BRENNEN

Industries / Consumer goods / Baby products

Feeding

Feeding is the work of designing and making the goods used to feed babies: bottles and teats (the nipples a baby sucks), breast pumps, sterilizers and machines that prepare bottles of formula.

7

Milestones achieved, from 1845 to 2023.

2

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1845

    Rubber teats, then tube bottles

    In August 1845 Elijah Pratt of New York was granted US patent 4,138 for a nursing bottle with "an artificial nipple or sheath of india-rubber" over its sucking tube. Rubber teats were later joined to bottles by long rubber tubes. Museum Wales dates the first UK patent for one such design, the Siphonia, to 1855, and says the tube was hard to clean, so bacteria bred in it and many infants fell ill and some died; the design became known as the "murder bottle". Yale Medicine Magazine reports moves to ban such bottles as early as 1897, yet Sears, Roebuck still sold them in 1915, and the museum of the Royal Australian College of General Practitioners says they were sold until the 1920s. Bottles that could be boiled took over: Pyrex nursing bottles of heat-resistant glass "appeared on the scene in 1923", by the company's account as quoted by the State Historical Society of North Dakota.

    Lessona part that cannot be cleaned and boiled is a hazard, however convenient it is to use.

    patents.google.commuseum.walesmedicine.yale.eduracgp.org.aublog.statemuseum.nd.gov

    Credit

    Elijah Pratt; the makers of Pyrex

  2. 1956

    Pumps that copy sucking

    The Swedish engineer Einar Egnell published a study in 1956 of what happens mechanically in the breast under different ways of collecting milk. His Egnell SMB pump of about 1956, held by the Kunstpalast museum in Düsseldorf, mimicked the intermittent pressure of a nursing baby; it was heavy and expensive and used mainly in hospitals. Ameda, a pump maker, dates Egnell's first hospital-grade pump to 1942. Medela, founded by Olle Larsson in 1961, launched its first hospital pump in 1980. In the US a powered breast pump is a class II medical device (21 CFR 884.5160) that reaches the market through a 510(k) notice, in which the maker shows from its own bench tests, such as checking the vacuum at each setting, that the pump matches one already legally sold. Battery pumps worn inside the bra followed; the FDA cleared the Willow Wearable Breast Pump 2.0 in September 2019.

    eutils.ncbi.nlm.nih.govsammlung.kunstpalast.deameda.commedela.comaccessdata.fda.govfda.innolitics.com

    Credit

    Einar Egnell; Medela (Olle Larsson); US Food and Drug Administration (FDA)

  3. 1985

    A nitrosamine limit for teats

    A German study presented to the American Chemical Society in spring 1981 found volatile N-nitrosamines, a group of chemicals, in rubber baby-bottle nipples. The FDA then found them in nipples sold in the US, showed that they could pass into milk and formula during sterilization, and from 1 January 1985 treated any new nipple with more than 10 parts per billion (ppb) of any single nitrosamine as avoidable contamination under food law, judged on a composite of 12 nipples and confirmed by gas chromatography-mass spectrometry. The European Commission followed with Directive 93/11/EEC of 15 March 1993 on the release of nitrosamines from rubber teats and soothers (dummies).

    Lessonan outside lab's finding became a limit that makers could meet, with a fixed way to test it.

    fda.govlegislation.gov.uk

    Credit

    US FDA; European Commission

  4. 2010

    BPA out of baby bottles

    Bisphenol A (BPA) is a chemical that can be present in polycarbonate, a hard plastic. In June 2009 Health Canada proposed banning the advertising, sale and import of polycarbonate baby bottles that contain BPA, saying Canada was "the first country to move ahead with regulations" to do so; the ban took effect in March 2010 and also covers manufacture. The European Union banned making such bottles from 1 March 2011 and selling or importing them from 1 June 2011. In July 2012 the US FDA removed baby bottles and sippy cups from the permitted uses of polycarbonate, on a petition from the American Chemistry Council, an industry group, because "these uses have been abandoned"; it said the change was "not based on safety". In December 2024 the European Commission banned BPA in all food contact materials, and from 20 July 2026 most new articles made with it may no longer be placed on the EU market.

    Lessonin the US the market dropped the material before the rule did, and the rule recorded that change rather than a safety finding.

    canada.calaws.justice.gc.calegislation.gov.ukfederalregister.govfoodpackagingforum.org

    Credit

    Health Canada; European Commission; US FDA

  5. 2015

    Teat flow labels measured

    Britt Pados and colleagues measured flow by drawing infant formula through each nipple with a breast pump for one minute. Across 29 nipple types named by clinicians in three countries, flow ranged from 2.10 mL a minute to 85.34 mL a minute (2015). In 26 types from 15 brands sold in US shops, "the name of the nipple does not provide clear information about the flow rate" (2016). A 2019 study of 375 nipples of 25 types found 0.86 to 37.61 mL a minute and that packing information "did not accurately reflect" flow, and in 27 teat types used in Australia, Jeanne Marshall, Pados and colleagues found significant differences even among teats labelled "slow flow" (2020).

