BRENNEN

Industries / Consumer goods / Textiles and apparel / Footwear

Design and lasts

Design is the work of shaping a shoe before it is made. It covers the last (the foot-shaped form a shoe is built on, which sets its shape and fit), the style lines drawn on that last, the flat pattern pieces the upper is cut from, grading (scaling a design into a run of sizes), and the samples made to check the result.

6

Milestones achieved, from 1620 to 2024.

3

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1620

    Straight lasts take over

    Flat shoes made for a left or a right foot "are said to have been commonplace" until heels came in around 1590, by SATRA's account (SATRA is a footwear research and testing body). The simple machines that turned out lasts in quantity could make only symmetrical ones. Shoemakers found identical lasts easier to work with than mirror-image pairs that had to allow for a high heel. After around 1620, nearly all footwear was made on "straights", one identical last for both feet, and the practice ran for over 200 years. The FIDM Museum dates straight soles from about 1600 and says they saved makers the cost of a separate left and right last. They disappeared only in the late nineteenth century, and SATRA says some shoes were still made on straights in the 1890s.

    LessonThe trade gave up fit to save the cost of a second last, and comfort came back only when machines made mirrored pairs cheap.

    satra.comfidmmuseum.org

    Credit

    no maker is named; it was the practice of the trade

  2. 1819

    A lathe that copies

    In 1819 Thomas Blanchard patented a "wood-turning lathe for cutting irregular forms", by the US National Park Service's account. An iron master form turns while a guide wheel rolls over it. The guide wheel steers a cutting wheel through the same movements on a turning wooden blank, much like a key-cutting machine. Springfield Armory adopted it for gunstocks and holds the only surviving example, dated 1822. Private industry used it to make shoe lasts, axe handles and wagon wheel spokes, and the American Precision Museum says its chief use turned out to be wooden lasts. SATRA writes that an adapted gunstock lathe, able to make a mirror copy of a model, began the slow return of left and right lasts. It also says last-duplicating machines of the early 1900s made about 1,000 lasts a day.

    home.nps.govledger.americanprecision.orgsatra.comsatra.com

    Credit

    Thomas Blanchard

  3. 1962

    Polyethylene replaces maple

    Lasts were long made of hardwood, often maple. SATRA says the brittle plastics used after the Second World War gave way in the early 1960s to polyethylene, which was "used for the first time" then. Michael Bialy and Karl Friedrich Klebsch of Leslynn Products filed a US patent in June 1960 for last blocks of high-density polyethylene, granted in December 1962 as US 3,067,442. It gave the reasons for the change: rock maple was "in scarce supply" and expensive, and wooden lasts cracked on impact, warped with changes in moisture and deformed under repeated nailing. A patent filed in December 1975 by Arnold Cohen, assigned to Jones and Vining, states that the wood last had "for the most part been replaced" by high-density polyethylene.

    LessonCohen's patent says plastic lasts were still machined from a block "to match a wood model", so the copying method outlived the wood.

    patents.google.compatents.google.comsatra.com

    Credit

    Michael Bialy and Karl Friedrich Klebsch (Leslynn Products)

  4. 1979

    Patterns computed from the last

    The old method is set out in a Clarks Ltd patent. A tight plastic skin, the "drape", was formed on a model last. The stylist drew the style lines on it (the top edge of the shoe, the seams, the stitching lines). The drape was then cut off and flattened between rollers to give the flat pattern, and the flat pieces were scaled to grade them into other sizes. In the Clarks method (British priority 14 May 1979, European grant 1986), a computer works from 3D coordinates of the last and the style lines. It grades them by multiplying the last's length and girth, then flattens each size by unfolding strips of triangles into one plane. In 2004 the trade journal Shoe Intelligence reported that Clarks first built its Shoemaster software in-house in the 1980s. Torielli began selling it outside the Clarks group in 1990, and the software had more than 1,000 installations worldwide. SATRA dates computer-aided design (CAD) in shoemaking to the 1970s, when it was "primarily used for grading rather than design purposes".

    patents.google.comshoeintelligence.comsatra.com

    Credit

    Clarks Ltd (inventors Anthony Noel Darvill, Arthur Godfrey Flutter, Timothy Sean Moran, Michael Andrew Evans, Simon Treleon Stephen Stokes and Mark Easterfield); Torielli

  5. 2023

    A last for each buyer

    IAMBIC's Model T sneaker cost $550 and came in no sizes. The buyer sent photos of their feet and answered a comfort questionnaire. AI algorithms, developed with a National Science Foundation grant, then generated a plastic last for that one person, and a leather shoe was made by hand on it. That is how TIME described it in its list of the best inventions of 2023. IAMBIC now says its models are trained on 50,000 fit profiles (its own figure) and that each pair is handcrafted in Portugal and delivered in 4 weeks.

