BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Wire and cable

Drawing wire

Drawing wire is casting copper or aluminum into rod and pulling it through a series of ever smaller dies, hard blocks with a tapered hole, until it reaches the size wanted, with heat along the way to soften it again.

5

Milestones achieved, from 1923 to 1974.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1923

    Carbide dies for lamp wire

    Karl Schröter of Osram filed a German patent on 30 March 1923 for cemented carbide, tungsten carbide grains bound with a metal such as cobalt, naming drawing dies among its uses. The International Tungsten Industry Association says Osram's factories tested it that year and quickly replaced diamond dies for drawing tungsten lamp wire down to 0.3 mm; Friedrich Krupp took over the rights in 1925 and sold the material as Widia, from "like diamond".

    patents.google.comitia.info

    Credit

    Karl Schröter, Osram; Friedrich Krupp

  2. 1963

    Rod cast without stopping

    Southwire's SCR system cast copper and aluminum rod continuously instead of in batches. Southwire says half the world's copper rod now passes through SCR systems; Aurubis, a European copper producer, lists Southwire casting wheels among the rod lines at its Olen plant in Belgium.

    southwire.comaurubis.com

    Credit

    Southwire

  3. 1972

    Belt casting feeds the mill

    The Contirod process, developed in 1972 by Union Minière of Belgium, Hazelett of the United States and Krupp of Germany, freezes liquid copper between moving belts into an endless bar that goes straight into a rolling mill. SMS group, which now sells it, says this was the first time a Hazelett twin-belt caster produced cast copper continuously; Aurubis runs Hazelett casters for Contirod at Olen.

    sms-group.comaurubis.com

    Credit

    Union Minière, Hazelett, Krupp

  4. 1972

    Aluminum made for house wiring

    The aluminum used for power lines, alloy 1350, crept, slowly deforming, under the screws of outlets and switches when it was used for building wire. IAEI Magazine, the electrical inspectors' journal, reports that AA-8000 series alloys were developed in the late 1960s and listed and made from 1972; the US electrical code first required them in 1987 by its account, in 1985 by Southwire's.

    LessonSouthwire calls the old metal "a poor fitting hand-me-down from another industry", and a conductor has to suit the joints it will be made into.

    iaeimagazine.orgsouthwire.com

    Credit

    Southwire claims the first such alloy, Triple E, in 1968

  5. 1974

    Man-made diamond dies

    General Electric patented a die blank of polycrystalline diamond, many small diamond crystals bonded into one piece, held in a ring of carbide (US patent 3,831,428, granted August 1974), and sold it as Compax. A 1982 GE paper says thousands of dies made from such blanks were in use eight years after GE introduced what it calls the first of them; Redies, another die maker, wrote in 2023 that the share of its dies with polycrystalline diamond cores had grown over the past 20 years.

    patents.google.comwirenet.orgumformtechnik.net

    Credit

    General Electric (Robert H. Wentorf Jr., William A. Rocco and others)

Watch for

  1. Dies that warn of wear

    Ailoys and the die maker Vassena Filiere say an edge-AI device, a small computer with acoustic sensors that listens to the die as wire passes through, is "now fully operational on production lines" and extends average die life by 10%. No customers are named.

    Achieved whena named wire maker or an outside party publishes measured die life with and without it.

    expometals.net

    Claimed by

    Ailoys and Vassena Filiere, April 2026

  2. A die box that reports

    Paramount Die says its Smart Die System puts sensors in the die box and sends their readings to a computer at the machine for AI analysis, and that some early installations ran 5% to 10% faster in the first week. Its pilot customers are confidential.

    Achieved whennamed customers report the gains themselves.

    wirenet.org

    Claimed by

    Paramount Die, August 2025

Open

  1. 01

    Robot threads the dies

    A robot that feeds the pointed end of a copper wire through a row of drawing dies and wraps it round each capstan, the driven pulley that pulls the wire through the die before it. Operators do this by hand after every break and every change of dies.

    The brief
    Credit · unclaimed
  2. 02

    An atlas of wire breaks

    A public set of labelled photographs of the broken ends of drawn copper and aluminum wire, sorted by cause, and a classifier that names the likely cause from a photo taken through a stereo microscope, a low-power microscope that shows depth.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot threads the dies

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot that feeds the pointed end of a copper wire through a row of drawing dies and wraps it round each capstan, the driven pulley that pulls the wire through the die before it. Operators do this by hand after every break and every change of dies.

Why it is still open

A Sumitomo Wiring Systems patent describes the hand routine: the operator passes the strand through each die, winds it round the next capstan and nudges the machine forward, and very fine wire is hard to thread and easily broken by the operator's own arms. The only automated threading found is a motorized trolley that Eurodraw described in 2015 for heavy prestressing-steel wire, which lays the wire into the capstan grooves and then hands the end to an operator.

patents.google.comexpometals.net

Built with what exists

A low-cost arm supported by Hugging Face's LeRobot library (Note "No download"), a wrist camera, a robot model that learns from a few demonstrations such as NVIDIA's GR00T 2 (Note "Five demonstrations per task"), and a bench rig of used dies and hand-turned capstans with no motor.

  1. First step

    Build a three-die rig from used dies and record fifty human threadings with two cameras.

  2. Done looks like

    Twenty filmed threadings of a rig with at least six dies, with a published tally of successes, wire breaks and minutes per threading, next to the same tally for a skilled person.

Open 02 · the brief

An atlas of wire breaks

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of labelled photographs of the broken ends of drawn copper and aluminum wire, sorted by cause, and a classifier that names the likely cause from a photo taken through a stereo microscope, a low-power microscope that shows depth.

Why it is still open

The reference mills use is a 1976 classification by E. H. Chia and colleagues at Southwire, sold by the Wire Association as a $15 article with electron micrographs; no open image set of drawing breaks was found. The causes matter: a survey of 673 copper wire breaks, reported by C. Raskin in 1997 and cited in a 2011 paper, put 52% of them down to inclusions, hard particles inside the metal.

wirenet.orgjmmm.material.chula.ac.th

Built with what exists

A stereo microscope or a phone macro lens, an open labelling tool such as CVAT, and an open image model such as Ultralytics YOLO11.

  1. First step

    Ask one wire mill's quality lab for fifty saved breaks with their logged causes and photograph each from two angles.

  2. Done looks like

    500 labelled break ends from at least three mills, released under an open licence, and a classifier that agrees with a metallurgist on at least 80 of a held-out 100.