Industries / Energy, water and waste
Batteries and energy storage
The batteries and energy storage industry makes the materials, cells and packs that store electricity in chemical form, builds them into systems that store power for the grid, and tests and recycles them.
1800
In a letter dated 20 March 1800 at Como, Italy, and read to the Royal Society of London on 26 June 1800, Alessandro Volta described his pile: pieces of copper or silver, each laid against a piece of tin or zinc, stacked with layers of water or a better-conducting liquid between the pairs. It gave shocks like a weakly charged Leyden jar, a glass jar that stores static electricity, but its charge restored itself after each shock. The Royal Society printed the letter, written in French, in its Philosophical Transactions that year.
42
Milestones achieved across 7 domains.
13
To watch for: announced, not yet confirmed outside.
14
Open deliverables. Nobody has shipped them.
In one minute
Where it started
In 1800 Alessandro Volta showed that a stack of two metals with wet layers between them makes electricity, and around 1860 Gaston Planté made a lead-acid cell that could be charged again. Dry cells, with a paste in place of liquid, were sold to the public from 1896 and made batteries everyday goods. In 1991 a Sony plant in Japan began making lithium-ion cells, built on a cathode found at the University of Oxford in 1980 and a carbon anode found at Asahi Kasei in 1985.
Where it stands
Demand for lithium-ion batteries reached 1.59 TWh (terawatt-hours, or billions of kilowatt-hours) in 2025, up 29% in a year, and demand for grid storage grew 51%, by Benchmark Mineral Intelligence's count. BloombergNEF's survey puts the average pack price at a record low of $108 per kilowatt-hour in 2025, and $70 for packs for stationary storage, the cheapest use for the first time. By the International Energy Agency's count, China made well over 80% of the world's batteries in 2025, and lithium iron phosphate cells were used in more than 90% of battery storage systems.
What is open
Much of what the industry knows stays inside companies: where materials are made, how precursor powders are mixed, which coating defects matter and how strong a weld is. Several open jobs turn that into checked public data, and others test what batteries and sellers tell people, such as the battery-health figure that phones sold in the EU must now show, the safety marks on e-bike batteries sold online, and how much of the recycling capacity companies announce is actually used. On the grid, nobody has pooled noise measurements from working battery sites or worked out how long retired grid batteries lasted.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Materials
Materials work finds and makes what goes inside a cell: the two electrodes that store charge (the cathode, or positive side, and the anode, or negative side), the electrolyte that carries charged atoms between them, and the powders that become those electrodes.
6 · 2 · 2
Last achievedThree metals in one cathode2001
Watch forManganese-rich cells for trucks
2
openCell manufacturing
Cell manufacturing turns the materials into finished cells: mixing them into a paste, coating it on metal foil, drying and pressing the foil, winding or stacking the layers, filling the cell with electrolyte, sealing it, and charging it for the first time under control.
6 · 2 · 2
Last achievedNorthvolt goes bankrupt2025
Watch forDry-made cathodes at scale
2
openPack assembly
Pack assembly joins single cells into a finished battery, with metal strips that carry the current, a frame and case, cooling, fuses and wiring, ready to clip into a tool, a bike, a scooter or a home system.
4 · 2 · 2
Last achievedOne pack, many brands2018
Watch forBatteries owners can replace
2
openBattery management
Battery management is the electronics and software inside a pack that measure each cell's voltage, current and temperature, keep the cells evenly charged, cut the power when something goes wrong, and estimate how full the battery is (state of charge) and how worn it is (state of health).
6 · 1 · 2
Last achievedPhones show battery health2025
Watch forPhone health from charging curves
2
openTesting and safety
Testing and safety is the work of proving that cells and packs survive abuse such as crushing, overcharging and heat, writing the standards they must pass, and investigating fires and recalls when they do not.
6 · 2 · 2
Last achievedNew York requires certified e-bikes2023
Watch forA federal e-bike battery rule
2
openRecycling
Recycling is collecting used batteries, making them safe, breaking them down and recovering their metals for new batteries, or putting packs that still hold charge back to work before they are broken down.
7 · 2 · 2
Last achievedA recycler fails before running2025
Watch forSecond-life packs run servers
2
openGrid storage systems
Grid storage systems are the large batteries, from a single shipping container to buildings full of battery racks, that utilities and companies connect to the grid, together with the inverters, cooling and controls that let them charge and discharge on command.
7 · 2 · 2
Last achievedA battery runs an island2019
Watch forSodium-ion containers for the grid
2
open
Advances to build with
3 research notes

