BRENNEN

Industries / Food, farming and forestry / Agriculture and farming

Cotton ginning

Cotton ginning pulls the fiber of picked cotton off its seed, cleans it and presses it into graded, tagged bales for spinning mills, and sends the seed on to oil mills, feed and planting.

c. 500 CE

The single-roller gin, a rod rolled over seed cotton on a flat stone or board to squeeze out the seed, was in use by at least the fifth century, according to USDA ginning researchers citing the historian Angela Lakwete.

cotton.org

40

Milestones achieved across 6 domains.

7

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

By at least the fifth century, people freed cotton fiber from its seed by rolling a rod over it on a flat stone, and roller gins did the work for centuries. In 1796 Hodgen Holmes patented a saw gin that ran without stopping, and saws still gin Upland cotton, most of the world's crop. In 1900 the United States alone had 29,214 gins, averaging 320 bales each.

Where it stands

The International Cotton Advisory Committee (ICAC) estimates world lint output at 26 million tonnes in the 2025/26 season, led by China, India and Brazil (). The United States had 419 active gins in 2025, down from 446 a year earlier; every US bale carries a 12-digit tag, and instruments measure a sample from each one. Plastic from module wrap and field litter is the contaminant that gins, classers and mills now work hardest to keep out of the lint.

What is open

Many open jobs are measurements nobody has collected or shared: counts of contamination per kilogram instead of mills' opinions, a full season linking modules to bales and grades, and a map of the world's gins. Cameras and small AI models make it practical to code extraneous matter, grade bale wrapping and screen seed for aflatoxin from images, and a handheld scanner could check gossypol in seed and meal.

Domains

AchievedWatch forOpen

Advances to build with

1 research note

Open in cotton ginning

3 of 12 open deliverables

Open · Drying and cleaning

One table of cleaning trials

An open table of every published test of how gin dryers, seed-cotton cleaners and lint cleaners change cotton: one row per machine stage per test, with machine type, settings, cotton type, moisture, and the measured change in fiber length, uniformity, neps (small fiber knots), trash and lint lost, each row linked to the page it came from.

Built with what exists

The Journal of Cotton Science archive and Beltwide Cotton Conferences proceedings, both free on cotton.org; pdftotext; a low-cost AI model run over every paper to pull numbers out of tables (see the Note "The jobs agents repeat"); Python and pandas; Zenodo for hosting.

Credit · unclaimed

Open · Ginning

Map the world's gins

An open map of active cotton gins worldwide, giving each gin's name, location, country, gin type (saw or roller) where known, and the public source for every entry.

Built with what exists

NASS county tables as a completeness check; public directories of ginner associations and government programs; satellite imagery, where gins show as module yards and bale stacks; QGIS; a low-cost AI model that reads directory pages and fills in fields (see the Note "The jobs agents repeat").

Credit · unclaimed

Open · Baling

Grade bale wrapping from photos

A phone app that photographs a bale's sides and ends as it arrives at a warehouse or mill and sorts it into the JCIBPC's Grade A, Grade B or Other, naming the defect it sees: torn bagging, exposed or dirty lint, open ends, ties not sunk into the bale, wire knots on a flat side, rust, oil, or a missing bale tag.

Built with what exists

Phone cameras; open object-detection and segmentation models such as Ultralytics YOLO or Meta's Segment Anything; Label Studio for labeling; the JCIBPC guide's photographs as the reference set.

Credit · unclaimed

Where it sits