Industries / Technology / Telecommunications / Fiber optics
Cable and connectors
Cable work wraps bare fibers into cables that survive ducts, poles, seabeds and crowded data halls, and makes the connectors and standards that join them.
5
Milestones achieved, from 1977 to 2021.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1977
Fibers packed in ribbons
Bell Labs laid 12 fibers side by side in a flat ribbon so that a whole group could be spliced, or joined, at once. It tested a 144-fiber ribbon cable in Atlanta in 1976, and the cables that carried the first commercial traffic in Chicago in 1977 held two ribbons, 24 fibers.
Lessonfibers pressed together in the ribbon lost extra light through microbending, tiny kinks in the glass; giving them room cut the added loss from 1.3 dB/km in Atlanta to 0.5 dB/km in Chicago, by Bell Labs' figures.
Credit
AT&T, Bell Laboratories, Western Electric and Illinois Bell
1996
Twelve fibers, one plug
A ferrule is the precise sleeve that holds fiber ends in line, and NTT's MT ferrule, developed in 1983, holds a whole row of them. NTT put an MPO (multi-fiber push-on) connector built on it into its network in 1991, and the IEC completed the MPO interface standard, IEC 1754-7, in November 1996. US Conec, founded in 1992, launched its MTP family of 4-, 8- and 12-fiber MPO-style connectors the same year.
Credit
NTT; IEC; US Conec
2003
No standard small connector
In the late 1990s several "small form factor" connectors, among them Lucent's LC and the MT-RJ, competed to replace the bulkier SC. The EIA/TIA decided not to standardize one, and in 2003 all six original styles were still on sale, though the industry appeared to be "settling on the MT-RJ and LC," Cabling Installation & Maintenance reported.
Lessonwhen a standards body declines to choose, buyers choose, and incompatible parts stay on sale for years.
Credit
Lucent (LC); EIA/TIA
2019
Rollable ribbon goes national
In a rollable ribbon the fibers are bonded only at spaced points, so the ribbon can curl into a tight bundle and still be spliced 12 at a time. Fujikura released a 6,912-fiber cable built this way in November 2018, and in September 2019 Openreach, the UK's main wholesale network, chose Fujikura's air-blown version for its underground ducts. Japanese makers began work on rollable ribbons in the early 2000s, according to an engineer at OFS, a rival maker.
Credit
Fujikura; Openreach
2021
Many fiber pairs share power
Undersea amplifiers, called repeaters, run on electricity sent from shore, and that power limits how many fibers a cable can light. Google and SubCom's 6,400 km Dunant cable used 12 fiber pairs, double the usual count by Lightwave's account, and shared the amplifiers' pump lasers between pairs; this is space-division multiplexing (SDM), more parallel paths instead of more data per path. Dunant was ready for service in February 2021 with 250 Tbps of capacity. In October 2025 Alcatel Submarine Networks and Unitirreno opened a 1,156 km Mediterranean cable with 24 fiber pairs and over 624 Tbps, and TeleGeography puts the ceiling at roughly 24 pairs because of "the difficulty in sending electricity across oceans."
Credit
Google and SubCom; Alcatel Submarine Networks and Unitirreno
Watch for
Cables with 13,824 fibers
Fujikura began selling a 13,824-fiber cable on 18 July 2025, double its earlier 6,912-fiber maximum, under 40 mm across. It calls it the world's highest count "by our own research" and says one is already installed at an overseas hyperscale data center. Lightera, Furukawa's brand, launched its own 13,824-fiber cable in April 2026, sized for 1.25-inch conduit.
Achieved whena named data center operator or an independent lab publishes the installed fiber count and measured loss, or an independent comparison confirms the density record.
Claimed by
Fujikura, July 2025; Furukawa (Lightera), April 2026
A cable plant for Meta
Corning and Meta agreed a multiyear deal worth up to $6 billion, under which Meta will buy fiber, cable and connection products from Corning and anchor an expansion of Corning's cable plant in Hickory, North Carolina. The expansion had begun by 31 March 2026, and a local agreement commits $170 million to $267.9 million and at least 132 jobs.
