Industries / Technology / Software and SaaS / Engineering design software
Design data and file exchange
Design data work keeps every version of every model and drawing in order, and moves them between programs and companies without losing their shape or their meaning.
6
Milestones achieved, from 1980 to 2015.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1980
A neutral exchange format
A neutral format lets each design program write and read one shared file type, instead of needing a separate translator for every pair of programs. The US National Bureau of Standards (NBS, now NIST) published the Initial Graphics Exchange Specification (IGES) version 1.0 in March 1980, after "a three month intensive effort" by a committee of Roger N. Nagel of NBS, Walt W. Braithwaite of Boeing and Philip R. Kennicott of General Electric, under contract to the US Air Force, Army, Navy and NASA. When PTC's Pro/ENGINEER shipped in 1988, its basic package included IGES 3.0 (Weisberg), and a 1999 study for NIST found that neutral formats such as IGES and DXF "have been very successful in some limited applications, but they have a number of weaknesses".
Credit
Roger N. Nagel (NBS), Walt W. Braithwaite (Boeing), Philip R. Kennicott (General Electric)
1994
One international exchange standard
The first exchange formats were national: SET in France, VDAFS in Germany and IGES in the United States. An effort under the International Organization for Standardization (ISO) then produced STEP, the Standard for the Exchange of Product model data, numbered ISO 10303, whose overview part was published in 1994. NIST served as STEP's first secretariat in the 1990s and now calls it "broadly used for sharing engineering and manufacturing data within organizations and across supply chains". STEP Tools, a company that sells STEP software, says nearly every major CAD system reads and writes it, and that AP242, a version for 3D models with tolerances published in 2014, replaces the two older versions used for CAD files.
Credit
ISO technical committee 184, subcommittee 4; NIST
1999
Incompatibility gets a price
A March 1999 study by Smita Brunnermeier and Sheila Martin of the Research Triangle Institute, written for NIST, estimated that "imperfect interoperability imposes at least $1 billion per year on the members of the U.S. automotive supply chain". By far the largest part was the work of "repairing or reentering data files that are not usable for downstream applications". The authors called the figure conservative because some costs could not be measured.
Credit
Smita B. Brunnermeier and Sheila A. Martin, Research Triangle Institute; NIST
2006
Two versions, one airliner
In October 2006 Airbus said the A380 superjumbo would be late again because the work to install electrical harnesses in the front and rear fuselage had been underestimated. Its statement gave the root cause as a 3D digital mock-up, the shared computer model used to design the harness routes, that "was implemented late" while the people using it "were still in the learning curve". The Chicago Tribune reported in December 2006 that engineers in Germany had kept working in CATIA 4 after the company asked every site to use CATIA 5, and quoted Airbus production head Tom Williams: the plane has 98,000 wires and 40,000 connectors, and its 500,000 design models "must be kept in sync by mismatched computer-design systems". The two accounts stress different causes.
Lessonwhen sites on one program work in different versions of a design system, the mismatch can stay hidden until parts fail to fit on the assembly line.
Credit
Airbus, under chief executive Christian Streiff
2015
Models without files
Most CAD programs save each part as a file that people copy, email and check in and out. Onshape, started by former SolidWorks leaders including Jon Hirschtick and John McEleney, launched in 2015 a CAD program that runs entirely in a web browser and keeps the computing, data management, file storage and version control in the cloud (Digital Engineering). In October 2019 PTC agreed to buy Onshape for $470 million; PTC described it as "the first Software as a Service (SaaS) product development platform" combining CAD with data management, a "first" that is PTC's claim.
Credit
Jon Hirschtick, John McEleney and the other Onshape founders; PTC
2015
Tolerances tested in public
Product and manufacturing information (PMI) is the dimensions, tolerances and notes attached to a 3D model, so that the model can stand in for the drawing; geometric dimensioning and tolerancing (GD&T) is its standard symbol language. NIST's MBE PMI Validation and Conformance Testing Project, which ended in 2015, modeled test parts carrying GD&T in four major CAD systems and recorded the errors in how each stored and displayed them. NIST's write-up says that before this "there has never been any rigorous public-domain testing of CAD software GD&T implementations". The test parts, CAD models and STEP files may be used "without any restrictions", and the CAx Implementor Forum, where CAD vendors test their STEP translators, uses them for STEP AP242.
Credit
NIST, including Robert R. Lipman and James J. Filliben; Doug Cheney and Bryan Fischer, authors of the 2015 test reports
Watch for
Exact solids in USD files
OpenUSD is a file format for 3D scenes used in graphics and simulation. A boundary representation (B-rep) is how CAD stores a solid: its exact curved faces, and the edges and corners that join them. NVIDIA released USD BRep 1.0.0 on 8 October 2026 under the Apache 2.0 licence: a schema that stores B-rep solids in USD "with their full topology and NURBS or analytic geometry" (NURBS are the standard curves and surfaces of CAD; analytic geometry means exact planes, cylinders, cones, spheres and tori), a validator, converters to and from Open CASCADE, and SMLib, a solid-modeling kernel that AlphaSignal reports is based on a NURBS library used in commercial CAD for decades. The repository links a written proposal for the schema.
