BRENNEN

Industries / Energy, water and waste / Batteries and energy storage

Battery management

Battery management is the electronics and software inside a pack that measure each cell's voltage, current and temperature, keep the cells evenly charged, cut the power when something goes wrong, and estimate how full the battery is (state of charge) and how worn it is (state of health).

6

Milestones achieved, from 1995 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1995

    Batteries that report themselves

    Version 1.0 of the Smart Battery Data Specification, dated 15 February 1995, set a common list of values that a "smart" battery reports to the laptop, phone or video camera it powers and to its charger, such as remaining capacity, full-charge capacity, run time to empty and cycle count. Its authors wrote that batteries had been "an unpredictable source of power" whose users had "little advance knowledge" of when they would run out. Version 1.1 of 1998 lists Duracell, Intel, Benchmarq, Energizer, Linear Technology, Maxim, Mitsubishi Electric, National Semiconductor, Toshiba Battery and Varta as its owners. The Linux kernel carries a driver for batteries that follow it, written at NVIDIA in 2010.

    sbs-forum.orggithub.com

    Credit

    R. Dunstan (author of version 1.0) and the Smart Battery System Implementers Forum

  2. 2004

    Kalman filters estimate state

    Gregory Plett published a three-part paper in the Journal of Power Sources (volume 134, August 2004) on using an extended Kalman filter in the management systems of lithium-polymer packs for hybrid cars. A Kalman filter blends a model's prediction with each new measurement to estimate values that cannot be measured directly. Part 1 sets out the background and Part 3 covers estimating the pack's state and changing parameters. Semantic Scholar counts 1,897 papers citing Part 3.

    api.crossref.orgapi.semanticscholar.org

    Credit

    Gregory L. Plett

  3. 2019

    Life predicted from 100 cycles

    Researchers at Stanford, MIT and the Toyota Research Institute charged and discharged 124 commercial lithium iron phosphate cells under fast charging until each lost 20% of its capacity, which took from 150 to 2,300 cycles. A machine-learning model given voltage data from only the first 100 cycles predicted each cell's life with errors as low as 8%, and 15% using only the 10th and 100th cycles. The authors called it the largest public dataset of its kind. BatteryLife, a 2025 benchmark from another team, now gathers 16 datasets for the same task.

    escholarship.orgarxiv.org

    Credit

    Kristen Severson, Peter Attia, William Chueh, Richard Braatz and colleagues

  4. 2020

    Hidden slowdown costs Apple

    In 2016 Apple updated iPhone software so that phones with aged batteries ran their processors more slowly, to avoid sudden shutdowns when the battery could not hold up the voltage. California's attorney general said Apple described the updates as improving power management rather than admitting they reduced performance. In November 2020 Apple agreed to pay $113 million to California and 33 other states and to give truthful information on battery health and power management on its website, in update notes and in the iPhone's settings. Apple's support pages now describe battery health features for iPhone 6 and later.

    Lessonwhen battery management slows a device to protect a worn battery, the owner needs to be told and shown the battery's health.

    oag.ca.govtexasattorneygeneral.govsupport.apple.com

    Credit

    The attorneys general of California, Texas and other states

  5. 2024

    Owners may read battery health

    From 18 August 2024 the EU Batteries Regulation requires the management system of grid and home storage batteries, of batteries for e-bikes and other light vehicles, and of electric-car batteries to hold up-to-date data on the battery's state of health and expected life. Whoever bought the battery, and repairers or recyclers acting for them, must get read-only access. For storage and e-bike batteries the data include remaining capacity, energy throughput, deep discharges, time spent at extreme temperatures and the number of full charge cycles.

    eur-lex.europa.eu

    Credit

    European Parliament and Council of the EU

  6. 2025

    Phones show battery health

    Since 20 June 2025, mobile phones and tablets sold in the EU must show, in their settings or another place the user can reach, the battery's date of manufacture, date of first use, number of full charge cycles and measured state of health, the remaining full-charge capacity as a percentage of rated capacity.

    eur-lex.europa.eu

    Credit

    European Commission, Regulation (EU) 2023/1670

Watch for

  1. Phone health from charging curves

    A paper posted to Zenodo in January 2026 by Arun Teja Sara of Retronics Lab describes TVO, software that estimates a used phone's state of health from the shape of its charging voltage curve on ordinary Android phones, without special access. It was trained on charging records from 347 phones whose true capacity was measured on laboratory cyclers. In the authors' own cross-validation the version in use has an average error of 8.24%, and a candidate model 4.21%.

