Industries / Food, farming and forestry / Agriculture and farming / Cannabis and hemp
Lab testing
Licensed labs test a sample from each batch for strength (THC and CBD), moisture and contaminants such as pesticides, solvents, metals and molds, and issue a certificate of analysis (COA), the report that clears the batch for sale.
7
Milestones achieved, from 1964 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1964
THC isolated and identified
Yehiel Gaoni and Raphael Mechoulam isolated delta-9-tetrahydrocannabinol (THC), the plant's main intoxicating compound, from hashish, worked out its structure and made it in part by synthesis (Journal of the American Chemical Society, April 1964). Potency tests on legal products report this compound and its acid form, THCA.
Credit
Yehiel Gaoni and Raphael Mechoulam
2017
Pesticide tests made mandatory
In May 2017 Health Canada began requiring licensed medical cannabis producers to test their products for all banned pesticides. Mettrum, Organigram and Aurora had announced recalls in December 2016 over contaminants including the fungicide myclobutanil and the insecticide bifenazate, and random spot tests had found unauthorized pesticides at two more producers (The Globe and Mail, 5 May 2017).
LessonBanned sprays reached patients in a supply that relied on producers' own records until products were tested.
Credit
Health Canada
2018
Labs disagree on THC
Nick Jikomes and Michael Zoorob analyzed Washington State's public seed-to-sale data and found that state-certified labs reported systematically different cannabinoid levels, even after controlling for likely confounders (Scientific Reports, 2018). Zoorob later found that reported THC jumps just above 20%, a level buyers pay more for: by about 17% in Washington and 43% in Nevada, and by about 47% at two Washington labs whose licenses were suspended for testing irregularities (Journal of Cannabis Research, 2021).
LessonWhen higher THC sells for more, sellers pick labs that report more ("lab shopping"); a 2023 retest of 23 Colorado flower samples found about 70% more than 15% below the THC on their labels (Schwabe and colleagues, PLOS ONE).
Credit
Nick Jikomes and Michael Zoorob
2020
Shared samples check labs
The US National Institute of Standards and Technology (NIST) launched its Cannabis Laboratory Quality Assurance Program (CannaQAP) in 2020, sending the same hemp and cannabis samples to many labs and publishing how their results compared. In the third round, 89 labs measured moisture in one hemp sample and only 20% reported results within NIST's target range (NIST IR 8574, April 2025). NIST also made RM 8210, a hemp reference material with values for 7 cannabinoids, moisture and 13 toxic elements, and says the program will offer no more rounds. Standards work runs alongside it: ASTM International formed Committee D37 on Cannabis in 2017, now about 900 members from 30 countries.
LessonWithout a shared drying method, labs could not agree on moisture, the number that potency "by dry weight" depends on; Ohio's Division of Cannabis Control, saying that standard dry-weight methods can over-dry samples, has required potency to be reported "as received", with no moisture correction, for samples collected from 21 April 2025.
Credit
Andrea Yarberry, Walter Wilson and colleagues, NIST; ASTM Committee D37
2021
Hemp tests count THCA
A US Department of Agriculture (USDA) rule, effective 22 March 2021, requires hemp crops to be sampled no more than 30 days before harvest and tested for total THC, which counts THCA, the acid form that turns into THC when heated, as delta-9 THC + 0.877 × THCA. It requires labs registered with the Drug Enforcement Administration, with enforcement of that part delayed to 31 December 2022 because few labs held registrations.
LessonA test for delta-9 THC alone misses THCA, which can turn into THC; Congress wrote total THC into the definition of hemp in 2025.
Credit
USDA Agricultural Marketing Service
2024
One method for flower
From 1 January 2024 California's Department of Cannabis Control required licensed labs to measure cannabinoids in dried flower and pre-rolls by one standard method, a rule written after concerns about inflated potency and lab shopping. Only 18 of the state's 38 licensed labs had been approved to use it by 8 January, and the rest could test only other products such as edibles and concentrates until approved (Cannabis Business Times, 11 January 2024).
