BRENNEN

Industries / Food, farming and forestry / Agriculture and farming / Cannabis and hemp

Extraction

Separating the plant's cannabinoids and aromatic oils from the dried plant, with a solvent such as butane, ethanol or carbon dioxide, to make oils, concentrates, vape liquids and medicines.

7

Milestones achieved, from 2005 to 2022.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 2005

    A plant extract becomes medicine

    Sativex, a mouth spray made from two cannabis extracts with set amounts of THC and CBD, went on the market in Canada on 22 June 2005, by Health Canada's drug database, and was first authorized in the UK on 16 June 2010. Its UK label gives the extraction solvent as liquid carbon dioxide. A 2014 review in Drug Testing and Analysis describes how GW Pharmaceuticals had to control the plant's natural variation to make it, and calls it the first cannabis-based medicine approved in the UK.

    health-products.canada.camedicines.org.ukebi.ac.uk

    Credit

    GW Pharmaceuticals

  2. 2014

    Butane extraction burns rise

    Butane hash oil is a concentrate made by washing cannabis with liquid butane, a highly flammable fuel gas. A Colorado team using burn-center records found 29 patients admitted for burns from making it between January 2008 and August 2014: none before medical cannabis was liberalized, 19 during the medical period from October 2009 and 12 in 2014, after legalization. Nineteen needed skin grafts (Bell and colleagues, Journal of Medical Toxicology, 2015).

    LessonThe authors called for standard manufacturing processes and worker safety rules; Washington's processing rule, in force since 2013 and amended since, now requires a commercially made closed-loop system, one that recaptures the solvent, certified by a licensed engineer and approved by the local fire official.

    ebi.ac.ukapp.leg.wa.gov

    Credit

    Bell, Monte and colleagues

  3. 2017

    Fire code covers extraction

    The 2018 edition of NFPA 1, the model fire code of the US National Fire Protection Association, released in November 2017, added Chapter 38 on marijuana growing, processing and extraction facilities. It applies to new and existing buildings built or altered to grow and process cannabis, and not to shops.

    ohsonline.com

    Credit

    National Fire Protection Association

  4. 2018

    A purified plant drug

    On 25 June 2018 the US Food and Drug Administration (FDA) approved Epidiolex, an oral solution of cannabidiol (CBD), for seizures in two rare forms of epilepsy, Lennox-Gastaut and Dravet syndromes, in patients aged two and older. FDA says it contains "a purified form" of CBD and in 2023 listed it as the one cannabis-derived drug product it had approved; its three other cannabis-related approvals, Marinol, Syndros and Cesamet, are synthetic.

    accessdata.fda.govfda.gov

    Credit

    GW Research Ltd (GW Pharmaceuticals)

  5. 2019

    Canada licenses extracts

    Canada's rules for the legal production and sale of cannabis extracts, edible cannabis and cannabis topicals (products put on the skin) came into force on 17 October 2019, as the Cannabis Act required, with sales to begin gradually and no earlier than mid-December 2019.

    canada.ca

    Credit

    Health Canada

  6. 2019

    Vape additive linked to injuries

    In 2019 a lung injury tied to vaping, named EVALI, put people in hospital across the US. By 18 February 2020 the Centers for Disease Control and Prevention (CDC) had counted 2,807 hospitalized cases or deaths, 68 of them deaths. Vitamin E acetate, an oily additive, was found in lung fluid from 48 of 51 patients tested and in none of a healthy comparison group (Blount and colleagues, New England Journal of Medicine, 2020), and CDC calls it "strongly linked" to the outbreak.

    LessonMost cases involved THC vape products, and 78% of hospitalized patients who named a source had obtained them only from informal sources such as friends, family or dealers.

    archive.cdc.govebi.ac.uk

    Credit

    CDC; Blount and colleagues

  7. 2022

    Converted THC draws warnings

    Hemp contains little delta-8 THC, an intoxicating relative of the main form of THC, so makers produce it by chemically converting CBD extracted from hemp. In May 2022 FDA warned that some use "potentially unsafe household chemicals" and work in uncontrolled or unsanitary settings. FDA had received 104 adverse event reports about delta-8 products from December 2020 to February 2022, and US poison control centers 2,362 exposure cases from January 2021 to February 2022.