    Lessona word such as "slow" on the pack is the maker's own scale, not a measurement, and cannot be compared from one brand to another.

    eutils.ncbi.nlm.nih.goveutils.ncbi.nlm.nih.goveutils.ncbi.nlm.nih.govbird-alpaca-6elz.squarespace.com

    Credit

    B. F. Pados, J. Park, S. M. Thoyre, H. Estrem, W. B. Nix and P. Dodrill; J. Marshall, S. Clarke and C. Escott

  6. 2020

    Bottles shed microplastics

    Polypropylene makes up 82% of the world baby bottle market, by the Food Packaging Forum's account. A Trinity College Dublin team put 10 new polypropylene bottles through the cleaning, sterilizing and mixing steps the World Health Organization recommends for formula, over 21 days, and counted the plastic fragments (microplastics) released into the water with Raman spectroscopy, which identifies a material by how it scatters laser light. Release reached 16.2 million particles per litre, and sterilizing and hot water raised it. From feeding data for 48 regions, the team estimated that infants up to 12 months old could take in 14,600 to 4.55 million particles a day, and suggested an extra rinse after sterilizing. In October 2025 the European Food Safety Authority (EFSA) published a review finding that such particles can move from packaging or utensils into food, but "at much lower levels than some earlier studies suggested".

    Lessoncounts of tiny particles depend heavily on how they are measured, so one study's numbers need repeating with shared methods before they can rank products.

    eutils.ncbi.nlm.nih.govfoodpackagingforum.orgefsa.europa.eu

    Credit

    D. Li, J. J. Boland, J. J. Wang and colleagues, Trinity College Dublin; EFSA

  7. 2023

    Prep machines run cool

    Formula preparation machines heat and dispense the water for bottles of powdered formula. UK National Health Service and WHO guidance is to make up powdered formula with water of at least 70 °C, hot enough to kill harmful bacteria. In a community science study led by Aimee Grant of Swansea University, UK parents measured the water at home: only 11 of 74 machines (14.9%) reached 70 °C, against 54 of 69 kettle users (78.3%), and machine water averaged 65.78 °C against 75.29 °C from kettles. The UK Food Standards Agency advised checking that the water is at least 70 °C whatever the method, and said it was working with the Office for Product Safety and Standards on whether more action was needed.

    Lessona machine sold for making up feeds needs its water temperature checked at the spout, not taken from the box.

    eutils.ncbi.nlm.nih.govswansea.ac.uk

    Credit

    Aimee Grant, A. Brown and colleagues, Swansea University

Watch for

  1. Medela's in-bra pump

    Medela says its Magic InBra, a pump of about 200 g worn inside the bra, uses suction patterns modeled on its Symphony hospital pump and sensors that respond to milk flow to keep the vacuum stable. It went on sale in the US through Amazon in November 2025 at a suggested USD 399.99. Medela's UK product page gives no vacuum figures in mmHg (millimetres of mercury, the unit for how far a pump pulls pressure below the surrounding air).

    Achieved whenan outside bench test logs the pump's vacuum over time at each setting and shows the stability and pattern claimed, and the FDA's 510(k) database lists it as cleared.

    markets.financialcontent.comshop.medela.co.uk

    Claimed by

    Medela, November 2025

  2. Paid teat flow charts

    Infant Feeding Labs, owned by Britt Pados, says it does "independent, third-party testing" of bottles and nipples, and sells a membership at USD 147 a year with "the most up-to-date flow rate information available". Its two free charts, updated in August and October 2026, list only products whose makers "paid for the testing to be completed by Infant Feeding Labs", and the site does not describe its test method or say how many products it has tested.

    Achieved whenthe method and raw data are published, or another lab re-tests a sample of the listed nipples and matches the flows within a stated margin.

    infantfeedinglabs.cominfantfeedinglabs.com

    Claimed by

    Infant Feeding Labs, October 2026

Open

  1. 01

    An open teat flow table

    A free, public table of measured flow, in mL a minute, for at least 60 teat types bought in ordinary shops in at least four countries (for example the US, UK, Australia and Japan), tested on an open rig whose plans are published, with water and one fixed test milk, and re-run every six months as products change. No baby is involved; the rig does the sucking.

    The brief
    Credit · unclaimed
  2. 02

    Microplastic shedding, one method

    A public table of microplastics released by at least 20 bottles and teats of different materials (polypropylene, polyphenylsulfone or PPSU, silicone, and glass bottles with plastic parts), bought in several countries and all tested by one written protocol based on the Trinity College Dublin steps. The protocol includes procedural blanks, recovery tests with added reference particles, and a blind check by a second lab, and counts by size and polymer are published with the raw spectra.

    The brief
    Credit · unclaimed
  3. 03

    Pump suction against the label

    A bench rig and a public table of measured vacuum (in mmHg) over time and cycle rate (pulls per minute) at every setting of at least 20 personal-use breast pumps, including in-bra wearables, each compared with the figures the maker gives on its label or in its FDA 510(k) summary. The pump's flange is sealed onto a soft silicone phantom or plug; no person is involved.

