Industries / Mining and materials / Steel and metals / Foundries and casting
Cleaning and finishing
Cleaning and finishing is the work of knocking a casting out of its mold, cutting off the gates and feeders, blasting away burnt-on sand and grinding the casting to its final shape.
5
Milestones achieved, from 1870 to 2017.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1870
Sand thrown by air
Benjamin Chew Tilghman of Philadelphia patented cutting, grinding and engraving stone, metal, glass and wood with a stream of sand or quartz grains driven against them at speed (US patent 108,408, granted 18 October 1870). Wheelabrator, which descends from the company he set up in London, says he invented the process in 1869. Foundries took up sandblasting to clean castings, and a company history of Wheelabrator's American forerunner credits it with an early "humane" sandblast room that took workers out of the harmful, sand-laden air they had worked in.
Lessonthe cleaning method itself filled the air with sand dust.
Credit
Benjamin Chew Tilghman
1933
Shot thrown by a wheel
American Foundry Equipment Co. of Mishawaka, Indiana, began adapting centrifugal blasting to foundry work in 1930 and in 1933 introduced the Wheelabrator, which throws metal shot from a spinning wheel instead of blowing sand with compressed air. A company history says it cleaned in one fifth of the time of air blasting with one sixteenth of the power; those are the company's figures. Wheelabrator credits a 1933 patent by Louis D. Peik and notes that a German firm, Badische Maschinenfabrik, patented a blast wheel in 1893.
Credit
Louis D. Peik and American Foundry Equipment Co
1988
Silica sand banned for blasting
Britain's Control of Substances Hazardous to Health (COSHH) Regulations 1988 prohibit using sand or any other substance containing free silica as an abrasive for blasting articles, and revoked the Blasting (Castings and Other Articles) Special Regulations 1949 that had governed the blasting of castings. The ban continues in Schedule 2 of the COSHH Regulations 2002.
LessonBritain removed silica sand from blasting outright rather than only limiting its dust.
Credit
the UK government
2002
A limit on grinder vibration
Hand grinders used to fettle castings shake the hands and arms, which can damage blood vessels, nerves, bones and joints. EU Directive 2002/44/EC set a daily exposure limit for hand-arm vibration of 5 m/s² and an action value of 2.5 m/s², both averaged over 8 hours. Britain's Health and Safety Executive (HSE) notes that large fettling grinders can exceed 7 m/s² and be used for up to 3.5 hours a day, and gives a case, supplied by Triplex Williams, of a robot cell that holds castings against grinding and cut-off wheels so that its operator only loads parts and is not exposed to vibration.
Credit
the European Parliament and Council; HSE
2017
Europe's silica dust limit
Directive (EU) 2017/2398 added work that produces respirable crystalline silica dust, dust fine enough to reach deep into the lungs, to Europe's list of cancer-causing work, and set a binding limit of 0.1 mg/m³, to be written into national law by 17 January 2020. In the US, OSHA's limit of 50 µg/m³ has been enforced in foundries and the rest of general industry since 23 June 2018, and OSHA's guidance on it works through the example of a foundry making large castings, where exposures exceed the limit on days of casting cleaning.
Credit
the European Parliament and Council; OSHA
Watch for
Grinding cell that plans itself
CapSen Robotics, with Ohio State University, Southwest Research Institute and Yaskawa, built under the ARM Institute a cell that scans a casting, rebuilds it in 3D, finds the parting-line flash (the thin fin of metal that forms where the mold halves meet), plans the grinding path and grinds, with no explicit CNC programming. The ARM Institute reports that it ran this sequence on two shapes, an I-beam and a T-pipe, using reused test parts with weld metal added to stand in for flash, and gives no figures for time or accuracy.
Achieved whenthe cell finishes real foundry castings of shapes it was not set up for, and someone outside the team publishes cycle times and the flash left behind.
Claimed by
CapSen Robotics and the ARM Institute, June 2026
Open
01
Foundry silica since the rule
A public table, with the code that builds it, of every OSHA silica air sample taken in US foundries, showing year by year and job by job how often samples exceeded today's limit before and after enforcement began in June 2018.
The briefCredit · unclaimed02
Robot learns flash grinding
A low-cost robot arm that learns from a handful of human demonstrations to hold a part against a fixed sanding drum and remove parting-line flash, tested on 3D-printed plastic replicas of castings with printed fins standing in for flash, with eye protection and dust extraction at the bench.
The briefCredit · unclaimed
Open 01 · the brief
Foundry silica since the rule
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table, with the code that builds it, of every OSHA silica air sample taken in US foundries, showing year by year and job by job how often samples exceeded today's limit before and after enforcement began in June 2018.
Why it is still open
The latest national analysis of OSHA's silica samples by industry, by Brent Doney and three co-authors in 2020, used samples from 1979 to 2015, before the current standard; it found foundries among the two industries where silicosis made up the largest share of deaths. OSHA publishes its sampling results for each year through 2026. A search in November 2026 found no analysis of foundry samples taken under the current standard.
Built with what exists
OSHA's Chemical Exposure Health Data downloads; Python and pandas; the US industry codes for foundries (NAICS 3315); GitHub for the notebook.
First step
Download the 2015 to 2025 files, filter them for crystalline silica and foundry industry codes, and count the samples per year.
Done looks like
A published notebook that rebuilds the table from OSHA's raw files and gives, for each year from 2010 to 2025, the number of personal silica samples in foundries and the shares above 50 and 25 µg/m³, with the selection rules written out and checked by an occupational hygienist outside the team.
Open 02 · the brief
Robot learns flash grinding
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A low-cost robot arm that learns from a handful of human demonstrations to hold a part against a fixed sanding drum and remove parting-line flash, tested on 3D-printed plastic replicas of castings with printed fins standing in for flash, with eye protection and dust extraction at the bench.
Why it is still open
Robot fettling cells in production run programs made for each part: GF Casting Solutions' cell from FILL picks a cavity-specific program built from CAD data, and HSE's case describes pre-programmed sequences. CapSen's 2026 cell plans its paths from a scan, not from people, and reports no figures. DecompGrind (March 2026) learned grinding force from a small number of demonstrations on 3D-printed workpieces, but not flash on casting shapes. A search in November 2026 found no published tally of a learned policy removing flash from casting shapes it had not seen.
Built with what exists
The SO-101 arm and the LeRobot library (see the Note "No download"); a policy model that learns from few demonstrations, such as NVIDIA GR00T 2 (see the Note "Five demonstrations per task"); a bench sanding drum; a 3D printer; calipers or a phone 3D scanner.
First step
Print five replica castings with 1 mm fins along a parting line and record 10 demonstrations of a person guiding the leader arm on two of them.
Done looks like
10 replica shapes not used in training, 20 filmed attempts on each, with the flash height left, the time taken and any gouges in the part measured and published beside the same tally for a person doing the job.