    LessonThe last, for centuries a stock form shared by every buyer of a size, became a file for one person, while building the shoe on it stayed handwork.

    time.comiambic.co

    Credit

    IAMBIC (chief executive Maeve Wang)

  6. 2024

    AI images start the design

    Nike showed 13 concept shoes in Paris on 11 April 2024. designboom reported that Nike's designers turned athletes' answers into prompts for image generators, which produced hundreds of pictures for each athlete. The designers then went "back to manual creative sketching for the technical specs" and 3D-printed the prototypes. The shoes were concepts, with no release or price given. In January 2025 Syntilay offered a slide at $149.99 a pair, 3D-printed to order. New Atlas reported that its basic shape came from Midjourney, a person sketched over it, and Vizcom AI turned the sketch into a 3D model.

    LessonIn both cases a person still drew the shoe that was made. A 2024 TU Delft master's thesis, written with the brand Filling Pieces, found AI shoe designs limited in "clarity, completeness, and production feasibility".

    designboom.comnewatlas.comrepository.tudelft.nl

    Credit

    Nike; Syntilay

Watch for

  1. Four-day shoe development at Anta

    Xinhua, China's state news agency, reported that designers at Anta's research centre in Jinjiang enter their main requirements into the "Linglong" design model and get dozens of concepts within minutes. Combined with a digital asset platform, this cuts the development of a running shoe from about a month to as little as 4 days. The report does not say who gave the 4-day figure. In the same report, Anta vice-president Li Ling said AI had taken part in the design of the group's sports shoes and equipment over the past two years.

    Achieved whenAnta or an outside party publishes development times across a whole season's range, not only the fastest case, and the shoes are on sale.

    news.cn

    Claimed by

    Anta, as reported by Xinhua, December 2025

  2. Shoes designed from gait scans

    Rebuilder AI, a Korean startup founded in 2021, says it has worked with ASICS since 2024. Its AI generates shoe designs from 3D scans of gait (the way a person walks), wear data, foot behaviour and ASICS's archives, and exports them as 3D files ready for production or 3D printing. Its designer Lewis Suaton said a design that took a week and a half can now give a first result in minutes or hours.

    Achieved whenASICS confirms a shoe on sale that was designed this way, and someone outside both companies reports its design time against ASICS's usual process.

    fashionunited.com

    Claimed by

    Rebuilder AI at VivaTech 2026, reported by FashionUnited, June 2026

  3. Fewer physical sample rounds

    Style3D, which sells 3D design software, says on its blog that digital samples cut the rounds of physical footwear samples from 4–6 to 1–2. It also says "TOP (Top of Production) validation remains essential" (a check of the first pairs off the production line), and that textured leathers such as nubuck still need a physical check by hand. It gives a 90%+ "correlation" target with no study behind it.

    Achieved whena brand or factory publishes sample-round counts for the same kinds of shoe before and after it adopted digital samples, checked by someone outside the vendor.

    style3d.com

    Claimed by

    Style3D, March 2026

Open

  1. 01

    Digital samples checked against real

    A published test of 20 shoe styles, each made twice from the same pattern files on the same last: once as a digital sample in 3D software and once as a physical sample. Each physical sample is 3D-scanned and compared with its digital twin, with the gap measured in millimetres. A panel of five designers is shown photos and renders in random order and judges which pairs match.

    The brief
    Credit · unclaimed
  2. 02

    An open library of lasts

    A free library of at least 200 lasts scanned in 3D. Each entry records maker, date, style, size and size system, and measurements taken to one published method: stick length, ball girth, waist girth, instep girth, heel height and toe spring (how far the toe curves up off the ground). It comes with a script that takes the same measurements from any scan. Released under CC BY 4.0.

