BRENNEN

Industries / Technology / Electronics and semiconductors / Contract electronics manufacturing

Factory automation

This work lets a factory's machines run, pass work along and report what they are doing with fewer people, from robot arms to the data standards that link one machine to the next.

4

Milestones achieved, from 1984 to 2019.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1984

    A robot Mac factory

    Apple opened a Macintosh plant in Fremont, California, which a Fremont City Council agenda called one of the "nation's most automated plants", with robots, parts delivered just in time and a line built to turn out a Mac every 27 seconds. It never reached the volume planned; Jean-Louis Gassée, who worked a shift there in 1988, found parts falling off the line, and the plant closed in 1992.

    Lessonautomation built for a volume that never comes does not pay, and Apple later left its assembly to contract factories in Asia.

    thenextweb.combdnews24.com

    Credit

    Steve Jobs; Apple

  2. 2011

    A million robots promised

    In July 2011 Foxconn's chief executive Terry Gou told staff the company would rely more on robots, and local media reported a plan for 1 million robots within three years, when it used about 10,000. In October 2016 a Foxconn executive said it had installed 40,000 of its "Foxbots" in China and was making about 10,000 a year.

    Lessonrobot arms replaced hand work in electronics assembly far more slowly than promised.

    computerworld.comappleinsider.com

    Credit

    Foxconn; Terry Gou

  3. 2017

    Boards carry their own data

    Machines in a surface-mount line hand each board to the next machine, and SMEMA, an interface from the late 1990s, was the first common way to do it. The Hermes Standard, released as version 1.0 in April 2017 by a group of equipment makers and published by IPC as IPC-HERMES-9852, also passes each board's ID, size and program name down the line over an ordinary network connection, so machines can change over for mixed products without scanning each board again. IPC says more than 60 makers take part.

    the-hermes-standard.infoipc.org

    Credit

    The Hermes Standard Initiative; IPC

  4. 2019

    One data language for machines

    In April 2019 IPC, the electronics manufacturing trade association, released IPC-2591, Connected Factory Exchange (CFX): a fixed set of messages, written as JSON and sent over the AMQP messaging protocol, in which every machine on a line reports what it is doing to the others and to factory software, with a free, open-source software kit. IPC has revised it through version 2.0 in March 2025 and keeps a list of machines qualified to it.

    electronics.orgipc.org

    Credit

    IPC's CFX committee

Watch for

  1. Agents from alarm to report

    NVIDIA's Factory Operations Blueprint, FOX, is a reference design for AI agents on top of a plant's existing systems. In its surface-mount example, when an inspection camera flags a board, one agent checks the image, a robot takes the board to rework and a root-cause agent searches machine data such as reflow oven temperatures and writes a report; it runs in NVIDIA's OpenShell sandbox (see the Note "Stopped in milliseconds"). For Siemens' electronics factory in Erlangen, NVIDIA reports order-planning savings of up to 20% from agents built on FOX and a 40% cut in inspection calibration time from related Siemens tools, results the analysis site Infraday calls vendor-reported.

    Achieved whena plant outside the two companies publishes measured results from using the agents in production.

    marketscale.com

    Claimed by

    NVIDIA and Siemens, October 2026

Open

  1. 01

    Explain why the line stopped

    An open set of machine messages recorded in the IPC-CFX format from a working surface-mount line over several weeks, with every stop labeled with its cause by the technician who cleared it, and a public score of how often AI models name the right cause from the messages alone.

    The brief
    Credit · unclaimed
  2. 02

    Robot loads component reels

    A low-cost robot arm that loads 8 mm component tape into the open-hardware feeders of the LumenPnP, an open-source pick-and-place machine, so that the feeder advances and presents its first part at the pickup window.

    The brief
    Credit · unclaimed

Open 01 · the brief

Explain why the line stopped

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open set of machine messages recorded in the IPC-CFX format from a working surface-mount line over several weeks, with every stop labeled with its cause by the technician who cleared it, and a public score of how often AI models name the right cause from the messages alone.

Why it is still open

The CFX standard and its software kit are free, and IPC's CFX Recorder saves a line's messages to a local file, but searches of Hugging Face and GitHub found no public CFX recordings. NVIDIA's FOX shows a root-cause agent on a surface-mount line only as a reference example, and its one set of factory figures is vendor-reported.

github.commarketscale.com

Built with what exists

IPC's CFX software kit and CFX Recorder; RabbitMQ, an open-source message broker; a university or small contract-manufacturer line whose machines speak CFX; AI models through their APIs or run locally; NVIDIA's FOX code as one baseline.

  1. First step

    Find a line owner willing to share data, run CFX Recorder for one week, and draw up the list of stop causes with the line's technicians.

  2. Done looks like

    at least four weeks of messages from one line, with at least 100 labeled stops across at least 10 causes; at least three models scored on how often their first answer, and their top three, contain the right cause; the data released with customer and part names removed.

Open 02 · the brief

Robot loads component reels

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A low-cost robot arm that loads 8 mm component tape into the open-hardware feeders of the LumenPnP, an open-source pick-and-place machine, so that the feeder advances and presents its first part at the pickup window.

Why it is still open

Fuji's June 2026 station is a dedicated machine for its own line, and Fuji says kitting has been "heavily dependent on manual labor". For the LumenPnP, Opulo's feeder loading station only powers a feeder while a person loads the tape.

pcbdirectory.comgithub.com

Built with what exists

an SO-101 arm with LeRobot (Note: "No download"); Opulo's Photon feeders and feeder loading station, from its open repositories, on their low-voltage 24 V supply; a USB camera over the pickup window; reels of low-cost resistors.

  1. First step

    Record 50 remote-controlled loads with one feeder and one tape type, and write the camera check.

  2. Done looks like

    50 consecutive filmed loads with a public tally; a load counts only if the feeder advances on command and the camera sees a part in the pocket at the pickup window; code and training data public.