Industries / Technology / Software and SaaS / Engineering design software
Building models
Building models are the programs and rules for describing a building as a 3D model whose parts carry data, such as size, material and fire rating, and for passing that data between firms and on to the owner.
5
Milestones achieved, from 1994 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1994
Rivals agree to share
In 1994 Autodesk invited 11 other US companies, among them AT&T, Carrier, Honeywell, the architects HOK, Primavera Systems and Timberline Software, to advise on a shared set of software building blocks so that design programs could exchange building data. The group opened membership to anyone in September 1995, was renamed the International Alliance for Interoperability (IAI) in May 1996 by Wikipedia's account (1997 by Designing Buildings'), and became buildingSMART in 2005. Its format, IFC (Industry Foundation Classes), for passing building models between programs from different makers, has been an ISO standard, ISO 16739, since 2013. Designing Buildings notes that IFC "does not itself guarantee interoperability".
LessonWikipedia says the format was opened up because Autodesk's own users insisted it should not belong to one company; a shared format spread once no single vendor owned it.
Credit
Autodesk and its 11 co-founders
2003
A landlord asks for models
The US General Services Administration (GSA), which calls itself the government's landlord, launched its National 3D-4D-BIM Program in July 2003; "4D" adds the construction schedule to the 3D model. For every major project receiving design funding in fiscal 2007 and after, GSA required a "spatial program BIM", a model from which reviewers check room areas against the brief, before the final concept could be approved, by the program's own description reported in Geo Week News. FMLink reported in 2007 that GSA had used these methods on over 60 capital projects since 2003.
Credit
GSA Public Buildings Service, Office of the Chief Architect
2004
Owners pay for lost data
A study prepared for the US National Institute of Standards and Technology (NIST) by RTI International and the Logistics Management Institute estimated that inadequate interoperability, meaning software and paper records that do not pass information cleanly between firms and through a building's life, cost the US capital facilities industry $15.8 billion in 2002. Two-thirds of that fell on owners and operators, mostly while running and maintaining their buildings, and the authors call the figure likely conservative.
LessonMost of the cost of information lost between programs lands on the owner after the designers have gone.
Credit
Michael Gallaher, Alan O'Connor, John Dettbarn Jr. and Linda Gilday
2018
Information rules go international
ISO 19650, parts 1 and 2 of which carry the year 2018, sets out how a building's information is managed among everyone involved: how it is exchanged, recorded, versioned and organized over the building's whole life, from planning to end of life. By the account of BSI, the UK standards body, it is based on the UK's BS 1192:2007 and PAS 1192-2:2013, which it replaced; it was adopted as a European standard, and BSI published its British edition on 31 January 2019. BSI notes that the UK documents had been free to download under government sponsorship, while ISO standards are sold.
Credit
ISO, building on British Standard BS 1192 and PAS 1192-2
2024
Requirements a computer can check
IDS (Information Delivery Specification) is a file format, written in XML, in which a client states what a delivered model must contain, for example that every door carries a fire rating, so that software can check an IFC model against it automatically. buildingSMART published IDS 1.0 as a final standard on 3 June 2024, "as approved by the Standards Committee Executive, after a unanimous positive voting result". Free tools outside buildingSMART already run it, such as the browser-based IFC model checker listed by opensource.construction.
Credit
buildingSMART International; user requirements stage led by Cyrille Pennavaire, development stage by Robin Drogemuller
Watch for
Permits checked from model data
Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT) has accepted drawings produced from building models in applications for building confirmation, Japan's building permit, since April 2026, while reviewers still check the drawings. On 18 September 2026 it published a basic plan for the next stage, from spring 2029, in which reviewers check the IFC model data itself through a shared online store, starting with items such as floor area ratio, site coverage, wall setbacks and height limits. Fully automated review that bypasses the reviewer's judgement, including by generative AI, is excluded for now.
Achieved whena building confirmation in Japan is issued on the strength of a checked IFC model rather than drawings.