    The brief
    Credit · unclaimed
  3. 03

    AI shoe concepts, built

    Ten written briefs, each run through three AI image tools to give 30 concepts. The images go unedited to an experienced pattern maker, who tries to pattern each one on one stock last, and samples are made of those that can be made. For each concept, publish whether it was made unchanged, made with changes (listed), or could not be made, and the hours it took.

    The brief
    Credit · unclaimed

Open 01 · the brief

Digital samples checked against real

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published test of 20 shoe styles, each made twice from the same pattern files on the same last: once as a digital sample in 3D software and once as a physical sample. Each physical sample is 3D-scanned and compared with its digital twin, with the gap measured in millimetres. A panel of five designers is shown photos and renders in random order and judges which pairs match.

Why it is still open

The figures in use come from sellers, with no published test behind them. Style3D claims fewer sample rounds and a 90%+ correlation target. An article in The Interline by a co-founder of DUO Design Studio, a digital-sampling studio, estimates that around 26 million physical footwear samples are made each year. That figure comes from the studio itself, with findings still to be published with Colorado State University, and the article names no brand with measured results. A search for studies comparing virtual footwear samples with physical prototypes found only work on garments.

style3d.comtheinterline.com

Built with what exists

A 3D footwear program that drapes pattern pieces on a digital last, such as Style3D's; one last in one size; a structured-light scanner such as a Revopoint or Shining 3D EinScan, or phone photogrammetry (building a 3D model from many photos) with Polycam; the free program CloudCompare to measure distances between the scan and the digital sample; a spreadsheet.

  1. First step

    Make one sneaker both ways on a single last and scan it.

  2. Done looks like

    20 styles in at least two materials (leather and a knit or mesh), each with a published deviation map and the median and 95th-percentile gap in millimetres, plus the panel's match rate.

Open 02 · the brief

An open library of lasts

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free library of at least 200 lasts scanned in 3D. Each entry records maker, date, style, size and size system, and measurements taken to one published method: stick length, ball girth, waist girth, instep girth, heel height and toe spring (how far the toe curves up off the ground). It comes with a script that takes the same measurements from any scan. Released under CC BY 4.0.

Why it is still open

Lasts sit with last makers, brands and museums. Public 3D files are single objects, such as a museum scan on Zenodo of one wooden last from the wreck of the Earl of Abergavenny, released under a non-commercial licence, or lasts sold as single files. Searches for an open dataset of 3D shoe-last scans, and for papers that release one, found none.

zenodo.org

Built with what exists

Phone photogrammetry (Polycam) or a desktop structured-light scanner; Python with trimesh or Open3D for the measurements; a classification model such as Gemini Decision 1 to sort each last by toe shape and heel-height class from photos (see the Note "A thousand questions, one pass"); a model that reviews the catalogue and flags entries whose recorded measurements disagree with the scan, for a person to check (see the Note "Seven more flagged").

  1. First step

    Borrow 20 lasts from a shoemaking school and scan them.

  2. Done looks like

    200 lasts from at least five sources (shoemaking schools, last makers, museums, second-hand dealers), every scan and measurement published, and 20 lasts scanned twice to report the measuring error in millimetres.

Open 03 · the brief

AI shoe concepts, built

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Ten written briefs, each run through three AI image tools to give 30 concepts. The images go unedited to an experienced pattern maker, who tries to pattern each one on one stock last, and samples are made of those that can be made. For each concept, publish whether it was made unchanged, made with changes (listed), or could not be made, and the hours it took.

Why it is still open

The 2024 TU Delft thesis found AI shoe designs limited in "production feasibility" and said they need technical drawings for the factory. Nike's team went back to hand sketching for the technical details. getimg.ai, one image tool, says it "does not export CAD or STL files, patterns, lasts, grading data or tech packs". A search for evaluations of how manufacturable AI-generated footwear designs are found expert ratings of images only, and no study that built the shoes.

repository.tudelft.nldesignboom.comgetimg.ai

Built with what exists

Image generators such as Midjourney and Vizcom, the tools Syntilay used, plus a third; one stock last; pattern card; a sample room or a shoemaking school's workshop; a spreadsheet.

  1. First step

    Write the ten briefs and generate the 30 images.

  2. Done looks like

    30 concepts with every image, pattern and sample photo published, and the tally of made unchanged, made with changes and not made, with hours for each.