Industries / Technology / Software and SaaS / Engineering design software
Chip and circuit design
Electronic design automation (EDA) is the software for designing chips and circuit boards: drawing the circuit, simulating it, laying out its shapes or copper, and checking the result against the factory's rules before anything is made.
4
Milestones achieved, from 1978 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1978
A layout file that stuck
In the 1970s chip layouts were drawn by hand, and full-time operators copied them into turnkey computer systems from Calma and Applicon, because the systems cost too much for designers to use themselves. By the end of the decade Calma's systems were in virtually all major chipmakers. Calma released its GDS (Graphic Data System) format in 1971 and GDS II in 1978, a binary file that records a chip's layout layer by layer. Both companies are long gone, but GDS II is still used for the data that photomasks are made from, and EDA vendors describe their tools as covering everything "from RTL to GDS II", by the account of the Semiconductor History Museum of Japan.
LessonA file format can outlive the company and the machines that made it.
Credit
Calma
1981
Design moves to workstations
Mentor Graphics was founded in Oregon in 1981, and in its first year two Silicon Valley start-ups, Daisy Systems and Valid Logic Systems, appeared with rival products; the computer press called the three DMV. All three sold computer-aided engineering for electronics: tools to draw and simulate circuits at a desktop workstation. Daisy and Valid built their own computers, while Mentor ran its software on workstations bought from Apollo Computer. In 1985 Daisy missed the deadline for its next computer while Mentor's Apollo machines kept improving, and by mid-1988 Mentor held about a fourth of a $900 million market against Daisy's 12%, by the International Directory of Company Histories' account. Daisy was later merged into Cadnetix, and Valid was bought by Cadence in 1991.
LessonThe vendors that tied their software to their own hardware lost to the one that ran on general-purpose machines.
Credit
Tom Bruggere, Gerry Langeler and Dave Moffenbeier, founders of Mentor Graphics
2017
Electronics joins mechanical design
Siemens closed its purchase of Mentor Graphics in March 2017, adding chip and board design software to the mechanical design, test and simulation software it had bought since 2007 from companies such as UGS, LMS and CD-adapco, about $10 billion of purchases by Siemens's count. Mentor later became Siemens EDA, which Business Standard counts with Synopsys and Cadence as the world's three largest EDA firms.
electronicdesign.compress.siemens.comcompany-histories.combusiness-standard.com
Credit
Siemens; Mentor Graphics
2025
Export curbs, then reversal
In late May 2025 the US Commerce Department sent letters to Synopsys, Cadence and Siemens that blocked sales of EDA tools to China, in a dispute over China's curbs on exports of rare earth minerals. Tom's Hardware reported that the letters gave almost no guidance on what remained allowed, so the companies stopped nearly all their work there. On 2 July 2025, after a trade deal, the restrictions were rescinded "effective immediately", in Synopsys's words, and all three began restoring access. Business Standard reported, citing the South China Morning Post, that the three hold more than 80% of China's EDA market.
LessonDesign software can be cut off by a government letter overnight, and Tom's Hardware noted that the episode gave Chinese chipmakers reason to seek local tools.
Credit
US Department of Commerce, Bureau of Industry and Security
Watch for
Domestic tools at HiSilicon
HiSilicon, Huawei's chip design arm, says the number of kinds of Chinese EDA tools it uses at scale rose from 17 in 2025 to 26 in 2026, and that it used a homegrown toolset, "τ EDA V0.1", for its first logic-folding chip project, a design that stacks circuitry vertically. The figures come from its chief information officer, Diao Yanqiu, as reported by EE Times China and then TrendForce. In May 2026 Tom's Hardware wrote that Chinese EDA companies such as Empyrean and Primarius had made progress in analog, mixed-signal and physical verification tools but that none offered a full digital design flow competitive with Western ones at advanced nodes.
Achieved whenan outside party, such as a chip analysis firm or a named customer of the tool makers, confirms that a shipping chip was designed with Chinese tools across the whole flow and names the tools.