Claimed by
MLIT, September 2026 (reported by The Good Builder, October 2026)
Open
01
What survives IFC export
A written modelling script for one small test building (walls with layered materials, floor slabs, doors, windows, a stair and named rooms), listing every expected name, material, layer thickness and property. The same building is modelled from the script in at least five design programs, each program's IFC export is checked against one IDS file written from the script, and the result is a public table of what each program delivered intact.
The briefCredit · unclaimed02
An answer key for Japan
A public set of IFC models of small buildings on defined plots, each with its building coverage ratio (built footprint over plot area), floor area ratio (total floor area over plot area) and greatest height worked out by hand, plus planted breaches of the limits and a scoring script, so any checker for Japan's coming model-based permit review can be measured on the same files. The test compares numbers only; it approves nothing.
The briefCredit · unclaimed
Open 01 · the brief
What survives IFC export
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A written modelling script for one small test building (walls with layered materials, floor slabs, doors, windows, a stair and named rooms), listing every expected name, material, layer thickness and property. The same building is modelled from the script in at least five design programs, each program's IFC export is checked against one IDS file written from the script, and the result is a public table of what each program delivered intact.
Why it is still open
The closest study, by Meray Nassimos, Megan De Prins, Aurélie Jeunejean and Pierre Leclercq (SHS Web of Conferences, October 2024), built identical projects in only two programs, Revit and ArchiCAD, and checked only the material data of walls. buildingSMART's own validation service checks a file's syntax, its schema and a set of written rules, which tells whether a file is well formed, not whether the author's data survived.
Built with what exists
IDS 1.0 and IfcTester, the IDS checker in the open-source IfcOpenShell project; buildingSMART's validation service, whose code is public and runs locally; the design programs' own IFC exporters, such as Revit, Archicad, Vectorworks and the free Bonsai (student licenses cover the commercial ones); an AI coding agent to turn the script into the IDS file and the comparison report, such as Inkling 2 Small (see the Note "Checked without being asked"), or Ishigaki-IDS, an open-weight model trained to draft IDS files (under Watch for in AI-assisted design).
First step
Write the script for one room with ten elements, model it in Bonsai and one commercial program, export both, and run IfcTester on each against an IDS written from the script.
Done looks like
The building modelled in at least five programs by people working from the script alone; exports in IFC4 and IFC2x3 where offered; at least 300 checked facts per export; a public table of each program's share of facts delivered intact, with the script, the IDS file, the IFC files and the export settings published so anyone can rerun it.
Open 02 · the brief
An answer key for Japan
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of IFC models of small buildings on defined plots, each with its building coverage ratio (built footprint over plot area), floor area ratio (total floor area over plot area) and greatest height worked out by hand, plus planted breaches of the limits and a scoring script, so any checker for Japan's coming model-based permit review can be measured on the same files. The test compares numbers only; it approves nothing.
Why it is still open
MLIT plans to check permit applications against IFC model data from spring 2029, with floor area ratio, site coverage, wall setbacks and height limits high on its list. Searches in November 2026 found no published test set or open rule set for these Japanese checks; the open checkers found, such as the opensource.construction IFC model checker, test a model's structure and its IDS requirements, not zoning limits.
Built with what exists
Bonsai and IfcOpenShell to model the buildings and measure areas and heights; an IDS file that requires each model to carry its plot area and zoning district; the coverage and floor area limits a municipality sets for each zoning district; an AI coding agent to write the measuring scripts and their tests (see the Note "Checked without being asked"), run many times to confirm it returns the same numbers each time (see the Note "All twenty times").
First step
Model one two-storey house on a rectangular plot in Bonsai, work out its two ratios by hand, and compare them with the output of a short IfcOpenShell script.
Done looks like
At least 40 models, half detached houses and half small offices, 10 of them with planted breaches; each value worked out by two people apart, following Japan's own counting rules, and agreeing within 0.5%; a published table scoring at least two checkers on the share of values within 0.5% of the hand value and the share of planted breaches caught.