Industries / Transport and vehicles / Automotive / Collision repair
Panels
Panel work repairs or replaces the outer skin of a car, its doors, fenders, hood, roof and bumper covers, which carry little of the crash load but must look and fit like new.
4
Milestones achieved, from 1955 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1955
Plastic filler replaces lead
Before plastic filler, dents were metal-finished by hand or filled with lead, which needed a torch, acid and paddles and practiced skill. Polyester filler, a resin mixed with a hardener and a powder such as talc, "emerged on the scene around 1955", and Bondo, one of hundreds of makers, gave the product its common name.
LessonWest writes that filler made dent work easy to attempt, so those "who would pile on lead an inch deep became the new abusers of plastic filler".
Credit
Bondo and other filler makers, by the account of Seattle shop owner Mike West in BodyShop Business (2002)
1960
Dents pushed out from behind
Oskar Flaig looked after the paint on Mercedes-Benz show cars. At the International Motor Sports Show in New York in February 1960 he pressed out a small dent with a hammer handle so it would need less filler, and the panel looked perfect without repainting. Back in Sindelfingen he made tools from spring steel, trained staff and later taught the method, now called paintless dent repair, at Mercedes plants in the United States and England.
Credit
Oskar Flaig, Mercedes-Benz, by the account of the tool maker Nüssle Spezialwerkzeuge
1982
Bumpers allowed to dent again
For 1980 to 1982 models, US rules required bumpers to survive 5 mph barrier impacts with no damage beyond a 3/8 inch dent. A rule of 14 May 1982, effective with 1983 models, cut the test speed to 2.5 mph and allowed damage to the bumper itself. NHTSA's own 1987 evaluation found that costs to owners had not changed: a small rise in repair costs over a car's life was offset by cheaper bumpers.
LessonA bumper rule trades the price of the bumper against the repairs it saves, and NHTSA's count found the two cancelled out.
Credit
National Highway Traffic Safety Administration (NHTSA)
2024
Scanners count hail dents
DEKRA says that after a hailstorm owners can wait five to six weeks for an expert to inspect their car, and that in 2023 the industry settled about 465,000 hail, heavy-rain and storm claims worth €1.3 billion. In summer 2024 the inspection company DEKRA first used hail scanners, drive-through arches that photograph a car and count and size its dents, and reported that its experts saved five to ten minutes per vehicle with consistent results.
Credit
DEKRA, testing scanners made by others
Watch for
Bumper repairs benchmarked
Plasnomic, a plastic-repair benchmarking group, says it has finished the first phase of tests on repairing polypropylene bumper covers, comparing weld materials and fusion methods from 11 suppliers in North America, Europe and Asia-Pacific, and found "meaningful variation" between them. Its next phase compares filler, adhesive, staple and fusion repairs, with attention to areas near driver-assistance sensors, and is to end in a white paper.
Achieved whenthe white paper publishes measured results by method, and an outside lab or carmaker confirms them.
Claimed by
Plasnomic, May 2026
Open
01
A hail-dent answer key
A public set of hail-damaged panels in which every dent is counted, located and measured by hand, scanned and photographed, so that hail scanners and phone apps can be scored on the count by dent size.
The briefCredit · unclaimed02
A robot removes a dent
A robot arm that takes small dents out of scrap steel panels without paint damage, pulling with glued tabs from outside or pushing with a rod where it can reach behind, guided by a camera watching a line board.
The briefCredit · unclaimed
Open 01 · the brief
A hail-dent answer key
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of hail-damaged panels in which every dent is counted, located and measured by hand, scanned and photographed, so that hail scanners and phone apps can be scored on the count by dent size.
Why it is still open
Scanners are in use and DEKRA reports time saved, but a search found no independent test of their dent counts; makers' own figures, such as the "well over 85 percent" estimating accuracy claimed for Chief's Constellation scanner in 2021, are not checked against hand counts. A 2024 paper by Izabela Potasz and colleagues on structured-light dent detection was validated against appraisers on its own data and releases no set, and the one open-source hail-dent project found, a 2019 student project with striped lighting, has no labeled data.
Built with what exists
Hail-damaged hoods, roofs and doors from salvage yards; a PDR line board, the striped reflector technicians use to see dents; a dial depth gauge; a structured-light or phone lidar scanner; an open object-detection model such as YOLO as a baseline; a public repository.
First step
Buy five hail-damaged hoods and have two paintless dent technicians count them separately, to measure how far two people disagree.
Done looks like
At least 100 panels and 5,000 dents, each counted by two people working separately, with their agreement reported, and at least two commercial scanners or apps scored on count error per panel by size class.
Open 02 · the brief
A robot removes a dent
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot arm that takes small dents out of scrap steel panels without paint damage, pulling with glued tabs from outside or pushing with a rod where it can reach behind, guided by a camera watching a line board.
Why it is still open
Paintless dent repair is still done by hand by trained technicians; hail scanners such as Chief's Constellation measure the dents but do not fix them. The one announced project to automate panel repair, by Tradiebot Industries with the University of New South Wales and the repair network AMA Group in 2018, aimed at plastic parts, and no later result was found. Recent repair robots paint or polish instead, such as the jetstream painting robot, already in use at a shop in Hanover, whose sales rights the spray-gun maker SATA took in 2026.
Built with what exists
A collaborative robot arm with a force sensor, such as a Universal Robots UR10e; standard glue-pull tabs and hot glue; a line board and camera; a structured-light scanner to measure depth before and after; robot learning from a few human demonstrations (see the Note "Five demonstrations per task"), trained with the open-source LeRobot library.
First step
Build a drop-weight rig that makes repeatable dents in one scrap hood and scan ten dents to show they repeat within 0.5 mm.
Done looks like
Twenty filmed attempts on dents of 10 to 30 mm made by a drop-weight rig in scrap steel hoods, each scanned before and after, with a published tally of dents brought within 0.2 mm of the surrounding surface without cracked paint, beside the same tally for a human technician.