    LessonThe 2018 federal hemp law limited only delta-9 THC; in November 2025 Congress rewrote the definition to exclude cannabinoids "synthesized or manufactured outside the plant" and finished products with more than 0.4 milligrams (mg) of total THC per container (Public Law 119-37, section 781).

    fda.govgovinfo.govakerman.com

    Credit

    FDA

Watch for

  1. Converted hemp THC excluded

    Under Public Law 119-37, as amended by Public Law 119-103 (signed 2 September 2026), products containing cannabinoids the plant cannot make were excluded from federal hemp from 12 November 2026. The rest of the new definition takes effect on 11 December 2026: total THC, counting THCA, of no more than 0.3% by dry weight; no cannabinoids made outside the plant, such as delta-8 converted from CBD; and no more than 0.4 mg of total THC and THC-like cannabinoids per finished container.

    Achieved when11 December 2026 passes without a further delay and FDA has published the cannabinoid lists the law calls for.

    govinfo.govgovinfo.gov

    Claimed by

    US Congress, September 2026

Open

  1. 01

    Container check for hemp

    An open tool, and a public sample audit, that reads the certificate of analysis (COA, the lab report a seller posts for a batch) of a hemp product sold online, works out total THC per container from the reported values and the net weight, and flags products over the federal cap of 0.4 mg or listing converted cannabinoids such as delta-8 or delta-10 THC.

    The brief
    Credit · unclaimed
  2. 02

    Solvent failures across states

    A count, from public lab results, of how often concentrates fail residual-solvent tests (butane, propane, ethanol and others left in the product) in each state, by product type and by lab, set against each state's limit for each solvent.

    The brief
    Credit · unclaimed

Open 01 · the brief

Container check for hemp

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open tool, and a public sample audit, that reads the certificate of analysis (COA, the lab report a seller posts for a batch) of a hemp product sold online, works out total THC per container from the reported values and the net weight, and flags products over the federal cap of 0.4 mg or listing converted cannabinoids such as delta-8 or delta-10 THC.

Why it is still open

The cap applies from 11 December 2026, and as of 28 September 2026 FDA had not published the cannabinoid lists or the added detail on "container" that the law required within 90 days (Congressional Research Service). Regulators have tested products directly: Oregon's tested 151 samples and found that only 10% of hemp edibles had clear potency labels tied to verifiable results (Oregon Liquor and Cannabis Commission, March 2025). No published check of hemp products against the per-container cap from their own certificates was found.

everycrsreport.comcontent.govdelivery.com

Built with what exists

The statute text; Cannlytics' open-source COA parser, COAdoc (MIT license), which uses lab-specific readers and falls back to an AI model for unknown lab formats; USDA's formula for total THC (delta-9 THC + 0.877 × THCA); a spreadsheet for the hand check. An AI model reviewing production records is the subject of the Note "Seven more flagged".

  1. First step

    Collect the certificates for 30 hemp gummies and drinks from five large online sellers and count how many give enough data (batch number, net weight, THCA and delta-9 THC values) to compute the per-container figure at all.

  2. Done looks like

    300 hemp products from at least 40 brands, each with its certificate link, the computed mg of total THC per container, a pass or fail against 0.4 mg, and a flag for converted cannabinoids; a hand check of 50 products agrees with the tool on at least 48; data and code released.

Open 02 · the brief

Solvent failures across states

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A count, from public lab results, of how often concentrates fail residual-solvent tests (butane, propane, ethanol and others left in the product) in each state, by product type and by lab, set against each state's limit for each solvent.

Why it is still open

Jameson and colleagues (Environmental Health Perspectives, 2022) found that 36 states and DC regulated 679 contaminants, including 74 solvents, with action levels differing by up to four orders of magnitude, but measured failure rates only in California records from 2020–2021 (9.2% of extracts, all contaminants together). Cannlytics' standard list of solvent analytes is still marked "coming soon".

ebi.ac.ukhuggingface.co

Built with what exists

Cannlytics' cannabis_results dataset (CC BY 4.0, public results from 14 states; its Oregon file has 196,900 results from February 2021 to April 2024 with solvent columns, about 4,400 with a butane value); the state rule lists compiled by Jameson and colleagues; Python with pandas.

  1. First step

    Load the Oregon file, keep extracts and concentrates with solvent values, and compute failure rates against Oregon's published action levels.

  2. Done looks like

    Failure rates for each solvent in at least four states, with counts and confidence intervals, next to a table of each state's limits; data and code released.