BRENNEN

Industries / Food, farming and forestry / Agriculture and farming / Cannabis and hemp

Drying, curing and storage

Taking water out of harvested flower slowly enough to keep its aroma, then curing and storing it so that mold cannot grow.

5

Milestones achieved, from 2016 to 2023.

1

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 2016

    Irradiation for medical flower

    Countries with national medicinal cannabis programs set strict microbial limits for dried flower, and Arno Hazekamp of Bedrocan wrote in 2016 that gamma irradiation "currently seems the only method available" to meet them. His tests on four varieties found that standard gamma treatment did not change THC or CBD content, water content or the flowers' structure, but reduced some terpenes, the compounds that give cannabis its smell.

    LessonKilling microbes after drying costs some aroma.

    ebi.ac.uk

    Credit

    Arno Hazekamp, Bedrocan

  2. 2017

    Fungi found in dispensary flower

    After a UC Davis cancer patient who used medical cannabis during chemotherapy died of a rare fungal infection, UC Davis researchers had 20 samples from Northern California dispensaries tested, and found most carried bacteria and fungi that can infect people with weakened immune systems (Clinical Microbiology and Infection, 2017).

    LessonThe study did not prove the cannabis caused the infection, but it showed that dried flower can deliver live fungi to the lungs of vulnerable patients.

    cbsnews.comebi.ac.uk

    Credit

    George Thompson, Joseph Tuscano and colleagues (UC Davis), with Steep Hill Laboratories and the Translational Genomics Research Institute

  3. 2018

    A standard for dryness

    ASTM International published D8196, a standard way to measure the water activity of cannabis flower, and D8197, a recommended storage range of 0.55 to 0.65. Water activity, on a scale of 0 to 1, measures how much of the water in the flower is free for microbes to use, which is different from moisture content, the total water. D8197 says that below 0.65 guards against mold, above 0.55 guards against brittle flower, and flower above 0.68 must be dried further.

    webstore.ansi.orgstandards.nimonik.com

    Credit

    ASTM International

  4. 2019

    A pass-fail line in law

    California's cannabis lab rules, finalized in 2019 and now in Title 4 of its regulations, fail any batch of dried flower or pre-rolls whose sample has a water activity above 0.65. They also fail inhalable products if any of four disease-causing Aspergillus molds (A. fumigatus, A. flavus, A. niger, A. terreus) is detected in 1 gram. A batch that fails cannot be sold.

    law.cornell.edulaw.cornell.edu

    Credit

    California Bureau of Cannabis Control, now the Department of Cannabis Control

  5. 2023

    Drying choices change mold counts

    Zamir Punja's group at Simon Fraser University tested more than 2,000 fresh and dried samples of greenhouse-grown cannabis for total yeast and mold over three years (2019–2022). Hang-drying whole stems, and drying to 12–14% moisture (water activity 0.65–0.70) or lower, went with lower counts, as did fans during flowering and cultivars with fewer leaves in the flower heads. They note that North American limits range from 1,000–10,000 colony-forming units (cfu) per gram up to 50,000–100,000 cfu/g, depending on the jurisdiction.

    LessonBy the authors' account, the plate counts that limits are written in cannot tell the few harmful molds from the many harmless ones.

    ebi.ac.uk

    Credit

    Punja, Ni, Lung and Buirs (Simon Fraser University)

Watch for

  1. Electron beam instead of gamma

    In a 12-week study of dried hemp flower from two cultivars, electron-beam treatment cut microbial counts from as high as 4.1 million cfu/g to 2 cfu/g without changing cannabinoid content. Terpenes fell 8.4% at once, and after 12 weeks treated and untreated flower had lost 24.0% and 22.3% respectively.

    Achieved whena laboratory with no tie to the authors repeats the result on high-THC cannabis flower, or a medical cannabis regulator accepts electron-beam-treated flower as meeting its microbial limits.

    ebi.ac.uk

    Claimed by

    researchers at Puregene AG and Seedcraft, in the journal Molecules, September 2025

Open

  1. 01

    Test the 0.65 line

    From public lab results, measure how often dried flower fails yeast-and-mold limits at each level of water activity, and show whether 0.65, the limit in ASTM D8197 and California's rules, marks a real change in risk.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test the 0.65 line

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

From public lab results, measure how often dried flower fails yeast-and-mold limits at each level of water activity, and show whether 0.65, the limit in ASTM D8197 and California's rules, marks a real change in risk.

Why it is still open

The largest study found, by Punja and colleagues (2023), used about 2,000 samples from greenhouse-grown cannabis and reported that counts fell as moisture fell. A search of Europe PMC in November 2026 found no study that sets water activity against microbial results in state-scale public lab data. Microbial failures caused 112 of the 363 US cannabis product recalls (29%) that Medicinal Genomics, a seller of microbial tests, compiled up to March 2025. %20AND%20%22water%20activity%22&format=json&pageSize=30)

ebi.ac.ukafdo.org

Built with what exists

Cannlytics' open cannabis_results dataset on Hugging Face (CC BY 4.0), whose Maryland subset has both water activity and total yeast and mold for 83,446 flower ("Buds") results tested from 2017 to 2023, and whose Rhode Island subset has both for 6,779 results; Python with pandas and statsmodels.

  1. First step

    Download the Maryland subset, keep the flower results that report both water activity and total yeast and mold, and plot one against the other.

  2. Done looks like

    Failure rates by water-activity band (steps of 0.05), with confidence intervals, for at least 80,000 flower results from at least two states; placeholder and impossible values listed and removed by a written rule; code and the exact data version published, so a second person can rerun it and get the same numbers.