Achieved whenthe expanded plant is shipping cable and an outside party, such as the local authority checking the job and investment commitments, confirms its output.
Claimed by
Corning and Meta, February 2026
Smaller multi-fiber connectors
US Conec developed the MMC, a "very small form factor" multi-fiber connector, in 2021. On 17 February 2026 US Conec, Hakusan and Sanwa agreed to make interchangeable MMC parts and TMT ferrules in 12- and 16-fiber versions, and said the connector suits co-packaged optics, where the optics sit beside the switch chip.
Achieved whenIEC or TIA publishes an MMC interface standard, or an independent lab shows MMC parts from two makers mating within specification.
Claimed by
US Conec, Hakusan and Sanwa, February 2026
Open
01
Open density table for cables
A public, cited table of high-fiber-count cables from many makers, recording fiber count, outer diameter, weight, minimum bend radius, maximum pulling load, ribbon type and rated duct size, with fibers per square millimeter computed so that "highest density" claims can be checked.
The briefCredit · unclaimed02
Open tracker of cable capacity
An open, cited list of every public fiber, preform and cable capacity announcement since 2024, one row each: company, site, country, product, stated added capacity in the original units, a conversion to fiber-km per year with the assumptions written down, date, and status (announced, building, producing).
The briefCredit · unclaimed
Open 01 · the brief
Open density table for cables
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public, cited table of high-fiber-count cables from many makers, recording fiber count, outer diameter, weight, minimum bend radius, maximum pulling load, ribbon type and rated duct size, with fibers per square millimeter computed so that "highest density" claims can be checked.
Why it is still open
Record claims rest on the makers' own research; Fujikura footnotes its 13,824-fiber "world's highest" as "our own research, July 2025." GitHub repository searches on 19 November 2026 for "optical fiber cable specifications," "fiber optic cable datasheet dataset" and "high fiber count cable" returned nothing.
Built with what exists
Makers' public PDF datasheets; Python with pdfplumber; a CSV on GitHub checked with Frictionless Data; a Claude-based document reviewer to pull each field with a page citation for a person to check (see the Note "Seven more flagged").
First step
Collect the datasheets for every 3,456-, 6,912- and 13,824-fiber cable that Fujikura, Lightera, Corning, Prysmian and AFL list publicly, and compute the first ten densities.
Done looks like
At least 40 cables from at least 8 makers in at least 4 regions (Japan, the US, Europe, China and India), every number linked to a datasheet page, density recomputed by script, and a second person re-checking a random 10% of rows with no mismatches.
Open 02 · the brief
Open tracker of cable capacity
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open, cited list of every public fiber, preform and cable capacity announcement since 2024, one row each: company, site, country, product, stated added capacity in the original units, a conversion to fiber-km per year with the assumptions written down, date, and status (announced, building, producing).
Why it is still open
The shortage totals come from paid research, such as TrendForce's 180 million fiber-km, and company announcements use units that cannot be added up: Furukawa says it "more than doubles production capacity compared to fiscal year 2023," and Corning gives dollars and jobs. GitHub searches on 19 November 2026 for "optical fiber manufacturing capacity tracker" and "fiber optic shortage" returned nothing.
Built with what exists
Company newsrooms and stock exchange filings; a web agent to collect and archive the pages (see the Note "Deleting 80% to start over"); a spreadsheet; Python for the conversions.
First step
List the 2025 and 2026 capacity announcements in the newsrooms of Corning, Prysmian, CommScope, Fujikura, Sumitomo, Furukawa, YOFC, Hengtong, ZTT, STL and AFL.
Done looks like
At least 60 announcements from at least 15 companies in at least 6 countries, each with a live link and an archived copy, a quarterly total set beside TrendForce's shortfall, and 20 rows spot-checked by two outside reviewers.