BRENNEN

Industries / Transport and vehicles / Warehousing and distribution

Receiving

Receiving is taking goods in at the dock: unloading trucks and containers, checking what arrived against what was ordered, labeling it, and passing it on to storage.

4

Milestones achieved, from 1917 to 2023.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1917

    Powered trucks haul loads

    Employees of the Clark Equipment Company in Buchanan, Michigan, built the Tructractor to haul materials between the company's axle, drill and wheel departments. Clark calls it "the world's first internal combustion-powered industrial truck." The same Clark page names a 1924 Duat fitted with a lifting attachment as "the world's first internal combustion forklift truck," while its museum section calls the Tructractor a forklift, so Clark's own page gives two candidates for the first forklift.

    clarkmheu.com

    Credit

    Clark Equipment Company

  2. 1961

    One pallet for Europe

    A pallet is the flat wooden platform that a forklift lifts by sliding its forks underneath. In 1961 European railways, working through the International Union of Railways (UIC), agreed on a standard pallet marked "EUR," 800 by 1,200 mm (about 31.5 by 47.2 inches), and a shared pool so that pallets could be swapped rather than sent back. The pool later passed to the European Pallet Association (EPAL), and by 2011 the trade magazine Pallet Enterprise counted over 500 million pallets in it. North America uses a different size, 48 by 40 inches.

    LessonA former EPAL president told Pallet Enterprise that 1,200 by 800 mm is "one of the most inefficient sizes in common use," yet too entrenched to change, because everyone depends on it.

    palletenterprise.com

    Credit

    UIC member railways; EPAL

  3. 1980s

    Shipments announce themselves

    The 856 Ship Notice/Manifest is a message in X12, a family of standard business documents that computers exchange directly, called electronic data interchange (EDI). A supplier sends it before a shipment arrives to list what is on the truck: order details, products, packaging, markings and carrier. The trade calls it an advance ship notice (ASN), and it lets the receiving dock check cartons against a list it already has. X12 says it has been chartered by the American National Standards Institute (ANSI) "for more than 40 years."

    x12.org

    Credit

    Accredited Standards Committee X12

  4. 2023

    Robots unload trailers

    DHL Supply Chain put Stretch, a wheeled robot arm from Boston Dynamics that lifts cases of up to 50 pounds off the stack inside a trailer, into commercial use in North America in 2023, and then in the United Kingdom and Europe. In May 2025 DHL reported unloading rates "of up to 700 cases per hour" and signed a memorandum of understanding for more than 1,000 more units. A June 2025 report quoting Tim Tetzlaff, DHL's global head of digital transformation, said DHL had 10 Stretch robots unloading cases in three countries.

    LessonA memorandum for 1,000 more robots is not 1,000 robots at work; in mid-2025 DHL had 10 running.

    automatedwarehouseonline.commultimodal.org.uk

    Credit

    Boston Dynamics (robot); DHL Supply Chain (customer reporting routine use)

Watch for

  1. UPS buys Pickle robots

    Bloomberg News reported, citing people familiar with the matter, that UPS will buy about 400 truck-unloading robots from Pickle Robot for about $120 million, to be deployed at several facilities from the second half of 2026 into 2027. UPS said further purchases often depend on testing results, and Pickle declined to comment. Pickle's own website says one robot unloads a typical truck in about two hours. An analysis published on 10 November 2026 still described the deployments as expected, with no confirmation from UPS.

    Achieved whenUPS states how many Pickle robots are in routine use, at which sites, and at what measured unloading rate.

    ttnews.comlogisticsviewpoints.com

    Claimed by

    Bloomberg News, reporting on UPS, December 2025

  2. Second-generation Stretch

    Boston Dynamics says Stretch Gen 2 unloads up to 1,000 cases an hour, a rate it says depends on case weight and how neatly the cases are stacked, and runs two shifts on one battery. It says the redesign used data from more than 100,000 operating hours and "tens of millions of boxes" unloaded by the first version.

    Achieved whenA customer such as DHL reports Gen 2 robots in routine use with a measured rate over whole trailers.

    bostondynamics.com

    Claimed by

    Boston Dynamics, November 2026

Open

  1. 01

    Check a pallet from photos

    A public test of whether a vision-language model, an AI model that reads images and text together, can check a received pallet against its packing list from phone photos alone. The model counts the cases of each product, reads carton labels, and flags missing cases, extra cases, wrong products and visible damage. Pallets are stacked by hand on the floor; no forklift or powered pallet truck is used.

    The brief
    Credit · unclaimed
  2. 02

    Phone dimensioning, tested independently

    An independent, public accuracy test of measuring a carton's length, width and height at receiving with a phone's depth sensor (LiDAR or time-of-flight), against careful tape measurement. Commercial apps and an open, home-built measuring script are tested side by side.

    The brief
    Credit · unclaimed

Open 01 · the brief

Check a pallet from photos

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of whether a vision-language model, an AI model that reads images and text together, can check a received pallet against its packing list from phone photos alone. The model counts the cases of each product, reads carton labels, and flags missing cases, extra cases, wrong products and visible damage. Pallets are stacked by hand on the floor; no forklift or powered pallet truck is used.

Why it is still open

Vendors sell camera checks at receiving, and PackageX says it moved its label reading to a vision-language model, but its case study gives accuracy figures with no test set, sample size or method. No public dataset or published tally for this task turned up.

packagex.io

Built with what exists

A phone camera; a vision-language model such as Claude Fable 5.2 (see the Note "Three working devices"); a reviewer model that flags doubtful readings for a person to check (see the Note "Seven more flagged"); real or empty cartons with printed barcode labels; a spreadsheet of packing lists and a hidden answer key.

  1. First step

    Build 10 pallets from cartons on hand, write their packing lists, plant three errors, photograph them and run one model.

  2. Done looks like

    100 staged pallets, each photographed from four sides and paired with a packing list, one in three carrying one planted error (a missing case, an extra case, a wrong product or a crushed case). Published: the share of planted errors the model caught and its false alarms per clean pallet, beside the same two figures for a person working from the same photos.

Open 02 · the brief

Phone dimensioning, tested independently

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An independent, public accuracy test of measuring a carton's length, width and height at receiving with a phone's depth sensor (LiDAR or time-of-flight), against careful tape measurement. Commercial apps and an open, home-built measuring script are tested side by side.

Why it is still open

Dimensioning apps are sold, but the vendor material found gives accuracy claims (Optioryx lists its Flux app at about plus or minus 1 to 3 cm on pallets) with no reference measurement, sample size or test method. No independent study comparing phones with a tape on cartons turned up.

optioryx.com

Built with what exists

A phone or tablet with LiDAR; Apple ARKit depth data or the Android depth API; Open3D, an open-source library for 3D point data, to fit a box to the depth readings; a steel tape and a carpenter's square; trial versions of commercial apps.

  1. First step

    Collect 30 cartons, measure them by tape, and run one free or trial app on all 30.

  2. Done looks like

    200 cartons of at least 20 sizes, including small, dark, glossy, shrink-wrapped and dented ones, each measured twice by tape and three times by each method. Published: the median and 95th-percentile error per side in millimeters, the share of measurements within 10 mm of the tape, and seconds per carton.