    The brief
    Credit · unclaimed

Open 01 · the brief

An open teat flow table

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free, public table of measured flow, in mL a minute, for at least 60 teat types bought in ordinary shops in at least four countries (for example the US, UK, Australia and Japan), tested on an open rig whose plans are published, with water and one fixed test milk, and re-run every six months as products change. No baby is involved; the rig does the sucking.

Why it is still open

Pados and colleagues showed that pack names do not reflect flow, but their published studies are one-off snapshots from 2015 to 2020, mostly of US products, with one Australian set. Current data sit behind Infant Feeding Labs' paid membership; its free charts cover only products whose makers paid for testing, and it does not publish its method. Searches found no free, maker-independent table covering several countries.

eutils.ncbi.nlm.nih.govbird-alpaca-6elz.squarespace.cominfantfeedinglabs.com

Built with what exists

A vacuum source with a regulator (Pados's studies used a breast pump); a digital pressure sensor logged by an Arduino or Raspberry Pi; a lab balance reading to 0.01 g; a 3D-printed teat holder; Python; Browser Use 1.0 to keep the list of teats sold by the largest retailers in each country current (see the Note "Deleting 80% to start over"); CSV files in a public Git repository.

  1. First step

    Build one rig and test 10 samples each of three teat types from Pados's 2019 study, then compare with her published values.

  2. Done looks like

    At least 60 teat types from at least four countries, 10 of each, with mean flow and coefficient of variation (the spread between samples as a share of the mean) for water and test milk; a second rig built from the published plans gives results within 10% for 10 of the types; types from Pados's 2019 study that are still sold are reported side by side with her values.

Open 02 · the brief

Microplastic shedding, one method

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of microplastics released by at least 20 bottles and teats of different materials (polypropylene, polyphenylsulfone or PPSU, silicone, and glass bottles with plastic parts), bought in several countries and all tested by one written protocol based on the Trinity College Dublin steps. The protocol includes procedural blanks, recovery tests with added reference particles, and a blind check by a second lab, and counts by size and polymer are published with the raw spectra.

Why it is still open

The 2020 study tested 10 polypropylene bottles only. A 2021 Chinese study tested three brands of PPSU bottles by opening and closing them 100 times, with a different instrument, so its counts cannot be compared with the Dublin ones. A 2025 Food Packaging Forum review of 103 studies on food contact articles found data quality low in almost half and called for a harmonized testing framework; its dashboard gathers published studies but tests nothing new. Öko-Test's 2026 test of 14 plastic baby bottles did not include microplastics.

eutils.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govfoodpackagingforum.orgoekotest.de

Built with what exists

Time on a university's Raman or infrared microscope to identify polymers; Nile Red dye, a fluorescence microscope and Python with OpenCV to count particles on filters as a cheaper first screen; the open-source Open Specy spectral library; borosilicate glassware and filtered water; the protocol published openly before testing starts.

  1. First step

    Write the protocol from the 2020 paper's methods and run one polypropylene and one glass bottle with blanks, to learn the background count in your own lab.

  2. Done looks like

    At least 20 products of at least four materials, three units each; blanks below 10% of sample counts; at least 80% of added reference particles recovered; a second lab, testing five of the products blind, ranks them in the same order; all counts and spectra published.

Open 03 · the brief

Pump suction against the label

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench rig and a public table of measured vacuum (in mmHg) over time and cycle rate (pulls per minute) at every setting of at least 20 personal-use breast pumps, including in-bra wearables, each compared with the figures the maker gives on its label or in its FDA 510(k) summary. The pump's flange is sealed onto a soft silicone phantom or plug; no person is involved.

Why it is still open

The Washington State WIC program's April 2026 test procedure says pressure gauges "aren't accurate for personal-use pumps" and sends users of those pumps to the maker. FDA 510(k) summaries report the maker's own vacuum checks against its own specifications; Willow's for its third-generation pump lists 40 to 245 mmHg and a 270 mmHg maximum. A 2020 study measured six pumps from three makers with an analog gauge to see how swapping kits changes suction, not to check labels. BabyGearLab's reviewers measured 170 mmHg on an Elvie Stride against a claimed 300 mmHg, on one unit, with no method described. Searches found no public multi-brand table of measured suction for personal and wearable pumps.

doh.wa.govaccessdata.fda.goveutils.ncbi.nlm.nih.govbabygearlab.com

Built with what exists

An electronic gauge-pressure sensor logged at 100 or more samples a second by an Arduino or Raspberry Pi, calibrated against a reference digital manometer; a silicone phantom cast in a 3D-printed mould; Python for the pressure curves; a small model such as Meta's Muse Ember to pull the labeled vacuum ranges out of 510(k) PDFs (see the Note "The jobs agents repeat"); Claude Fable 5.2 to help draft the logger board (see the Note "Three working devices").

  1. First step

    Build and calibrate the sensor and check it on one multi-user pump against WIC's expected ranges (50 to 90 mmHg at the lowest setting, 200 to 270 mmHg at the highest), then test one wearable.

  2. Done looks like

    At least 20 pump models, three units each where possible, with every setting logged for two minutes; peak vacuum and cycles per minute reported with a stated uncertainty of no more than 5 mmHg, along with the share of models within 10% of their labeled maximum; rig plans, code and data published.