BRENNEN

Industries / Energy, water and waste / Water and wastewater

Drinking water treatment

Making raw water safe to drink: straining out particles, killing germs, and meeting the limits regulators set for harmful substances.

7

Milestones achieved, from 1829 to 2026.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1829

    Sand filters serve a city

    In 1804 John Gibb built a slow sand filter, a bed of sand that water seeps down through, at his bleachery in Paisley, Scotland, and sold the extra water to the public. In 1829 James Simpson built filters for London's Chelsea Water Company, the first for a public supply according to a 1974 World Health Organization (WHO) manual, and the Metropolis Water Act of 1852 required all water taken from the Thames within 5 miles of St Paul's Cathedral to be filtered.

    LessonFilters were built to clear cloudy water before anyone knew bacteria existed, and they turned out to stop disease as well.

    literature.wolkersdorfer.info

    Credit

    John Gibb; James Simpson; Chelsea Water Company

  2. 1892

    Hamburg's cholera proves filtration

    Hamburg and neighboring Altona both drew from the Elbe River, but Hamburg only let its water settle while Altona filtered all of its supply. When the river was contaminated in 1892, cholera infected about one in thirty Hamburg residents and killed more than 7,500, while Altona "escaped almost unscathed"; the 1974 WHO manual calls this the most convincing proof that filtration works.

    LessonTwo cities on one river, differing in one treatment step, showed what that step was worth.

    literature.wolkersdorfer.info

    Credit

    the city of Altona, which filtered its whole supply

  3. 1908

    Chlorine disinfects a city supply

    In 1908 Jersey City, New Jersey, began adding chlorine, a chemical that kills germs, as the main disinfectant of its supply; the US EPA calls this the first such use. EPA credits chlorine and other disinfectants, more than filtration, with cutting waterborne disease outbreaks in the early 1900s.

    LessonA small, cheap chemical dose became the standard way to keep water safe all the way to the tap.

    archive.epa.goven.wikipedia.org

    Credit

    Jersey City's water supply; histories credit John L. Leal, who proposed it, and George Warren Fuller, who designed the plant

  4. 1974

    US passes drinking water law

    US federal drinking water standards dated from 1914 but applied only to water served on interstate carriers such as trains and ships, and a 1969 Public Health Service survey found only 60% of the systems it checked met all of them. Congress passed the Safe Drinking Water Act in 1974, and from 1976 to 1995 the share of the smallest community systems (fewer than 100 people) that treat their water rose from 33% to 69%, by EPA's surveys.

    LessonMeasuring what came out of taps, instead of assuming plants worked, made the case for national rules.

    archive.epa.gov

    Credit

    US Congress; US Environmental Protection Agency

  5. 1974

    Chlorine found to form byproducts

    In 1974 a chemist named Rook identified chloroform in chlorinated drinking water, the first known disinfection byproduct: a chemical formed when the disinfectant reacts with natural matter in the water. Chloroform and related trihalomethanes were soon found to be common in chlorinated supplies, and by 2009 more than 600 byproducts had been reported.

    LessonTreatment can add hazards as well as remove them, so utilities weigh the risk from germs against the risk from byproducts.

    ebi.ac.ukebi.ac.uk

    Credit

    Rook, as named in Susan Richardson's 2002 review; Steve Hrudey's 2009 review gives the count

  6. 1993

    Parasite slips past Milwaukee's plant

    In spring 1993 the parasite Cryptosporidium passed through Milwaukee's southern water treatment plant, where treated water grew cloudier (higher turbidity) from 23 March until the plant was shut on 9 April. Investigators estimated that 403,000 people had watery diarrhea from the outbreak (W. R. Mac Kenzie and coauthors, New England Journal of Medicine, 1994).

    LessonSome germs survive chlorine, so filters must catch them, and rising turbidity is a warning to act on.

    ebi.ac.uk

    Credit

    the investigation by Mac Kenzie and coauthors

  7. 2026

    EU caps PFAS in water

    PFAS (per- and polyfluoroalkyl substances) are a large family of man-made fluorinated chemicals. From 12 January 2026, EU Directive 2020/2184 requires member states to keep the sum of 20 listed PFAS in drinking water under 0.10 micrograms per liter; a limit of 0.50 micrograms per liter for all PFAS together applies once technical guidelines for measuring it exist.