Credit
California Department of Cannabis Control
2025
A state lab tests products
Oregon's House Bill 2931 of 2023 created a state-run cannabis reference lab. In September 2024 the Oregon Liquor and Cannabis Commission (OLCC) sent notices to seven of the state's eleven accredited labs, alleging sampling failures at all seven and, at three, that staff added kief, a resin powder, to samples (Harris Sliwoski, October 2024). In March 2025 the OLCC reported 151 product tests made with the Oregon Department of Agriculture's Cannabis Reference Testing Laboratory: every hemp flower sample exceeded 0.3% total THC, and 72% of hemp edibles held prohibited THC levels.
Credit
Oregon Liquor and Cannabis Commission; Oregon Department of Agriculture
Watch for
FDA's cannabinoid lists
Public Law 119-37 required FDA to publish, within 90 days of 12 November 2025, lists of the cannabinoids the plant can make, the THC-class cannabinoids that occur in it and others with THC-like effects, plus more detail on what counts as a "container". Labs need these to report against the new 0.4 mg cap. The Congressional Research Service reported that no list had been published as of 28 September 2026.
Achieved whenFDA publishes the lists and container detail, and labs' certificates report against them.
Claimed by
US Congress, November 2025
Open
01
Test California's standard method
A before-and-after study of whether California's standard method, required for flower from 1 January 2024, narrowed the gaps between labs: each lab's average THC offset from other labs for the same producers and strains, by half-year, and whether the jump in results just above 20% THC shrank.
The briefCredit · unclaimed02
Moisture's share of lab gaps
For each lab in one state's public results, its THC offset from other labs testing the same producers' flower, measured twice: as reported, and after converting each result to an "as received" basis with the moisture figure the lab itself reported. The output is the share of each lab's offset that moisture handling explains.
The briefCredit · unclaimed
Open 01 · the brief
Test California's standard method
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A before-and-after study of whether California's standard method, required for flower from 1 January 2024, narrowed the gaps between labs: each lab's average THC offset from other labs for the same producers and strains, by half-year, and whether the jump in results just above 20% THC shrank.
Why it is still open
The rule began with fewer than half of licensed labs approved to use it (Cannabis Business Times, January 2024). The methods to measure lab offsets and bunching exist and were applied to Washington and Nevada data (Jikomes and Zoorob, 2018; Zoorob, 2021), but no published before-and-after measurement for California's method was found.
Built with what exists
Cannlytics' cannabis_results dataset, whose California file holds 71,581 results (CC BY 4.0, a 1.6 GB CSV), plus certificates on labs' public portals; Python with pandas and statsmodels for mixed-effects models; the McCrary density test that Zoorob used.
First step
Download the California file and count flower results per lab per quarter on each side of 1 January 2024, to see whether there is enough data before and after.
Done looks like
Per-lab THC offsets with confidence intervals for each half-year from 2022 to 2026, built on at least 20,000 flower results, and the 20% bunching test run on each side of 1 January 2024; code and data released.
Open 02 · the brief
Moisture's share of lab gaps
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
For each lab in one state's public results, its THC offset from other labs testing the same producers' flower, measured twice: as reported, and after converting each result to an "as received" basis with the moisture figure the lab itself reported. The output is the share of each lab's offset that moisture handling explains.
Why it is still open
In NIST's third shared-sample round only 20% of 89 labs measured moisture within NIST's target range (NIST IR 8574), and Ohio banned dry-weight potency reporting in 2025 because drying methods can over-dry samples. Undark's 2025 investigation of Oregon's records found one lab, listed by the state as Lab 129701, reporting significantly higher THC than other labs while its share of samples grew, but neither Undark nor the published lab-offset studies (Jikomes and Zoorob, 2018) separate moisture handling from other causes, and searches of Europe PMC and the web in November 2026 found no study that does.
Built with what exists
Cannlytics' cannabis_results dataset (CC BY 4.0), whose Oregon file holds 111,381 results with both a moisture content and a THC value from 23 labs, Lab 129701 among them, and whose Maryland file holds 88,989 such results from 7 labs (counts made for this file in November 2026); Python with pandas and statsmodels, using the producer-and-month controls Jikomes and Zoorob used.
First step
Load the Oregon file, keep flower results with both values, and set each lab's median moisture beside the state's median.
Done looks like
For every lab with at least 1,000 flower results, its THC offset with a confidence interval on both bases and the share explained by moisture, with the figure for Lab 129701 stated; code and the exact data version released so that a second person gets the same numbers.