Claimed by
HiSilicon, September 2026
Open
01
Real board bugs, with answers
A public set of real mistakes found in open-source circuit board designs. Each item holds the KiCad files from before the fix, the fix itself, and a short written answer saying what was wrong, confirmed by two people. Then score automatic reviewers on it, from KiCad's own electrical rule check (ERC, which finds faults such as unconnected pins) and design rule check (DRC, which checks spacing and widths on the board) to AI reviewers, by how many real mistakes each finds and how many false alarms it raises.
The briefCredit · unclaimed02
Two rule checkers, one rulebook
A DRC for a chip checks a layout against the factory's geometric rules, such as minimum widths and spacings, using a rule deck written for each checking program. IHP's SG13G2 design kit, a free kit for a real 130 nm process at IHP in Germany, can be checked by two open programs, KLayout and Magic, each with its own deck. Build a test that runs both on the same layouts and lists every rule where they disagree with each other or with the kit's written rule document.
The briefCredit · unclaimed
Open 01 · the brief
Real board bugs, with answers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of real mistakes found in open-source circuit board designs. Each item holds the KiCad files from before the fix, the fix itself, and a short written answer saying what was wrong, confirmed by two people. Then score automatic reviewers on it, from KiCad's own electrical rule check (ERC, which finds faults such as unconnected pins) and design rule check (DRC, which checks spacing and widths on the board) to AI reviewers, by how many real mistakes each finds and how many false alarms it raises.
Why it is still open
The authors of PCBInnoBench (NeurIPS 2026) write that board design lacks such tests "largely because open-source PCB projects rarely provide the structured issue/PR/test histories that existing benchmarks rely on", so its 372 tasks were written by experts. EDA Bench (ICML 2026) grades agents that rebuild 35 open designs, where the best scored 4.58%, rather than agents that find mistakes in existing ones. The kicad-happy test harness runs AI reviews over real open projects, but to catch regressions in one tool.
Built with what exists
public KiCad projects on GitHub and their revision notes; KiCad's command-line ERC and DRC; the kicad-happy harness as a starting point; AI reviewers such as Claude Fable 5.2 (Note: "Three working devices") and a small open model fine-tuned on one GPU (Note: "One GPU to fine-tune").
First step
Find 20 open KiCad boards with a published second revision, and list each change their makers say fixed a mistake, with the commit that made it.
Done looks like
at least 100 confirmed mistakes from at least 30 projects, each checked by two people; for each reviewer, the share of mistakes found and the false alarms per board, over at least five runs; the set and the scoring script published.
Open 02 · the brief
Two rule checkers, one rulebook
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A DRC for a chip checks a layout against the factory's geometric rules, such as minimum widths and spacings, using a rule deck written for each checking program. IHP's SG13G2 design kit, a free kit for a real 130 nm process at IHP in Germany, can be checked by two open programs, KLayout and Magic, each with its own deck. Build a test that runs both on the same layouts and lists every rule where they disagree with each other or with the kit's written rule document.
Why it is still open
In April 2026 a user reported a layout with 8 violations of rule M1.e that KLayout passed as clean and Magic flagged; the report was still open in November 2026. The KLayout deck has its own regression tests with expected results, but no published rule-by-rule comparison of the two decks was found.
Built with what exists
the IHP-Open-PDK repository, which ships setups for both KLayout and Magic; KLayout's DRC engine and Python interface; Magic; the KLayout deck's regression test cases; public layouts of open designs; a coding agent such as Inkling 2 Small (Note: "Checked without being asked") to draft one passing and one failing test layout per rule.
First step
Run Magic on the KLayout deck's regression test cases and compare its verdicts with the expected results.
Done looks like
every rule in the SG13G2 rule document with at least one passing and one failing test layout; both decks run on all of them and on at least 50 public designs; a public table of agreements and disagreements; each disagreement filed with the kit's maintainers with its test layout, and a count of how many were fixed three months later.