    LessonThe EU limits PFAS as a group, while the US set limits chemical by chemical (see Watch for).

    eur-lex.europa.eu

    Credit

    European Parliament and Council of the EU (directive of 16 December 2020)

Watch for

  1. EPA proposes narrower PFAS rule

    EPA's April 2024 rule set limits for six PFAS, including 4.0 parts per trillion each for PFOA and PFOS, due by 2029. On 18 May 2026 EPA proposed keeping the PFOA and PFOS limits while letting systems request two more years, to 2031, and dropping the limits for PFHxS, PFNA, HFPO-DA (known as GenX) and the mixture limit.

    Achieved whenEPA publishes final rules and they take effect without being blocked in court.

    epa.gov

    Claimed by

    US EPA, May 2026, a direction first announced on 14 May 2025

  2. PFAS removal in New Jersey

    BioLargo, a company in Westminster, California, says its Aqueous Electrostatic Concentrator has removed PFAS from drinking water at Lake Stockholm, New Jersey, since January 2026, and that the treated water meets state and EPA standards under monitoring by the New Jersey Department of Environmental Protection and EPA. Its November 2026 release gives no removal percentages, PFAS levels or waste volumes.

    Achieved whenthe state, EPA or an independent lab publishes before-and-after PFAS results and waste volumes for the site.

    biolargo.comonestopesg.com

    Claimed by

    BioLargo, February and November 2026

Open

  1. 01

    A jar test that chooses

    A bench rig that runs jar tests and picks its own next doses. A jar test is the standard way a plant finds the right dose of coagulant, a chemical that makes fine particles clump and settle: several beakers of raw water get different doses, are stirred and left to settle, and the clearest wins. The rig would read each round's results and choose the doses for the next round itself.

    The brief
    Credit · unclaimed
  2. 02

    A scorecard for PFAS claims

    A public template for reporting what a plant-scale PFAS treatment system achieves (each PFAS before and after, flow treated, waste produced, lab method, who took the samples), and a scorecard that rates published claims against it.

    The brief
    Credit · unclaimed

Open 01 · the brief

A jar test that chooses

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench rig that runs jar tests and picks its own next doses. A jar test is the standard way a plant finds the right dose of coagulant, a chemical that makes fine particles clump and settle: several beakers of raw water get different doses, are stirred and left to settle, and the clearest wins. The rig would read each round's results and choose the doses for the next round itself.

Why it is still open

An automated jar tester built at the University of Extremadura (2017) filled, dosed, mixed, settled and read turbidity on its own, but its authors wrote that a person still had to enter the doses and mixing speeds, and that commercial testers are only partly automated. A search found automated jar testers and dose-prediction software, but no rig that chooses its own next doses.

pmc.ncbi.nlm.nih.gov

Built with what exists

A programmable six-jar stirrer; peristaltic or syringe pumps run from a Raspberry Pi or Arduino; an inline turbidity meter; Bayesian optimization, a method that picks the most informative next experiment, from open-source libraries such as BoTorch and Ax; a camera and a vision model to grade floc (the clumps) as they form.

  1. First step

    Rebuild the Extremadura rig's dosing and turbidity loop from the paper and run one full grid by hand to set the reference.

  2. Done looks like

    On ten test waters made in the lab from tap water and clay at set turbidities, the rig finds a dose within 10% of the best dose from a full hand-run grid, in fewer rounds than the grid, with every run logged in a public repository.

Open 02 · the brief

A scorecard for PFAS claims

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public template for reporting what a plant-scale PFAS treatment system achieves (each PFAS before and after, flow treated, waste produced, lab method, who took the samples), and a scorecard that rates published claims against it.

Why it is still open

Home filters can be certified by independent bodies to NSF/ANSI 53 or 58 for PFAS reduction, and EPA's guide lists them, but the guide offers nothing equivalent for utility-scale systems. BioLargo's November 2026 release on its New Jersey system (see Watch for) gives no removal percentages, PFAS levels or waste volumes. A search found no public scorecard for plant-scale claims.

epa.govbiolargo.com

Built with what exists

A web agent to gather vendor releases, utility reports and state data (see the Note "Deleting 80% to start over"); a second model that checks each figure against its source for a person to confirm (see the Note "Seven more flagged"); a spreadsheet or small web app.

  1. First step

    Draft the template and score the BioLargo claim and two others as a trial.

  2. Done looks like

    Thirty published plant-scale PFAS claims scored on the template, each linked to its sources, with every vendor invited to fill the gaps and its reply recorded.