    Achieved whenan outside lab tests the software on phones it chose and publishes the errors.

    zenodo.org

    Claimed by

    Retronics Lab, January 2026

Open

  1. 01

    Check phone health readouts

    A public test of the battery-health figure that phones sold in the EU must now show. For each phone, compare the state of health in its settings with an outside estimate: the energy a USB power meter records while the phone charges from shutdown to full, divided by the same figure for a new phone of the same model, on one charger at room temperature. Publish the gap for each phone and each model.

    The brief
    Credit · unclaimed
  2. 02

    Read e-bike battery health

    A public table, for at least 15 e-bike battery systems sold in the EU, of which state-of-health and lifetime values an owner can actually read from the battery, how (app, Bluetooth, cable or dealer tool), and whether a dealer visit is needed. Add open-source readers for the systems that allow it, and check each reader's capacity figure against the energy a full charge takes, measured at the wall socket.

    The brief
    Credit · unclaimed

Open 01 · the brief

Check phone health readouts

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of the battery-health figure that phones sold in the EU must now show. For each phone, compare the state of health in its settings with an outside estimate: the energy a USB power meter records while the phone charges from shutdown to full, divided by the same figure for a new phone of the same model, on one charger at room temperature. Publish the gap for each phone and each model.

Why it is still open

The EU rule says what must be shown, and no published check of how close the figures are was found. Apple itself recalibrated the readout on iPhone 11 phones because of "inaccurate estimates of battery health reporting for some users". Research tools estimate health from voltage alone, such as V-Health, which its authors at the University of Colorado Denver and the University of Michigan report as under 5% error on Android phones, and Retronics' TVO, but neither reports how far makers' own readouts are off.

eur-lex.europa.eusupport.apple.comrtcl.eecs.umich.edu

Built with what exists

A USB-C power meter that logs energy in watt-hours; one fixed USB-C charger; used phones from refurbishers, with their battery screens photographed before testing; Python for the analysis. As a check on the method, phones whose batteries a repair shop is replacing anyway can have the old battery's capacity measured on a bench tester.

  1. First step

    Measure the charge energy from shutdown to full on three new and three used phones of one model, twice each, to see how repeatable the meter method is.

  2. Done looks like

    At least 60 phones of at least six models, each with its readout, its measured ratio and the method's uncertainty published, and a table of the average and worst gap per model.

Open 02 · the brief

Read e-bike battery health

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table, for at least 15 e-bike battery systems sold in the EU, of which state-of-health and lifetime values an owner can actually read from the battery, how (app, Bluetooth, cable or dealer tool), and whether a dealer visit is needed. Add open-source readers for the systems that allow it, and check each reader's capacity figure against the energy a full charge takes, measured at the wall socket.

Why it is still open

Since 18 August 2024 EU law has required e-bike batteries' management systems to hold remaining capacity, energy throughput, cycle counts and other values, with read-only access for the owner. Open-source tools on GitHub read some brands, such as Home Assistant integrations for Bosch systems and an ESPHome component for Fiido bikes, but one Bosch integration says state of health and measured capacity appear only after a dealer has run Bosch's capacity tester. No table across brands was found.

eur-lex.europa.eugithub.com

Built with what exists

The text of Article 14 and Annex VII of the regulation; the makers' own apps; Bluetooth tools such as nRF Connect and Wireshark; open projects such as the Bosch Home Assistant integrations and the Fiido ESPHome component; a plug-in energy meter; a coding agent that tests its own work, such as one built on Inkling 2 Small (see the Note "Checked without being asked").

  1. First step

    List the Annex VII values, then check three common e-bike apps for which of them an owner can see without a dealer.

  2. Done looks like

    At least 15 battery systems in the table, each entry with its method and screenshots or logs; readers published for at least five systems; for each, the reported capacity within a stated tolerance of the wall-socket measurement over three charges.