Industries / Industrial equipment and services / Industrial services / Turnaround management
Contractors and the site
During a turnaround most of the work is done by contract crews brought in for weeks, with their own trailers, tools and supervisors, beside units that are still running.
4
Milestones achieved, from 1992 to 2024.
0
To watch for: announced, not yet confirmed outside.
1
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1992
Contractors in the safety rule
OSHA's process safety management standard, published on 1 June 1992 at 57 FR 23060, applies its contractor section to contractors doing "maintenance or repair, turnaround, major renovation, or specialty work" on or next to a covered process. The plant owner must check a contractor's safety record and tell its workers of the hazards.
Credit
US Occupational Safety and Health Administration (OSHA)
1994
A contractor safety certificate
The Dutch foundation SSVV has run VCA, a safety checklist and certificate for contractors, since 1994, by its own account. Clients in the petrochemical industry often require it, though it is not law, and SSVV is an alliance of 24 industry organisations that registers every certificate, says the Dutch government's business portal.
Credit
SSVV (Stichting Samenwerken voor Veiligheid)
2007
Trailers moved back
At Texas City in 2005 all 15 dead were contractors in or near trailers placed for turnaround work. API issued RP 753 on where to put portable buildings in process plants on 21 June 2007, after the CSB had said in April that the draft set no minimum safe distances. API's 2024 editions of RP 752, 753 and 756 cover buildings, trailers and tents, and add 62 mandatory requirements, including on occupancy during planned shutdowns.
LessonTemporary offices for turnaround crews need the same siting study as permanent buildings.
Credit
API, at the CSB's urging
2024
A turnaround crew on a live unit
On 10 October 2024 Pemex's Deer Park refinery in Texas had its sulfur unit in turnaround, isolated with 50 blinds (solid plates between flanges), and contractors from at least 10 firms at work. Four boilermakers from Repcon were moved to the running amine unit next door to remove blinds. They opened an identical pipe 5 feet from the right one and released hydrogen sulfide. One Repcon worker and one worker from another contractor died, and 13 more contract workers were taken for medical checks. The CSB found that the workers did not know they had left the turnaround unit, and that the refinery had no clear way to identify the right equipment to open.
LessonA crew moved from a shutdown unit to a live one carries the shutdown's assumptions with it.
Credit
CSB investigation, report February 2026
Open
01
Check the flange before opening
A phone app that confirms a worker is standing at the flange named on the permit before it is opened. It reads a tag or marker on the flange, compares the camera view with photos taken when the blind or isolation was planned, and gives a clear yes or no. Tested on a mock-up pipe rack with no process fluid, never on live plant.
The briefCredit · unclaimed
Open 01 · the brief
Check the flange before opening
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone app that confirms a worker is standing at the flange named on the permit before it is opened. It reads a tag or marker on the flange, compares the camera view with photos taken when the blind or isolation was planned, and gives a clear yes or no. Tested on a mock-up pipe rack with no process fluid, never on live plant.
Why it is still open
The CSB found at Deer Park that the cause was the opening of the wrong one of two identical pipes, and that the refinery had no effective method to identify the right one. Published research on tagged flanges reads QR codes on bolts to check for looseness, not to confirm which flange to open, and a search found no tested tool that does the latter.
Built with what exists
A smartphone; printed AprilTag or QR markers; an open image-matching or object-recognition model; the permit as a spreadsheet row.
First step
Build a two-pipe mock-up from the CSB's photos of the Blind 407 location and measure how often volunteers pick the wrong flange with tags alone.
Done looks like
On a mock-up with two identical pipes 5 feet apart, as at Deer Park, 20 volunteers each make 10 attempts with and without the app, and the rate of wrong-flange choices is published for both.