BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Wire and cable

Stranding and twisting

Stranding twists many wires together into one flexible conductor, and twisting insulated wires into pairs and laying pairs or cores together builds up a cable.

6

Milestones achieved, from 1881 to 2005.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1881

    Twisting cancels interference

    Alexander Graham Bell's US patent 244,426, granted on 19 July 1881, covered telephone circuits whose two wires are twisted round each other. Bell wrote that twisted wires gave "the most perfect freedom from inductive disturbance", the noise a line picks up from its neighbours.

    patents.google.com

    Credit

    Alexander Graham Bell

  2. 1933

    Split conductors for big currents

    Humphreys Milliken's US patent 1,904,162, filed in 1930 and granted in April 1933, divided a large cable conductor into identical segments. Alternating current crowds toward the surface of a thick conductor, the skin effect, and splitting the conductor reduces it.

    patents.google.com

    Credit

    Humphreys Milliken

  3. 1968

    Twist that reverses direction

    In SZ stranding the twist changes direction at intervals, so the supply reels can stand still outside the machine instead of spinning with it, which allows longer lengths and higher speeds. A 1968 paper by engineers from Sumitomo, Anaconda and Fujikura described the method for telephone cable, and in 1990 engineers at Kabelmetal wrote that it was "widely used in Europe" for power, control and communications cable.

    wirenet.orgwirenet.org

    Credit

    Sugi, Kumamaru, Wada and Mizoi

  4. 1991

    Grades for data cable

    The US industry standards groups EIA and TIA issued their building cabling standard, 568, in 1991, after work that began in 1985, and a bulletin that year, TSB-36, described Category 3, 4 and 5 cable. Category 5 was specified to 100 MHz.

    cablinginstall.comcablinginstall.com

    Credit

    EIA and TIA

  5. 1999

    Category 5 falls short

    Some cabling installed as Category 5 did not do what was expected of it. In 1999 TIA published TSB-95, which by the account of BICSI's Donna Ballast described "what to do to make the cabling that we had installed do what we thought it would do", and an addendum to its standard that set the tighter Category 5e.

    Lessona grade written before the uses it must serve may need tightening after the cable is already in the walls.

    cablinginstall.com

    Credit

    TIA

  6. 2005

    Large conductors measured

    A CIGRE working group, B1-03, reported in Technical Brochure 272 of 2005 that segmented conductors made of insulated wires had the lowest skin effect: a coefficient of 0.25 for enamelled copper wires against 0.80 for bare copper wires, as Nexans engineers summarized in 2007. Conductors up to 2,500 mm² were by then customarily used, they wrote.

    jicable.org

    Credit

    CIGRE working group B1-03

Watch for

  1. Faster compacted stranding

    Setic and Pourtier say their double-twist machines for compacted conductors of 61 wires, up to 630 mm², give "+ 40% increase in productivity" and a 30% cut in energy use compared with traditional methods.

    Achieved whena cable maker or an outside party publishes measured output and energy use.

    expometals.net

    Claimed by

    Setic Pourtier, February 2026

Open

  1. 01

    Crosstalk forecast from lay data

    A model that takes the twist lengths measured on the line for each pair of a data cable and predicts the near-end crosstalk, the signal that leaks from one pair into its neighbour, that the finished reel will show at its final test.

    The brief
    Credit · unclaimed
  2. 02

    Robot joins broken wires

    A robot that takes the two ends of a broken copper or aluminum wire, trims them, sets them in a cold-pressure welder, works the welder until the ends fuse and removes the flash, the ring of squeezed-out metal. Cold-pressure welding joins wires by force alone, with no heat or current, and is how operators join a broken wire or the wire of a new bobbin.

    The brief
    Credit · unclaimed

Open 01 · the brief

Crosstalk forecast from lay data

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A model that takes the twist lengths measured on the line for each pair of a data cable and predicts the near-end crosstalk, the signal that leaks from one pair into its neighbour, that the finished reel will show at its final test.

Why it is still open

A Beta LaserMike patent for measuring pair lays on the line states that "crosstalk performance of twisted pair cables is affected by the lay lengths of the pairs" and calls it "highly desirable" to correlate the line readings with the later offline tests. No published model that does so was found.

patents.google.com

Built with what exists

Line lay readings and final-test reports from one plant, a transmission-line simulation written in Python with scikit-rf, and a fitted correction model.

  1. First step

    Write the simulation for one four-pair design and check it against crosstalk curves published for a known cable.

  2. Done looks like

    On 50 reels not used to build it, predicted worst-pair crosstalk margin within 2 dB of the measured margin on at least 45.

Open 02 · the brief

Robot joins broken wires

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot that takes the two ends of a broken copper or aluminum wire, trims them, sets them in a cold-pressure welder, works the welder until the ends fuse and removes the flash, the ring of squeezed-out metal. Cold-pressure welding joins wires by force alone, with no heat or current, and is how operators join a broken wire or the wire of a new bobbin.

Why it is still open

Bench welders for wire are worked by hand: on Pressure Welding Machines' M101, for copper of 1.00 to 3.60 mm, "the handle is depressed four or five times to complete the weld". The only automatic model found is for rod of 15 to 25 mm.

expometals.net

Built with what exists

A bench cold-pressure welder, a low-cost arm with a two-finger gripper supported by LeRobot (Note "No download"), and a policy trained from demonstrations.

  1. First step

    Make twenty joins by hand, pull-test them to set the human baseline, and film each one for training.

  2. Done looks like

    Twenty filmed joins in 2 mm copper wire, each pull-tested, with the tally of joins that reach 90% of the unwelded wire's breaking load.