Claude Fable 5.2
Three working devices
Anthropic says its AI model Claude Fable 5.2 designed three prototype devices that worked without electrical modifications, with no outside test reported.

Muse Ember
The jobs agents repeat
Meta's Muse Ember matched Claude Haiku 5.5 on an outside firm's tests at a third of the cost per task, though both list the same prices for text in and out.

Inkling 2 Small
Checked without being asked
The maker of Inkling 2 Small, Thinking Machines, says the AI model checks its work without being asked, a habit that no published test measures.
Open in batteries and energy storage
3 of 14 open deliverables
Open · Materials
Open map of material plants
A free, downloadable table and map of the world's plants that make cathode or anode material for lithium-ion cells, or the precursors for them. Each row gives the owner, location, product (for example LFP, NMC precursor, synthetic graphite or natural graphite), capacity in tonnes a year, status and start year, and links every fact to a public document.
Built with what exists
Company annual reports and stock-exchange filings in China, Korea, Japan and elsewhere; local environmental permit notices; a model that reads long documents in Chinese and English and pulls out tables, such as Meta's Muse Ember (see the Note "The jobs agents repeat"), with each value tied to its page; satellite imagery and OpenStreetMap to place each site; Python with pandas; Zenodo to publish with a citable DOI.
Open · Cell manufacturing
Defect finders across machines
A test of whether electrode-defect finders trained on one public image set still work on the other, and on a third small set made by hand. Map the two sets' defect labels onto one shared list, train on each set and score on the other. Then spread a water-based graphite paste (graphite, a little carbon black, and the binders CMC and SBR) on copper foil, make defects on purpose (air bubbles, specks of dirt, blade scratches, cracks from drying too fast), photograph and label them, and score both sets' models on these images too.
Built with what exists
The CoatingVision images and code; LIBAD's data on Hugging Face (free after accepting its conditions, CC BY 4.0) and its open BSD-licensed code; PatchCore-style anomaly detection, Ultralytics YOLO or a U-Net; a small vision model fine-tuned on one graphics chip, such as Liquid AI's LFM3 (see the Note "One GPU to fine-tune"); for the hand-made set, a doctor-blade film applicator (a hand-pulled blade set to a fixed gap), battery-grade graphite, CMC and SBR, copper foil and a lab oven, with a dust mask for the powders, a USB microscope or a phone camera with a macro lens, and Label Studio. The paste holds no lithium and no cells are built.
Open · Pack assembly
Weld strength from the trace
An open dataset of the spot welds that join nickel strip to cylindrical cells in e-bike and power-tool packs. Each weld gets the welder's settings, the energy or current trace the welder records, a close-up photo, and the force needed to peel the strip off in a pull test. Add a model that flags weak welds from the photo and trace alone, scored on welds it has not seen. Weld onto nickel-plated steel blanks as thick as a cell's case, never onto live cells.
Built with what exists
A capacitor-discharge spot welder that records each weld's energy or current, of the kind sold to pack hobbyists; nickel strip and nickel-plated steel blanks; a digital force gauge on a hand-cranked test stand; a phone camera with a macro lens; Python with scikit-learn; a small vision model fine-tuned on one graphics chip, such as Liquid AI's LFM3 (see the Note "One GPU to fine-tune").