, and alterations that replace all of a building's exterior glass, must use bird-friendly materials, with a threat factor of 25 or less on the American Bird Conservancy's collision test, on the outside walls up to 75 ft (22.9 m) above the ground, with no more than 10 sq ft (0.93 m²) of other material in any 10 ft by 10 ft square, and on glass railings and other hazards at any height.

    nyc.govnycbirdalliance.orgapi.crossref.org

    Credit

    New York City Council; NYC Bird Alliance (then NYC Audubon), which campaigned for it

Watch for

  1. A walking curtain-wall robot

    Five researchers describe a six-legged robot for installing curtain-wall panels on uneven site ground: a walking chassis that carries 300 kg, a folding hydraulic arm with an 80 to 100 kg load at its tip, and suction cups that pick a panel from the ground. In experiments that "simulated construction scenarios", they say, it walked and placed panels at the required angles at the same time, without slipping or falling; the paper gives no figures for placing accuracy or time per panel.

    Achieved whenthe robot installs panels on a real building and an outside party, or a peer-reviewed paper, reports the measured position error and time per panel against a crew doing the same work.

    arxiv.orgarxiv.org

    Claimed by

    Xiao Liu, Weijun Wang, Tianlun Huang, Zhiyong Wang and Wei Feng, in an arXiv preprint, September 2025

Open

  1. 01

    Testing the bird glass law

    A before-and-after test of whether New York's bird-friendly glass rule is reducing collisions: compare dead and injured birds found at buildings approved under Local Law 15 since January 2021 with those at similar older buildings on the same streets, season by season, using the records volunteers already collect.

    The brief
    Credit · unclaimed
  2. 02

    A casebook of glass failures

    A free, searchable record of documented glass wall failures (falling panes, blown-out windows, broken spandrels, leaks), each with its public sources and coded for cause, building age at failure, glass type and outcome, so that designers and students can see what goes wrong and how often.

    The brief
    Credit · unclaimed

Open 01 · the brief

Testing the bird glass law

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A before-and-after test of whether New York's bird-friendly glass rule is reducing collisions: compare dead and injured birds found at buildings approved under Local Law 15 since January 2021 with those at similar older buildings on the same streets, season by season, using the records volunteers already collect.

Why it is still open

The law is argued over on cost and hope, not measured results. In January 2026 The Real Deal quoted Jeff Blau of Related Companies, the developer, saying that complying would cost about $2 million on one city-subsidized housing project, and set that against the record bird deaths of recent fall migrations, with no figures on whether the law works. NYC Bird Alliance, which campaigned for it, says the law "will help reduce" collisions. Web and Crossref searches in November 2026 found studies of treated glass on single buildings but no evaluation of a citywide bird-glass law.

therealdeal.comnycbirdalliance.orgnyc.gov

Built with what exists

Collision records from NYC Bird Alliance's Project Safe Flight monitoring, run since 1997, and reports to its public dBird.org site; NYC Open Data building permits and certificates of occupancy to find buildings approved under the law; the city's PLUTO tax-lot file for building age and height; street photos to confirm each facade's glass; Python with a count model such as negative binomial regression.

  1. First step

    Ask NYC Bird Alliance for Project Safe Flight route records since 2015, and list which buildings on its routes received new-building or full-reglazing permits after January 2021.

  2. Done looks like

    At least 50 buildings approved under the law and 50 matched older buildings, followed through at least two spring and two fall migrations, with collisions per building per season and confidence ranges for each group, and the building list, data and code published so that someone else can rerun it.

Open 02 · the brief

A casebook of glass failures

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free, searchable record of documented glass wall failures (falling panes, blown-out windows, broken spandrels, leaks), each with its public sources and coded for cause, building age at failure, glass type and outcome, so that designers and students can see what goes wrong and how often.

Why it is still open

The cases are scattered. New York's Department of Buildings counts glass curtain walls among the "big three" facade concerns on its high-rise buildings and sorts their failures into impact, detailing, hardware and material science, but publishes them as slides from a 2019 talk. The cause of the best-known failure, at Boston's Hancock Tower, was kept from the public by a gag order for 17 years. A web search in November 2026 found case studies spread across conference papers, a student wiki and a subscription defects directory, but no public, coded collection.

nyc.govbritglass.org.uk

Built with what exists

Court opinions, building department records, accident alerts and engineering conference papers; a low-cost AI model to read the documents and fill in a coding sheet, with a person checking each record (see the Note "The jobs agents repeat"); DOB's four failure categories as the starting codes; a spreadsheet or a small database published on GitHub.

  1. First step

    Code the glass curtain wall cases in DOB's 2019 presentation and the Hancock Tower case, then find and code ten more from building department records.

  2. Done looks like

    At least 100 failures from at least five countries, each with at least one public source; a second person recodes 20 of them, and their agreement on cause is published alongside the data.