BRENNEN

Industries / Technology / Telecommunications

Fiber optics

Fiber optics is the industry that makes glass optical fiber and fiber-optic cable, lays it underground, on poles and across the sea floor, and makes the lasers, receivers and test gear that send light through it and check that it works.

1977

Optical fiber began carrying live telephone traffic. By Bell Labs' account, AT&T's two 24-fiber cables under downtown Chicago carried their first commercial traffic on 1 April 1977 and took over fully on 11 May; Laser Focus World reports that GTE had a 6.3 Mbit/s fiber test running in Long Beach, California, on 22 April.

bitsavers.mirrorservice.orglaserfocusworld.com

38

Milestones achieved across 6 domains.

16

To watch for: announced, not yet confirmed outside.

14

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Glass fiber became clear enough to carry light for kilometers in 1970, the same year semiconductor lasers first ran continuously at room temperature. Bell Labs and NTT then found ways to make the glass rods that fiber is drawn from in bulk, by MCVD in 1974 and VAD in 1977, and fiber carried its first paying phone calls in Chicago and Long Beach in 1977. Light-based test gear, multi-fiber connectors and fiber sensors grew up alongside it.

Where it stands

Fiber carried 51% of fixed broadband subscriptions across OECD countries in the OECD's latest count, up from 31% in 2020, and fiber networks passed about 295 million homes in Europe by September 2025, by the FTTH Council Europe's count. AI data centers are now the fastest-growing buyers: TrendForce puts 2026 demand at 577 million fiber-km (one kilometer of one fiber), a shortfall of 180 million fiber-km, and spot prices at 2.8 to 5 times their 2025 levels. Lasers for data center optics are also short, and switch makers have begun to put the optics inside the switch chip's package.

What is open

Much of what the industry learns stays private: operators' fault traces and transceiver readings, makers' datasheets in incompatible formats, and price indexes sold to subscribers. Many of its records, from the highest fiber count in one cable to the first AI grading of connectors, rest on the maker's own test. AI models that read documents and write code, and open tools such as otdrs, OptiCommPy and DASCore, let a small team build the open datasets, benchmarks and bench prototypes that are missing.

Domains

AchievedWatch forOpen

Open in fiber optics

3 of 14 open deliverables

Open · Making fiber

One table for fiber specs

An open, machine-readable table of the published specifications of at least 40 single-mode fiber products from at least 8 makers, in the grades G.652.D, G.657.A1, G.657.A2 and G.654.E, with each value linked to the datasheet page it came from and each product checked against the limits of the ITU-T standard it claims to meet.

Built with what exists

The ITU-T G.652, G.654 and G.657 recommendations in their 08/24 editions; Python and pandas; a Claude-based document reviewer that pulls values out of PDFs and flags those that do not match the source or the standard (see the Note "Seven more flagged"). Language models that read tables in PDFs are what make this a one-person job.

Credit · unclaimed

Open · Cable and connectors

Open density table for cables

A public, cited table of high-fiber-count cables from many makers, recording fiber count, outer diameter, weight, minimum bend radius, maximum pulling load, ribbon type and rated duct size, with fibers per square millimeter computed so that "highest density" claims can be checked.

Built with what exists

Makers' public PDF datasheets; Python with pdfplumber; a CSV on GitHub checked with Frictionless Data; a Claude-based document reviewer to pull each field with a page citation for a person to check (see the Note "Seven more flagged").

Credit · unclaimed

Open · Laying and splicing

An open cable-blowing calculator

An open-source program that predicts how far a fiber cable will blow into a given duct route, and works backwards from a blowing test log to estimate the friction between cable and duct, including tests in which the cable stopped short of the end, and the "fill effect," in which the cable's own bulk changes how air pressure falls along the duct.

Built with what exists

The pushing-force and air-pressure equations printed in Griffioen and Jonker (2021); their rule of thumb that wiggles in a duct laid in a trench act like a bend of radius about 2,000 times the duct's inner diameter, about 16 m for a 10/8 mm microduct; the IEC 60794-1-21 Method E24 test route they cite; Python with SciPy. No new AI model is needed; the job is open because nobody has published the code.

Credit · unclaimed

Where it sits