Achieved whenthe schema is accepted into OpenUSD itself, or a design program from another company reads and writes it and an outside test shows solids surviving the round trip.
Claimed by
NVIDIA, October 2026
Open
01
Drawings checked against models
A program that reads a part's PDF drawing, pulls out every dimension, tolerance and datum callout, and checks each one against the machine-readable tolerances (semantic PMI) in the same part's STEP AP242 file. It lists every callout that disagrees, is missing from one side, or appears only on the other. The two often travel together, and NIST's own test drawings state that dimensions defined on the drawing "take precedence over dimensional data defined by the model", so a disagreement decides what the shop makes.
The briefCredit · unclaimed02
Tolerances through free tools
A public table of what happens to the tolerances in NIST's STEP AP242 test files when free and open-source software reads and writes them: Open CASCADE's STEP reader and writer, FreeCAD's import and export, and USD BRep's Open CASCADE converters. For each file and tool it counts how many dimensions, tolerances and datums arrive with their values, and still linked to the right faces.
The briefCredit · unclaimed
Open 01 · the brief
Drawings checked against models
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A program that reads a part's PDF drawing, pulls out every dimension, tolerance and datum callout, and checks each one against the machine-readable tolerances (semantic PMI) in the same part's STEP AP242 file. It lists every callout that disagrees, is missing from one side, or appears only on the other. The two often travel together, and NIST's own test drawings state that dimensions defined on the drawing "take precedence over dimensional data defined by the model", so a disagreement decides what the shop makes.
Why it is still open
The commercial checkers found for this file compare one model with its translated copy, or one drawing revision with the next, using data drawn from the CAD system itself (Elysium's CAD Validator and Drawing Validator). TriView2CAD, a 2025 research benchmark of 3,000 real-world drawings, tests whether AI models can reason about dimensions in drawings, not whether a drawing matches its model. No tool that reads a PDF drawing and checks it against STEP PMI turned up in a search.
Built with what exists
NIST's eleven test parts (CTC 1 to 5 and FTC 6 to 11) and its simplified STC versions, each with a PDF drawing and STEP AP242 files carrying semantic PMI; NIST's free STEP File Analyzer, which reports a file's semantic PMI; Open CASCADE's data exchange layer, which reads GD&T from STEP; a PDF text extractor such as pdftotext for drawings saved as vectors; and, for scanned drawings, a model that reads images and text, such as Liquid AI's LFM3 fine-tuned on one GPU (see the Note "One GPU to fine-tune") or Meta's Muse Ember for long-document extraction (see the Note "The jobs agents repeat").
First step
download NIST's FTC-08 drawing and its STEP AP242 file, list the file's callouts from a STEP File Analyzer report, extract the drawing's text with pdftotext, and match the two by hand for one view.
Done looks like
on copies of all NIST test parts seeded with 100 deliberate errors (changed values, swapped datums, deleted callouts), the checker finds at least 95 of them with no more than 5 false alarms; the seeded files, the answer key and the code published.
Open 02 · the brief
Tolerances through free tools
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of what happens to the tolerances in NIST's STEP AP242 test files when free and open-source software reads and writes them: Open CASCADE's STEP reader and writer, FreeCAD's import and export, and USD BRep's Open CASCADE converters. For each file and tool it counts how many dimensions, tolerances and datums arrive with their values, and still linked to the right faces.
Why it is still open
NIST's 2015 tests and the AP242 benchmarks run by the French and German industry groups AFNeT and prostep ivip measured commercial CAD systems. Open CASCADE's documentation says it can read and write GD&T, but in a 2022 exchange on its forum a developer reported one dimension "skipped via step import" and support for tolerances attached to supplemental geometry still "on testing stage". No published results for free tools turned up.
Built with what exists
NIST's STEP AP242 test files; NIST's STEP File Analyzer, which counts semantic PMI and checks it against the CAx Implementor Forum's recommended practices; Open CASCADE; FreeCAD 1.x; USD BRep; a coding agent such as Inkling 2 Small (see the Note "Checked without being asked") to script the runs and compare the reports.
First step
run the STEP File Analyzer on one FTC AP242 file, read and rewrite the file with Open CASCADE's STEP writer, analyze the new file, and compare the two reports.
Done looks like
every NIST CTC, FTC and STC AP242 file passed through at least three free tools; before-and-after counts of each kind of PMI published with the scripts; each loss filed as a bug report with the project concerned.