Industries / Transport and vehicles / Maritime and shipping / Barge and inland waterways
Loading and assembling tows
This is the work at the riverbank: loading and unloading barges at terminals, parking them in fleets until a towboat collects them, putting them together into tows, and the freight data that prices each trip.
4
Milestones achieved, from 1976 to 2016.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1976
Prices tied to old tariff
Grain barge rates on the Mississippi system were once set in Bulk Grain and Grain Products Freight Tariff No. 7, issued under the Interstate Commerce Commission. In 1976 the US Department of Justice and the ICC made the tariff no longer binding, but the trade still quotes rates as a percentage of its 1976 rates: at a quote of 200 percent, a barge from St. Louis costs twice the 1976 rate of US$3.99 a short ton, or US$7.98. USDA publishes these quotes weekly for seven points on the rivers.
LessonA retired tariff lived on as the unit of price, so a barge rate cannot be read in dollars without a 1976 table.
Credit
US Department of Justice; Interstate Commerce Commission; USDA Agricultural Marketing Service
1982
Rules for barge fleets
A fleet is a place where barges are moored, often many abreast, to wait for loading, unloading or a tow. On 8 July 1982 the US Coast Guard published rules for fleets on the Mississippi between miles 88 and 240 above Head of Passes, the stretch from New Orleans to Baton Rouge. They ban mooring to trees, set minimum wire sizes, require a person to watch the barges at all times and an inspection of moorings at least twice a day, and in high water require a radar-equipped towboat standing by for every 100 barges in larger fleets.
Credit
US Coast Guard
2008
Coal falls, open barges shrink
Open-top hopper barges carry coal, stone and other bulk that can get wet. US coal production is down by more than half from its 2008 peak, by figures Ken Eriksen gave at the 2026 Waterways Symposium, and the open-barge fleet keeps shrinking while the covered and tank fleets hold steady. A survey of operators put the 2025 US fleet at about 12,800 covered, 5,100 open and 3,900 tank barges, with more than 2,000 open barges at or past 25 years old.
LessonA fleet built around one cargo shrinks when that cargo goes, and coal exports, not power plants, now drive what open-barge demand is left.
Credit
figures from Ken Eriksen and The Waterways Journal's barge fleet profile
2016
Containers on the lower Mississippi
A weekly container-on-barge service between the ports of Greater Baton Rouge and New Orleans began in 2016, carrying containers of plastic resin downriver and empty ones back. The Port of New Orleans counted 20,500 container moves by barge in 2023, a record for the service, which Ingram Marine Group runs. In parts of Europe, containers have made up close to 10 percent of inland waterway cargo since the 2010s, by The Waterways Journal's account.
LessonA 2022 guest editorial in The Waterways Journal said containers on US rivers had been talked about for years "with minimal traction," because shippers had no end-to-end service they could book.
waterwaysjournal.netwaterwaysjournal.netwaterwaysjournal.net
Credit
Port of New Orleans; Port of Greater Baton Rouge; Ingram Marine Group
Watch for
Barges counted from orbit
Geoffery Agorku and three colleagues trained a YOLO v11 image model on high-resolution satellite pictures of 5,973 square miles of the lower Mississippi, matched to AIS ship-position signals. They report counting the barges in a tow with a mean error of 2.4 barges and telling covered from open barges with a 91.6 percent F1 score (a measure that balances missed and false detections), on 4,550 labeled examples.
Achieved whena group outside the authors reproduces the counts on other imagery, or a public agency or carrier uses them in routine reporting.
Claimed by
Geoffery Agorku, Sarah Hernandez, Hayley Hames and Cade Wagner, October 2025
Barge and rail, one timeline
OpenTug, which sells barge voyage software, and Telegraph, which predicts rail arrival times, announced a partnership on 26 May 2026 to show a terminal its incoming barges and railcars on one timeline, to cut idle time and demurrage (fees for holding equipment too long).
Achieved whena terminal using it publishes before-and-after figures for barge or railcar waiting time.
Claimed by
OpenTug and Telegraph, May 2026
Open
01
A public count of fleets
A count of the barges in every fleet between Baton Rouge and New Orleans on each date of free aerial photos, published with the labeled pictures, so anyone can see how full the fleets are and how that changes with harvest and river level.
The briefCredit · unclaimed02
Testing barge draft readers
An independent field test of the tools that read a river barge's draft (how deep the loaded hull sits) without a deckhand leaning over the edge: a dockside lidar unit, radar sensors set on the deck, and a phone photo method, each compared with careful hand readings at the same corners and with the terminal's certified weights.
The briefCredit · unclaimed
Open 01 · the brief
A public count of fleets
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A count of the barges in every fleet between Baton Rouge and New Orleans on each date of free aerial photos, published with the labeled pictures, so anyone can see how full the fleets are and how that changes with harvest and river level.
Why it is still open
Agorku and colleagues counted barges from commercial satellite pictures, and their paper's page does not say the data or code are released. USDA publishes weekly counts of grain barges moving through locks and unloaded in the New Orleans region, not of barges waiting in fleets.
Built with what exists
NAIP aerial photos, which USDA has taken at 0.6 m resolution since 2018 on a cycle of no more than three years; the Coast Guard's regulated stretch from mile 88 to mile 240 as the study area; Ultralytics YOLO11 for detection; Label Studio for labeling; QGIS.
First step
download the latest NAIP tiles for the river from Baton Rouge to New Orleans and count by hand the barges in 20 fleets.
Done looks like
at least 5,000 barges labeled across at least three NAIP years; on photos held back from training, the count for each fleet within 2 barges of a hand count for 90 percent of fleets; counts, labels and code published.
Open 02 · the brief
Testing barge draft readers
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent field test of the tools that read a river barge's draft (how deep the loaded hull sits) without a deckhand leaning over the edge: a dockside lidar unit, radar sensors set on the deck, and a phone photo method, each compared with careful hand readings at the same corners and with the terminal's certified weights.
Why it is still open
The American Waterways Operators' 2025 report on falls overboard tells operators to "use remote drafting devices," so that workers need not go to the unguarded edge to read drafts. Such devices are sold: CIS says its dockside DraftEye lidar is accurate within half an inch, and Bargetender's four radar sensors on the deck show the draft at each corner on a tablet. These figures are the makers' own, and searches found no test by anyone outside them.
americanwaterways.comwaterwaysjournal.netwaterwaysjournal.net
Built with what exists
the commercial systems, borrowed or rented from their makers; a phone camera with an open detection model such as Ultralytics YOLO11 and the OpenCV library to find the marks and the waterline; a surveyor's hand readings; the terminal's certified scale weights; each barge's capacity table.
First step
ask a terminal that already uses one of the systems to share a season of its readings beside its scale weights, and photograph 20 barges from the dock while its staff take their usual readings.
Done looks like
at least 100 barges at one grain or aggregates terminal read by each method and by hand at all four corners; for each method, the share of corners within 1 inch of the hand reading and the tonnage error against certified weight, published with the raw readings and the terminal's permission.